Commit 8439e62a ("arm64: mm: use bit ops rather than arithmetic in
pa/va translations") changed the boundary check against PAGE_OFFSET from
an arithmetic comparison to a bit test. This means we now silently assume
that PAGE_OFFSET is a power of 2 that divides the kernel virtual address
space into two equal halves. So make that assumption explicit.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In order to reduce the risk of a bad merge, let's move the new
kvm_call_hyp back to its original location in the file. This has
zero impact from a code point of view.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Commit c031a421 ("arm64: kaslr: randomize the linear region")
implements randomization of the linear region, by subtracting a random
multiple of PUD_SIZE from memstart_addr. This causes the virtual mapping
of system RAM to move upwards in the linear region, and at the same time
causes memstart_addr to assume a value which may be negative if the offset
of system RAM in the physical space is smaller than its offset relative to
PAGE_OFFSET in the virtual space.

Since memstart_addr is effectively an offset now, redefine its type as s64
so that expressions involving shifting or division preserve its sign.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In the boot log, instead of listing .init first, list .text, .rodata,
.init and .data in the same order they appear in memory
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The LSE atomics implementation uses runtime patching to patch in calls
to out of line non-LSE atomics implementations on cores that lack hardware
support for LSE. To avoid paying the overhead cost of a function call even
if no call ends up being made, the bl instruction is kept invisible to the
compiler, and the out of line implementations preserve all registers, not
just the ones that they are required to preserve as per the AAPCS64.

However, commit fd045f6c ("arm64: add support for module PLTs") added
support for routing branch instructions via veneers if the branch target
offset exceeds the range of the ordinary relative branch instructions.
Since this deals with jump and call instructions that are exposed to ELF
relocations, the PLT code uses x16 to hold the address of the branch target
when it performs an indirect branch-to-register, something which is
explicitly allowed by the AAPCS64 (and ordinary compiler generated code
does not expect register x16 or x17 to retain their values across a bl
instruction).

Since the lse runtime patched bl instructions don't adhere to the AAPCS64,
they don't deal with this clobbering of registers x16 and x17. So add them
to the clobber list of the asm() statements that perform the call
instructions, and drop x16 and x17 from the list of registers that are
callee saved in the out of line non-LSE implementations.

In addition, since we have given these functions two scratch registers,
they no longer need to stack/unstack temp registers.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[will: factored clobber list into #define, updated Makefile comment]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Use VA_START macro in asm/memory.h instead of private LOWEST_ADDR
definition in dump.c.
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

UAO is a feature of ARMv8.2, so add a submenu like we have for 8.1.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When secondary cpus are booted through the ACPI parking protocol, the
booted cpu should check that FW has correctly cleared its mailbox entry
point value to make sure the boot process was correctly executed.
The entry point check is carried in the cpu_ops->cpu_postboot method, that
is executed by secondary cpus when entering the kernel with irqs disabled.

The ACPI parking protocol cpu_ops maps/unmaps the mailboxes on the
primary CPU to trigger secondary boot in the cpu_ops->cpu_boot method
and on secondary processors to carry out FW checks on the booted CPU
to verify the boot protocol was successfully executed in the
cpu_ops->cpu_postboot method.

Therefore, the cpu_ops->cpu_postboot method is forced to ioremap/unmap the
mailboxes, which is wrong in that ioremap cannot be safely be carried out
with irqs disabled.

To fix this issue, this patch reshuffles the code so that the mailboxes
are still mapped after the boot processor executes the cpu_ops->cpu_boot
method for a given cpu, and the VA at which a mailbox is mapped for a given
cpu is stashed in the per-cpu data struct so that secondary cpus can
retrieve them in the cpu_ops->cpu_postboot and complete the required
FW checks.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: NItaru Kitayama <itaru.kitayama@riken.jp>
Tested-by: NLoc Ho <lho@apm.com>
Tested-by: NItaru Kitayama <itaru.kitayama@riken.jp>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Loc Ho <lho@apm.com>
Cc: Itaru Kitayama <itaru.kitayama@riken.jp>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Al Stone <ahs3@redhat.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

ARMv8.2 extensions [1] include an optional feature, which supports
half precision(16bit) floating point/asimd data processing
instructions. This patch adds support for detecting and exposing
the same to the userspace via HWCAPs

[1] https://community.arm.com/groups/processors/blog/2016/01/05/armv8-a-architecture-evolutionSigned-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The asm-generic fixmap.h depends on each architecture's fixmap.h to pull
in the definition of PAGE_KERNEL_RO, if this exists. In the absence of
this, FIXMAP_PAGE_RO will not be defined. In mm/early_ioremap.c the
definition of early_memremap_ro is predicated on FIXMAP_PAGE_RO being
defined.

