It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.

In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Function gfs2_block_map was often looking up the disk inode twice.
This optimizes it so that only does it once.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch is just a cleanup.  Function gfs2_get_block() just calls
function gfs2_block_map reversing the last two parameters.  By
reversing the parameters, gfs2_block_map() may be called directly
and function gfs2_get_block may be eliminated altogether.
Since this function is done for every block operation,
this streamlines the code and makes it a little bit more efficient.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds a function "gfs2_is_writeback()" along the lines of the
existing "gfs2_is_jdata()" in order to clean up the code and make
the various tests for the inode mode more obvious. It also fixes
the PageChecked() logic where we were resetting the flag too early
in the case of an error path.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Journaled data is marked dirty by gfs2_unpin and should not be marked
dirty here.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Current GFS2 setattr call unconditionally invokes do_shrink even the
requested size and actual file size are equal. This has generated large
amount of extra IOs found during NFS benchmark runs. This patch moves
the relevant logic out of shrink code path. Since setattr is a system
call, the time stamps update is still required.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Code segment inside gfs2_block_truncate_page() doesn't set the return
code correctly. This causes NFSD erroneously returns EIO back to client
with setattr procedure call (truncate error).
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This adds a nanosecond timestamp feature to the GFS2 filesystem. Due
to the way that the on-disk format works, older filesystems will just
appear to have this field set to zero. When mounted by an older version
of GFS2, the filesystem will simply ignore the extra fields so that
it will again appear to have whole second resolution, so that its
trivially backward compatible.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes some sign issues which were accidentally introduced
into the quota & statfs code during the endianess annotation process.
Also included is a general clean up which moves all of the _host
structures out of gfs2_ondisk.h (where they should not have been to
start with) and into the places where they are actually used (often only
one place). Also those _host structures which are not required any more
are removed entirely (which is the eventual plan for all of them).

The conversion routines from ondisk.c are also moved into the places
where they are actually used, which for almost every one, was just one
single place, so all those are now static functions. This also cleans up
the end of gfs2_ondisk.h which no longer needs the #ifdef __KERNEL__.

The net result is a reduction of about 100 lines of code, many functions
now marked static plus the bug fixes as mentioned above. For good
measure I ran the code through sparse after making these changes to
check that there are no warnings generated.

This fixes Red Hat bz #239686
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch cleans up the inode number handling code. The main difference
is that instead of looking up the inodes using a struct gfs2_inum_host
we now use just the no_addr member of this structure. The tests relating
to no_formal_ino can then be done by the calling code. This has
advantages in that we want to do different things in different code
paths if the no_formal_ino doesn't match. In the NFS patch we want to
return -ESTALE, but in the ->lookup() path, its a bug in the fs if the
no_formal_ino doesn't match and thus we can withdraw in this case.

In order to later fix bz #201012, we need to be able to look up an inode
without knowing no_formal_ino, as the only information that is known to
us is the on-disk location of the inode in question.

This patch will also help us to fix bz #236099 at a later date by
cleaning up a lot of the code in that area.

There are no user visible changes as a result of this patch and there
are no changes to the on-disk format either.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Use zero_user_page() instead of open-coding it.
Signed-off-by: NNate Diller <nate.diller@gmail.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I was looking something else up and came across this...

I don't honestly have a good reason to change it other than to make it
like every other Linux filesystem in this regard.  ;-)  It doesn't
functionally change anything, but makes some lines shorter. :)

I'm also curious; why does gfs2 have 64-bits of on-disk timestamps, but
not in timespec_t format, and only stores second resolutions?  Seems like
you're halfway to sub-second resolutions already.

I suppose if that gets implemented then all of the below should
instead be CURRENT_TIME not CURRENT_TIME_SEC.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This moves the locking for bmap into the bmap function itself
rather than using a wrapper function. It also fixes a bug where
the boundary flag was set on the wrong bh. Also the flags on
the mapped bh are reset earlier in the function to ensure that
they are 100% correct on the error path.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This function wasn't really doing the right thing. There was no need
to update the inode size at this point and the updating of the
i_blocks field has now been moved to the places where di_blocks is
updated. A result of this patch and some those preceeding it is that
unlocking a glock is now a much more efficient process, since there
is no longer any requirement to copy data from the gfs2 inode into
the vfs inode at this point.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Remove the di_[amc]time fields and use inode->i_[amc]time
fields instead. This saves 24 bytes from the gfs2_inode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Remove duplicate di_uid/di_gid fields in favour of using
inode->i_uid/inode->i_gid instead. This saves 8 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This removes the duplicate di_mode field in favour of using the
inode->i_mode field. This saves 4 bytes.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Everywhere this was called, a struct gfs2_inode was available,
but despite that, it was always called with a struct gfs2_dinode
as an argument. By making this change it paves the way to start
eliminating fields duplicated between the kernel's struct inode
and the struct gfs2_dinode.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This fix means that bmap will map extents of the length requested
by the VFS rather than guessing at it, or just mapping one block
at a time. The other callers of gfs2_block_map are audited to ensure
they send the correct max extent lengths (i.e. set bh->b_size correctly).
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

In many places GFS2 was calling the endian conversion routines
for an inode even when only a single field, or a few fields might
have changed. As a result we were copying lots of data needlessly.

