- 04 6月, 2013 2 次提交
-
-
由 Solomon Peachy 提交于
The only advantage of 'struct resource' is that it lets us assign names as part of the platform data. Unfortunately since we are using platform data, we are already limited to a single instance of each driver, rendering this moot. So, replace the struct resources with ints, resulting in cleaner code. This was based on a suggestion from Arnd Bergmann. Signed-off-by: NSolomon Peachy <pizza@shaftnet.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Solomon Peachy 提交于
(As suggested by Arnd Bergmann) Signed-off-by: NSolomon Peachy <pizza@shaftnet.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 5月, 2013 1 次提交
-
-
由 Solomon Peachy 提交于
Signed-off-by: NSolomon Peachy <pizza@shaftnet.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 5月, 2013 1 次提交
-
-
由 Rafał Miłecki 提交于
This is pretty much the same as rev 9, there are just 2 extra fields we know about, but are not used/stored yet anyway. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 5月, 2013 1 次提交
-
-
由 Johannes Berg 提交于
mac80211 and the Intel drivers all define crypto constants, move them to ieee80211.h instead. Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 10 5月, 2013 5 次提交
-
-
由 Alasdair G Kergon 提交于
Document iterate_devices in device-mapper.h. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Masami Hiramatsu 提交于
Modify soft-mode flag only if no other soft-mode referrer (currently only the ftrace triggers) by using a reference counter in each ftrace_event_file. Without this fix, adding and removing several different enable/disable_event triggers on the same event clear soft-mode bit from the ftrace_event_file. This also happens with a typo of glob on setting triggers. e.g. # echo vfs_symlink:enable_event:net:netif_rx > set_ftrace_filter # cat events/net/netif_rx/enable 0* # echo typo_func:enable_event:net:netif_rx > set_ftrace_filter # cat events/net/netif_rx/enable 0 # cat set_ftrace_filter #### all functions enabled #### vfs_symlink:enable_event:net:netif_rx:unlimited As above, we still have a trigger, but soft-mode is gone. Link: http://lkml.kernel.org/r/20130509054429.30398.7464.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: David Sharp <dhsharp@google.com> Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Fix a deadlock on ftrace_regex_lock which happens when setting an enable_event trigger on dynamic kprobe event as below. ---- sh-2.05b# echo p vfs_symlink > kprobe_events sh-2.05b# echo vfs_symlink:enable_event:kprobes:p_vfs_symlink_0 > set_ftrace_filter ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #35 Not tainted --------------------------------------------- sh/72 is trying to acquire lock: (ftrace_regex_lock){+.+.+.}, at: [<ffffffff810ba6c1>] ftrace_set_hash+0x81/0x1f0 but task is already holding lock: (ftrace_regex_lock){+.+.+.}, at: [<ffffffff810b7cbd>] ftrace_regex_write.isra.29.part.30+0x3d/0x220 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(ftrace_regex_lock); lock(ftrace_regex_lock); *** DEADLOCK *** ---- To fix that, this introduces a finer regex_lock for each ftrace_ops. ftrace_regex_lock is too big of a lock which protects all filter/notrace_hash operations, but it doesn't need to be a global lock after supporting multiple ftrace_ops because each ftrace_ops has its own filter/notrace_hash. Link: http://lkml.kernel.org/r/20130509054417.30398.84254.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> [ Added initialization flag and automate mutex initialization for non ftrace.c ftrace_probes. ] Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Fabio Estevam 提交于
Since commit 657eee7d (media: coda: use genalloc API) the following build error happens with imx_v4_v5_defconfig: drivers/built-in.o: In function 'coda_remove': clk-composite.c:(.text+0x112180): undefined reference to 'gen_pool_free' drivers/built-in.o: In function 'coda_probe': clk-composite.c:(.text+0x112310): undefined reference to 'of_get_named_gen_pool' clk-composite.c:(.text+0x1123f4): undefined reference to 'gen_pool_alloc' clk-composite.c:(.text+0x11240c): undefined reference to 'gen_pool_virt_to_phys' clk-composite.c:(.text+0x112458): undefined reference to 'dev_get_gen_pool' Select GENERIC_ALLOCATOR and get rid of the custom IRAM_ALLOC. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 5月, 2013 1 次提交
-
-
由 Dan Williams 提交于
Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not. A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend. Signed-off-by: NDan Williams <dcbw@redhat.com> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2013 17 次提交
-
-
由 Matthew Wilcox 提交于
Add definitions for the three Firmware Activate actions, and change the SCSI translation code to construct the command into a temporary variable instead of translating the endianness back-and-forth. Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: NVishal Verma <vishal.l.verma@linux.intel.com>
-
由 Kent Overstreet 提交于