Currently, the arm64 fixmap.h doesn't include pgtable.h for the
definition of PAGE_KERNEL_RO, and as a knock-on effect early_memremap_ro
is not always defined, leading to link-time failures when it is used.
This has been observed with defconfig on next-20160226.

Unfortunately, as pgtable.h includes fixmap.h, adding the include
introduces a circular dependency, which is just as fragile.

Instead, this patch factors out PAGE_KERNEL_RO and other prot
definitions into a new pgtable-prot header which can be included by poth
pgtable.h and fixmap.h, avoiding the  circular dependency, and ensuring
that early_memremap_ro is alwyas defined where it is used.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reported-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
instructions may cause the icache to become corrupted if it contains
data for a non-current ASID.

This patch implements the workaround (which invalidates the local
icache when switching the mm) by using code patching.
Signed-off-by: NAndrew Pinski <apinski@cavium.com>
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently the .rodata section is actually still executable when DEBUG_RODATA
is enabled. This changes that so the .rodata is actually read only, no execute.
It also adds the .rodata section to the mem_init banner.
Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: added vm_struct vmlinux_rodata in map_kernel()]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Remove the unnecessary boundary check since there is a huge
gap between user and kernel address that they would never overlap.
(arm64 does not have enough levels of page tables to cover 64-bit
virtual address)

See Documentation/arm64/memory.txt
Signed-off-by: NMiles Chen <miles.chen@mediatek.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In such configuration, Linux uses only two pages of page tables and
__pud_populate() should not be used. However, the BUILD_BUG() triggers
since pud_sect() is still defined and the compiler cannot eliminate such
code, even though at run-time it should not be triggered. This patch
extends the #ifdef ARM64_64K_PAGES condition for pud_sect to include
PGTABLE_LEVELS < 3.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Now that we have a clear understanding of the sign of a feature,
rename the routines to reflect the sign, so that it is not misused.
The cpuid_feature_extract_field() now accepts a 'sign' parameter.
Signed-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Use the appropriate accessor for the feature bit by keeping
track of the sign of the feature
Signed-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

There is a confusion on whether the values of a feature are signed
or not in ARM. This is not clearly mentioned in the ARM ARM either.
We have dealt most of the bits as signed so far, and marked the
rest as unsigned explicitly. This fixed in ARM ARM and will be rolled
out soon.

Here is the criteria in a nutshell:

1) The fields, which are either signed or unsigned, use increasing
   numerical values to indicate an increase in functionality. Thus, if a value
   of 0x1 indicates the presence of some instructions, then the 0x2 value will
   indicate the presence of those instructions plus some additional instructions
   or functionality.

2) For ID field values where the value 0x0 defines that a feature is not present,
   the number is an unsigned value.

3) For some features where the feature was made optional or removed after the
   start of the definition of the architecture, the value 0x0 is used to
   indicate the presence of a feature, and 0xF indicates the absence of the
   feature. In these cases, the fields are, in effect, holding signed values.

So with these rules applied, we have only the following fields which are signed and
the rest are unsigned.

 a) ID_AA64PFR0_EL1: {FP, ASIMD}
 b) ID_AA64MMFR0_EL1: {TGran4K, TGran64K}
 c) ID_AA64DFR0_EL1: PMUVer (0xf - PMUv3 not implemented)
 d) ID_DFR0_EL1: PerfMon
 e) ID_MMFR0_EL1: {InnerShr, OuterShr}
Signed-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Correct the feature bit entries for :
  ID_DFR0
  ID_MMFR0

to fix the default safe value for some of the bits.
Signed-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Adds a hook for checking whether a secondary CPU has the
features used already by the kernel during early boot, based
on the boot CPU and plugs in the check for ASID size.

The ID_AA64MMFR0_EL1:ASIDBits determines the size of the mm context
id and is used in the early boot to make decisions. The value is
picked up from the Boot CPU and cannot be delayed until other CPUs
are up. If a secondary CPU has a smaller size than that of the Boot
CPU, things will break horribly and the usual SANITY check is not good
enough to prevent the system from crashing. So, crash the system with
enough information.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add a helper to extract ASIDBits on the current cpu

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We verify the capabilities of the secondary CPUs only when
hotplug is enabled. The boot time activated CPUs do not
go through the verification by checking whether the system
wide capabilities were initialised or not.