This patch replaces those calls with conversion of just the
required fields in each case. This should be faster and easier
to understand. There are still other places which suffer from this
problem, but this is a start in the right direction.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As per Andrew Morton's request, removed trailing whitespace.

Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix a bug in the directory reading code, where we might have dereferenced
a NULL pointer in case of OOM. Updated the directory code to use the new
& improved version of gfs2_meta_ra() which now returns the first block
that was being read. Previously it was releasing it requiring following
code to grab the block again at each point it was called.

Also turned off readahead on directory lookups since we are reading a
hash table, and therefore reading the entries in order is very
unlikely. Readahead is still used for all other calls to the
directory reading function (e.g. when growing the hash table).

Removed the DIO_START constant. Everywhere this was used, it was
used to unconditionally start i/o aside from a couple of places, so
I've removed it and made the couple of exceptions to this rule into
separate functions.

Also hunted through the other DIO flags and removed them as arguments
from functions which were always called with the same combination of
arguments.

Updated gfs2_meta_indirect_buffer to be a bit more efficient and
hopefully also be a bit easier to read.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.

Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.

Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.
Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

i_blksize got removed in -mm.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is a tidy up of the GFS2 bmap code. The main change is that the
bh is passed to gfs2_block_map allowing the flags to be set directly
rather than having to repeat that code several times in ops_address.c.

At the same time, the extent mapping code from gfs2_extent_map has
been moved into gfs2_block_map. This allows all calls to gfs2_block_map
to map extents in the case that no allocation is taking place. As a
result reads and non-allocating writes should be faster. A quick test
with postmark appears to support this.

There is a limit on the number of blocks mapped in a single bmap
call in that it will only ever map blocks which are pointed to
from a single pointer block. So in other words, it will never try
to do additional i/o in order to satisfy read-ahead. The maximum
number of blocks is thus somewhat less than 512 (the GFS2 4k block
size minus the header divided by sizeof(u64)). I've further limited
the mapping of "normal" blocks to 32 blocks (to avoid extra work)
since readpages() will currently read a maximum of 32 blocks ahead (128k).

Some further work will probably be needed to set a suitable value
for DIO as well, but for now thats left at the maximum 512 (see
ops_address.c:gfs2_get_block_direct).

There is probably a lot more that can be done to improve bmap for GFS2,
but this is a good first step.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Remove redundant brackets
Signed-off-by: NJan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The remains of the changes for Jan Engelhardt's third email. Remove
a cast and tidy up gfs2_inode_attr_in.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This makes all fixed size types have consistent names.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This makes everything consistent.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As per Jan Engelhardt's third set of comments, this make various
code style changes and moves the structures from format.h into
super.c, which was the only place that format.h was actually used.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The remaining routines in page.c were all only used in one other
file, so they are now moved into the files where they are referenced
and made static. Thus page.[ch] are no longer required.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Tidy up gfs2_unstuffer_page by:

 a) Moving it into bmap.c
 b) Making it static
 c) Calling it directly from gfs2_unstuff_dinode
 d) Updating all callers of gfs2_unstuff_dinode due to one less
    required argument.

It doesn't change the behaviour at all.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch fixes the way we have been dealing with unlinked,
but still open files. It removes all limits (other than memory
for inodes, as per every other filesystem) on numbers of these
which we can support on GFS2. It also means that (like other
fs) its the responsibility of the last process to close the file
to deallocate the storage, rather than the person who did the
unlinking. Note that with GFS2, those two events might take place
on different nodes.

Also there are a number of other changes:

 o We use the Linux inode subsystem as it was intended to be
used, wrt allocating GFS2 inodes
 o The Linux inode cache is now the point which we use for
local enforcement of only holding one copy of the inode in
core at once (previous to this we used the glock layer).
 o We no longer use the unlinked "special" file. We just ignore it
completely. This makes unlinking more efficient.
 o We now use the 4th block allocation state. The previously unused
state is used to track unlinked but still open inodes.
 o gfs2_inoded is no longer needed
 o Several fields are now no longer needed (and removed) from the in
core struct gfs2_inode
 o Several fields are no longer needed (and removed) from the in core
superblock

There are a number of future possible optimisations and clean ups
which have been made possible by this patch.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We no longer use semaphores, everything has been converted to
mutex or rwsem, so we don't need to include this header any more.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The original code ordered the blocks allocated in the build_height
routine backwards causing excessive disk seeks during a read of the
metadata. This patch reverses the order to try and reduce disk seeks.

Example: A five level metadata tree, I = Inode, P = Pointers, D = Data

You need to read the blocks in the order:

I P5 P4 P3 P2 P1 D

in order to read a single data block. The new code now orders the blocks
in this way. The old code used to order them as:

I P1 P2 P3 P4 P5 D

requiring two extra seeks on average. Note that for files which are
grown by gradual extension rather than by truncate or by llseek/write
at a large offset, this doesn't apply. In the case of writing to a
file linearly, this routine will only be called upon to extend the
height of the tree by one block at a time, so the ordering is
determined by when its called rather than by the internals of the
routine itself. Optimising that part of the ordering is a much
harder problem.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>