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Thanks to Zach Brown's work to rip out the retry infrastructure, we don't need this anymore - ki_retry was only called right after the kiocb was initialized. This also refactors and trims some duplicated code, as well as cleaning up the refcounting/error handling a bit. [akpm@linux-foundation.org: use fmode_t in aio_run_iocb()] [akpm@linux-foundation.org: fix file_start_write/file_end_write tests] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
ki_key wasn't actually used for anything previously - it was always 0. Drop it to trim struct kiocb a bit. Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
audit rule additions containing "-F auid!=4294967295" were failing with EINVAL because of a regression caused by e1760bd5. Apparently some userland audit rule sets want to know if loginuid uid has been set and are using a test for auid != 4294967295 to determine that. In practice that is a horrible way to ask if a value has been set, because it relies on subtle implementation details and will break every time the uid implementation in the kernel changes. So add a clean way to test if the audit loginuid has been set, and silently convert the old idiom to the cleaner and more comprehensible new idiom. Cc: <stable@vger.kernel.org> # 3.7 Reported-By: NRichard Guy Briggs <rgb@redhat.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Tested-by: NRichard Guy Briggs <rgb@redhat.com> Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Kent Overstreet 提交于
Previously, allocating a kiocb required touching quite a few global (well, per kioctx) cachelines... so batching up allocation to amortize those was worthwhile. But we've gotten rid of some of those, and in another couple of patches kiocb allocation won't require writing to any shared cachelines, so that means we can just rip this code out. Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Cancelling kiocbs requires adding them to a per kioctx linked list, which is one of the few things we need to take the kioctx lock for in the fast path. But most kiocbs can't be cancelled - so if we just do this lazily, we can avoid quite a bit of locking overhead. While we're at it, instead of using a flag bit switch to using ki_cancel itself to indicate that a kiocb has been cancelled/completed. This lets us get rid of ki_flags entirely. [akpm@linux-foundation.org: remove buggy BUG()] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Analagous to wait_event_timeout() and friends, this adds wait_event_hrtimeout() and wait_event_interruptible_hrtimeout(). Note that unlike the versions that use regular timers, these don't return the amount of time remaining when they return - instead, they return 0 or -ETIME if they timed out. because I was uncomfortable with the semantics of doing it the other way (that I could get it right, anyways). If the timer expires, there's no real guarantee that expire_time - current_time would be <= 0 - due to timer slack certainly, and I'm not sure I want to know the implications of the different clock bases in hrtimers. If the timer does expire and the code calculates that the time remaining is nonnegative, that could be even worse if the calling code then reuses that timeout. Probably safer to just return 0 then, but I could imagine weird bugs or at least unintended behaviour arising from that too. I came to the conclusion that if other users end up actually needing the amount of time remaining, the sanest thing to do would be to create a version that uses absolute timeouts instead of relative. [akpm@linux-foundation.org: fix description of `timeout' arg] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Freeing a kiocb needed to touch the kioctx for three things: * Pull it off the reqs_active list * Decrementing reqs_active * Issuing a wakeup, if the kioctx was in the process of being freed. This patch moves these to aio_complete(), for a couple reasons: * aio_complete() already has to issue the wakeup, so if we drop the kioctx refcount before aio_complete does its wakeup we don't have to do it twice. * aio_complete currently has to take the kioctx lock, so it makes sense for it to pull the kiocb off the reqs_active list too. * A later patch is going to change reqs_active to include unreaped completions - this will mean allocating a kiocb doesn't have to look at the ringbuffer. So taking the decrement of reqs_active out of kiocb_free() is useful prep work for that patch. This doesn't really affect cancellation, since existing (usb) code that implements a cancel function still calls aio_complete() - we just have to make sure that aio_complete does the necessary teardown for cancelled kiocbs. It does affect code paths where we free kiocbs that were never submitted; they need to decrement reqs_active and pull the kiocb off the reqs_active list. This occurs in two places: kiocb_batch_free(), which is going away in a later patch, and the error path in io_submit_one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Nothing used the return value, and it probably wasn't possible to use it safely for the locked versions (aio_complete(), aio_put_req()). Just kill it. Signed-off-by: NKent Overstreet <koverstreet@google.com> Acked-by: NZach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zach Brown 提交于