This patch removes the capability check dependency on CONFIG_HOTPLUG_CPU,
to make sure that all the secondary CPUs go through the check.
The boot time activated CPUs will still skip the system wide
capability check. The plan is to hook in a check for CPU features
used by the kernel at early boot up, based on the Boot CPU values.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

A secondary CPU could fail to come online due to insufficient
capabilities and could simply die or loop in the kernel.
e.g, a CPU with no support for the selected kernel PAGE_SIZE
loops in kernel with MMU turned off.
or a hotplugged CPU which doesn't have one of the advertised
system capability will die during the activation.

There is no way to synchronise the status of the failing CPU
back to the master. This patch solves the issue by adding a
field to the secondary_data which can be updated by the failing
CPU. If the secondary CPU fails even before turning the MMU on,
it updates the status in a special variable reserved in the head.txt
section to make sure that the update can be cache invalidated safely
without possible sharing of cache write back granule.

Here are the possible states :

 -1. CPU_MMU_OFF - Initial value set by the master CPU, this value
indicates that the CPU could not turn the MMU on, hence the status
could not be reliably updated in the secondary_data. Instead, the
CPU has updated the status @ __early_cpu_boot_status.

 0. CPU_BOOT_SUCCESS - CPU has booted successfully.

 1. CPU_KILL_ME - CPU has invoked cpu_ops->die, indicating the
master CPU to synchronise by issuing a cpu_ops->cpu_kill.

 2. CPU_STUCK_IN_KERNEL - CPU couldn't invoke die(), instead is
looping in the kernel. This information could be used by say,
kexec to check if it is really safe to do a kexec reboot.

 3. CPU_PANIC_KERNEL - CPU detected some serious issues which
requires kernel to crash immediately. The secondary CPU cannot
call panic() until it has initialised the GIC. This flag can
be used to instruct the master to do so.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
[catalin.marinas@arm.com: conflict resolution]
[catalin.marinas@arm.com: converted "status" from int to long]
[catalin.marinas@arm.com: updated update_early_cpu_boot_status to use str_l]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch moves cpu_die_early to smp.c, where it fits better.
No functional changes, except for adding the necessary checks
for CONFIG_HOTPLUG_CPU.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Or in other words, make fail_incapable_cpu() reusable.

We use fail_incapable_cpu() to kill a secondary CPU early during the
bringup, which doesn't have the system advertised capabilities.
This patch makes the routine more generic, to kill a secondary
booting CPU, getting rid of the dependency on capability struct.
This can be used by checks which are not necessarily attached to
a capability struct (e.g, cpu ASIDBits).

In that process, renames the function to cpu_die_early() to better
match its functionality. This will be moved to arch/arm64/kernel/smp.c
later.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Adds a routine which can be used to park CPUs (spinning in kernel)
when they can't be killed.

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Since arm64 does not use a decompressor that supplies an execution
environment where it is feasible to some extent to provide a source of
randomness, the arm64 KASLR kernel depends on the bootloader to supply
some random bits in the /chosen/kaslr-seed DT property upon kernel entry.

On UEFI systems, we can use the EFI_RNG_PROTOCOL, if supplied, to obtain
some random bits. At the same time, use it to randomize the offset of the
kernel Image in physical memory.
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Before we can move the command line processing before the allocation
of the kernel, which is required for detecting the 'nokaslr' option
which controls that allocation, move the converted command line higher
up in memory, to prevent it from interfering with the kernel itself.

Since x86 needs the address to fit in 32 bits, use UINT_MAX as the upper
bound there. Otherwise, use ULONG_MAX (i.e., no limit)
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This implements efi_random_alloc(), which allocates a chunk of memory of
a certain size at a certain alignment, and uses the random_seed argument
it receives to randomize the address of the allocation.

This is implemented by iterating over the UEFI memory map, counting the
number of suitable slots (aligned offsets) within each region, and picking
a random number between 0 and 'number of slots - 1' to select the slot,
This should guarantee that each possible offset is chosen equally likely.
Suggested-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This exposes the firmware's implementation of EFI_RNG_PROTOCOL via a new
function efi_get_random_bytes().
Reviewed-by: NMatt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), and entropy has been
provided by the bootloader, randomize the placement of RAM inside the
linear region if sufficient space is available. For instance, on a 4KB
granule/3 levels kernel, the linear region is 256 GB in size, and we can
choose any 1 GB aligned offset that is far enough from the top of the
address space to fit the distance between the start of the lowest memblock
and the top of the highest memblock.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This adds support for KASLR is implemented, based on entropy provided by
the bootloader in the /chosen/kaslr-seed DT property. Depending on the size
of the address space (VA_BITS) and the page size, the entropy in the
virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all
4 levels), with the sidenote that displacements that result in the kernel
image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB
granule kernels, respectively) are not allowed, and will be rounded up to
an acceptable value.

