“b82b9183d4f18f9b8c4bb31f223eb6c79b734eb0”上不存在“README.md”
- 20 12月, 2011 1 次提交
-
-
由 Rusty Russell 提交于
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2011 1 次提交
-
-
由 stephen hemminger 提交于
This is compile tested only. Suggested by dumpster diving in PAX. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
We'll either hit one of the case labels or the default in the switch and in all cases do we then 'goto out' and we also have a 'goto out' after the switch that is redundant. Change to just use break in the case statements and leave the 'goto out' after the lop for everyone to hit. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
replace it by ndo_set_rx_mode Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2011 1 次提交
-
-
由 Neil Horman 提交于
After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 7月, 2011 1 次提交
-
-
由 Sergei Shtylyov 提交于
The driver reads PCI subsystem ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2011 1 次提交
-
-
由 Dan Carpenter 提交于
This is error path calls unlock_irq() where we haven't disabled the IRQs. The comment says that this error path can never happen. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2011 8 次提交
-
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Just spelling fixes. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 6月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script (and a little editing): $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Acked-By: NChris Snook <chris.snook@gmail.com> Acked-by: NJon Mason <jdmason@kudzu.us> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2011 1 次提交
-
-
由 Pavel Shved 提交于
The fst_open() function, after a successful try_module_get() may return an error code if hdlc_open() returns it. However, it does not put the module on this error path. This patch adds the necessary module_put() call. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NPavel Shved <shved@ispras.ru> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 07 6月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2011 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit b1c43f82. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41. Milton Miller pointed out the 'unsigned int' issue. Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: NMilton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 5月, 2011 1 次提交
-
-
由 Michal Marek 提交于
The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 10 5月, 2011 1 次提交
-
-
由 Justin P. Mattock 提交于
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 06 5月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8cSigned-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2011 1 次提交
-
-
由 Felipe Balbi 提交于
it makes it simpler to keep track of the amount of bytes received and simplifies how flush_to_ldisc counts the remaining bytes. It also fixes a bug of lost bytes on n_tty when flushing too many bytes via the USB serial gadget driver. Tested-by: NStefan Bigler <stefan.bigler@keymile.com> Tested-by: NToby Gray <toby.gray@realvnc.com> Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 17 3月, 2011 1 次提交
-
-
由 matt mooney 提交于
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: Nmatt mooney <mfm@muteddisk.com> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com> Acked-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 18 2月, 2011 2 次提交
-
-
由 Alan Cox 提交于
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 21 12月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: NJoe Perches <joe@perches.com>
-
- 13 12月, 2010 1 次提交
-
-
由 Krzysztof Halasa 提交于
We must not wake the TX queue without free TX descriptors. sca_xmit() expects at least one free descriptor and BUGs otherwise. Problem reported and fix tested by Bernie Innocenti and Ward Vandewege. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2010 1 次提交
-
-
由 Jiri Slaby 提交于
We should never return positive values from ldisc->open, tty layer doesn't (and never did) expect that. If we do that, weird things like warnings in tty_ldisc_close happen. Not sure if dev->base_addr is used somehow now. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: linux-x25@vger.kernel.org Tested-by: NSergey Lapin <slapin@ossfans.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 11月, 2010 1 次提交
-
-
由 Jiri Slaby 提交于
We register lapb when tty is created, but unregister it only when the device is UP. So move the lapb_unregister to x25_asy_close_tty after the device is down. The old behaviour causes ldisc switching to fail each second attempt, because we noted for us that the device is unused, so we use it the second time, but labp layer still have it registered, so it fails obviously. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Reported-by: NSergey Lapin <slapin@ossfans.org> Cc: Andrew Hendry <andrew.hendry@gmail.com> Tested-by: NSergey Lapin <slapin@ossfans.org> Tested-by: NMikhail Ulyanov <ulyanov.mikhail@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2010 1 次提交
-
-
由 Uwe Kleine-König 提交于
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the kernel Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: NBen Pfaff <blp@cs.stanford.edu> Acked-by: NHans J. Koch <hjk@linutronix.de> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 10月, 2010 1 次提交
-
-
由 Thomas Gleixner 提交于
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: N"David S. Miller" <davem@davemloft.net> LKML-Reference: <20100907125055.557578360@linutronix.de>
-
- 27 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2010 1 次提交
-
-
由 Thomas Weber 提交于
Fix typos with interrest*. Signed-off-by: NThomas Weber <weber@corscience.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 16 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
dev->ip_ptr is protected by rtnl and rcu. Yet some places dont use appropriate primitives and/or locking rules. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 9月, 2010 1 次提交
-
-
由 stephen hemminger 提交于
Change several wan drivers to make strings and other initialize only parameters const. Compile tested only (with no new warnings) Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2010 1 次提交
-
-
由 Joe Perches 提交于
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-