This removes the retry-based AIO infrastructure now that nothing in tree is using it. We want to remove retry-based AIO because it is fundemantally unsafe. It retries IO submission from a kernel thread that has only assumed the mm of the submitting task. All other task_struct references in the IO submission path will see the kernel thread, not the submitting task. This design flaw means that nothing of any meaningful complexity can use retry-based AIO. This removes all the code and data associated with the retry machinery. The most significant benefit of this is the removal of the locking around the unused run list in the submission path. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NKent Overstreet <koverstreet@google.com> Signed-off-by: NZach Brown <zab@redhat.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zach Brown 提交于
Signed-off-by: NZach Brown <zab@redhat.com> Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
After finishing a naming transition, remove unused backward compatibility wrapper macros Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
The current kernel returns -EINVAL unless a given mmap length is "almost" hugepage aligned. This is because in sys_mmap_pgoff() the given length is passed to vm_mmap_pgoff() as it is without being aligned with hugepage boundary. This is a regression introduced in commit 40716e29 ("hugetlbfs: fix alignment of huge page requests"), where alignment code is pushed into hugetlb_file_setup() and the variable len in caller side is not changed. To fix this, this patch partially reverts that commit, and adds alignment code in caller side. And it also introduces hstate_sizelog() in order to get proper hstate to specified hugepage size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881 [akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n] Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reported-by: <iceman_dvd@yahoo.com> Cc: Steven Truelove <steven.truelove@utoronto.ca> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
That nameless-function-arguments thing drives me batty. Fix. Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anatol Pomozov 提交于
- make warning smp-safe - result of atomic _unless_zero functions should be checked by caller to avoid use-after-free error - trivial whitespace fix. Link: https://lkml.org/lkml/2013/4/12/391 Tested: compile x86, boot machine and run xfstests Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com> [ Removed line-break, changed to use WARN_ON_ONCE() - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 5月, 2013 3 次提交
-
-
由 Al Viro 提交于
same story as with the previous patches - note that return value of blkdev_close() is lost, since there's nowhere the caller (__fput()) could return it to. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Trond Myklebust 提交于
The main reason for doing this is will be to allow for an asynchronous RPC mode that we can use for freeing lock stateids as per section 8.2.4 of RFC5661. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 5月, 2013 4 次提交
-
-
由 Al Viro 提交于
The same story as with fib_trie patch - vfree() from RCU callbacks is legitimate now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Kosina 提交于
Commit 2353f2be ("HID: protect hid_debug_list") introduced mutex locking around debug_list access to prevent SMP races when debugfs nodes are being operated upon by multiple userspace processess. mutex is not a proper synchronization primitive though, as the hid-debug callbacks are being called from atomic contexts. We also have to be careful about disabling IRQs when taking the lock to prevent deadlock against IRQ handlers. Benjamin reports this has also been reported in RH bugzilla as bug #958935. =============================== [ INFO: suspicious RCU usage. ] 3.9.0+ #94 Not tainted ------------------------------- include/linux/rcupdate.h:476 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by Xorg/5502: #0: (&evdev->mutex){+.+...}, at: [<ffffffff81512c3d>] evdev_write+0x6d/0x160 #1: (&(&dev->event_lock)->rlock#2){-.-...}, at: [<ffffffff8150dd9b>] input_inject_event+0x5b/0x230 #2: (rcu_read_lock){.+.+..}, at: [<ffffffff8150dd82>] input_inject_event+0x42/0x230 #3: (&(&usbhid->lock)->rlock){-.....}, at: [<ffffffff81565289>] usb_hidinput_input_event+0x89/0x120 stack backtrace: CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012 0000000000000001 ffff8800689c7c38 ffffffff816f249f ffff8800689c7c68 ffffffff810acb1d 0000000000000000 ffffffff81a03ac7 000000000000019d 0000000000000000 ffff8800689c7c90 ffffffff8107cda7 0000000000000000 Call Trace: [<ffffffff816f249f>] dump_stack+0x19/0x1b [<ffffffff810acb1d>] lockdep_rcu_suspicious+0xfd/0x130 [<ffffffff8107cda7>] __might_sleep+0xc7/0x230 [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0 [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640 [<ffffffff81553cc4>] hid_debug_event+0x34/0x100 [<ffffffff81554197>] hid_dump_input+0x67/0xa0 [<ffffffff81556430>] hid_set_field+0x50/0x120 [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120 [<ffffffff8150d89e>] input_handle_event+0x8e/0x530 [<ffffffff8150df10>] input_inject_event+0x1d0/0x230 [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230 [<ffffffff81512cae>] evdev_write+0xde/0x160 [<ffffffff81185038>] vfs_write+0xc8/0x1f0 [<ffffffff81185535>] SyS_write+0x55/0xa0 [<ffffffff81704482>] system_call_fastpath+0x16/0x1b BUG: sleeping function called from invalid context at kernel/mutex.c:413 in_atomic(): 1, irqs_disabled(): 1, pid: 5502, name: Xorg INFO: lockdep is turned off. irq event stamp: 1098574 hardirqs last enabled at (1098573): [<ffffffff816fb53f>] _raw_spin_unlock_irqrestore+0x3f/0x70 hardirqs last disabled at (1098574): [<ffffffff816faaf5>] _raw_spin_lock_irqsave+0x25/0xa0 softirqs last enabled at (1098306): [<ffffffff8104971f>] __do_softirq+0x18f/0x3c0 softirqs last disabled at (1097867): [<ffffffff81049ad5>] irq_exit+0xa5/0xb0 CPU: 0 PID: 5502 Comm: Xorg Not tainted 3.9.0+ #94 Hardware name: Dell Inc. OptiPlex 390/0M5DCD, BIOS A09 07/24/2012 ffffffff81a03ac7 ffff8800689c7c68 ffffffff816f249f ffff8800689c7c90 ffffffff8107ce60 0000000000000000 ffff8800689c7fd8 ffff88006a62c800 ffff8800689c7d10 ffffffff816f7770 ffff8800689c7d00 ffffffff81312ac4 Call Trace: [<ffffffff816f249f>] dump_stack+0x19/0x1b [<ffffffff8107ce60>] __might_sleep+0x180/0x230 [<ffffffff816f7770>] mutex_lock_nested+0x40/0x3a0 [<ffffffff81312ac4>] ? vsnprintf+0x354/0x640 [<ffffffff81553cc4>] hid_debug_event+0x34/0x100 [<ffffffff81554197>] hid_dump_input+0x67/0xa0 [<ffffffff81556430>] hid_set_field+0x50/0x120 [<ffffffff8156529a>] usb_hidinput_input_event+0x9a/0x120 [<ffffffff8150d89e>] input_handle_event+0x8e/0x530 [<ffffffff8150df10>] input_inject_event+0x1d0/0x230 [<ffffffff8150dd82>] ? input_inject_event+0x42/0x230 [<ffffffff81512cae>] evdev_write+0xde/0x160 [<ffffffff81185038>] vfs_write+0xc8/0x1f0 [<ffffffff81185535>] SyS_write+0x55/0xa0 [<ffffffff81704482>] system_call_fastpath+0x16/0x1b Reported-by: Nmajianpeng <majianpeng@gmail.com> Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Christoph Lameter 提交于
The inline path seems to have changed the SLAB behavior for very large kmalloc allocations with commit e3366016 ("slab: Use common kmalloc_index/kmalloc_size functions"). This patch restores the old behavior but also adds diagnostics so that we can figure where in the code these large allocations occur. Reported-and-tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NChristoph Lameter <cl@linux.com> Link: http://lkml.kernel.org/r/201305040348.CIF81716.OStQOHFJMFLOVF@I-love.SAKURA.ne.jp [ penberg@kernel.org: use WARN_ON_ONCE ] Signed-off-by: NPekka Enberg <penberg@kernel.org>
-
由 Al Viro 提交于
Both existing instances always return 0 and even if they didn't, the value would be lost on the way out. Just don't bother... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 05 5月, 2013 2 次提交
-
-
由 Jan Kara 提交于
When BSD process accounting is enabled and logs information to a filesystem which gets frozen, system easily becomes unusable because each attempt to account process information blocks. Thus e.g. every task gets blocked in exit. It seems better to drop accounting information (which can already happen when filesystem is running out of space) instead of locking system up. So we just skip the write if the filesystem is frozen. Reported-by: NNikola Ciprich <nikola.ciprich@linuxbox.cz> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Geert Uytterhoeven 提交于
Commit 59d8053f ("proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h") broke Apple NuBus support: drivers/nubus/proc.c: In function ‘nubus_proc_detach_device’: drivers/nubus/proc.c:156: error: dereferencing pointer to incomplete type drivers/nubus/proc.c:158: error: dereferencing pointer to incomplete type Fortunately nubus_proc_detach_device() is unused, and appears to have never been used, so just remove it. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 5月, 2013 1 次提交
-
-
由 Frederic Weisbecker 提交于
The scheduler doesn't yet fully support environments with a single task running without a periodic tick. In order to ensure we still maintain the duties of scheduler_tick(), keep at least 1 tick per second. This makes sure that we keep the progression of various scheduler accounting and background maintainance even with a very low granularity. Examples include cpu load, sched average, CFS entity vruntime, avenrun and events such as load balancing, amongst other details handled in sched_class::task_tick(). This limitation will be removed in the future once we get these individual items to work in full dynticks CPUs. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 03 5月, 2013 2 次提交
-
-
由 Keith Busch 提交于
This adds support for namespaces with separate meta-data formats in the submit io ioctl. The meta-data buffer has to be a contiguous, so such a buffer is allocated and the mapped user pages are copied to/from this buffer for write/read commands. Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Keith Busch 提交于
We have an nvme device that has a concept of a stripe size. IO requests that do not transfer data crossing a stripe boundary has greater performance compared to IO that does cross it. This patch sets the stripe size for the device if the device and vendor ids match one with this feature and splits IO requests that cross the stripe boundary. Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-