If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is
randomized independently from the core kernel. This makes it less likely
that the location of core kernel data structures can be determined by an
adversary, but causes all function calls from modules into the core kernel
to be resolved via entries in the module PLTs.

If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is
randomized by choosing a page aligned 128 MB region inside the interval
[_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of
entropy (depending on page size), independently of the kernel randomization,
but still guarantees that modules are within the range of relative branch
and jump instructions (with the caveat that, since the module region is
shared with other uses of the vmalloc area, modules may need to be loaded
further away if the module region is exhausted)
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This implements CONFIG_RELOCATABLE, which links the final vmlinux
image with a dynamic relocation section, allowing the early boot code
to perform a relocation to a different virtual address at runtime.

This is a prerequisite for KASLR (CONFIG_RANDOMIZE_BASE).
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Instead of using absolute addresses for both the exception location
and the fixup, use offsets relative to the exception table entry values.
Not only does this cut the size of the exception table in half, it is
also a prerequisite for KASLR, since absolute exception table entries
are subject to dynamic relocation, which is incompatible with the sorting
of the exception table that occurs at build time.

This patch also introduces the _ASM_EXTABLE preprocessor macro (which
exists on x86 as well) and its _asm_extable assembly counterpart, as
shorthands to emit exception table entries.
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This adds support to the generic search_extable() and sort_extable()
implementations for dealing with exception table entries whose fields
contain relative offsets rather than absolute addresses.
Acked-by: NHelge Deller <deller@gmx.de>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Add support to scripts/sortextable for handling relocatable (PIE)
executables, whose ELF type is ET_DYN, not ET_EXEC. Other than adding
support for the new type, no changes are needed.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This reshuffles some code in asm/elf.h and puts a #ifndef __ASSEMBLY__
around its C definitions so that the CPP defines can be used in asm
source files as well.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Before implementing KASLR for arm64 by building a self-relocating PIE
executable, we have to ensure that values we use before the relocation
routine is executed are not subject to dynamic relocation themselves.
This applies not only to virtual addresses, but also to values that are
supplied by the linker at build time and relocated using R_AARCH64_ABS64
relocations.

So instead, use assemble time constants, or force the use of static
relocations by folding the constants into the instructions.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Unfortunately, the current way of using the linker to emit build time
constants into the Image header will no longer work once we switch to
the use of PIE executables. The reason is that such constants are emitted
into the binary using R_AARCH64_ABS64 relocations, which are resolved at
runtime, not at build time, and the places targeted by those relocations
will contain zeroes before that.

So refactor the endian swapping linker script constant generation code so
that it emits the upper and lower 32-bit words separately.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This adds support for emitting PLTs at module load time for relative
branches that are out of range. This is a prerequisite for KASLR, which
may place the kernel and the modules anywhere in the vmalloc area,
making it more likely that branch target offsets exceed the maximum
range of +/- 128 MB.

In this version, I removed the distinction between relocations against
.init executable sections and ordinary executable sections. The reason
is that it is hardly worth the trouble, given that .init.text usually
does not contain that many far branches, and this version now only
reserves PLT entry space for jump and call relocations against undefined
symbols (since symbols defined in the same module can be assumed to be
within +/- 128 MB)

For example, the mac80211.ko module (which is fairly sizable at ~400 KB)
built with -mcmodel=large gives the following relocation counts:

                    relocs    branches   unique     !local
  .text              3925       3347       518        219
  .init.text           11          8         7          1
  .exit.text            4          4         4          1
  .text.unlikely       81         67        36         17

('unique' means branches to unique type/symbol/addend combos, of which
!local is the subset referring to undefined symbols)

IOW, we are only emitting a single PLT entry for the .init sections, and
we are better off just adding it to the core PLT section instead.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Instead of reversing the header dependency between asm/bug.h and
asm/debug-monitors.h, split off the brk instruction immediate value
defines into a new header asm/brk-imm.h, and include it from both.

This solves the circular dependency issue that prevents BUG() from
being used in some header files, and keeps the definitions together.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>