- 13 10月, 2007 1 次提交
-
-
由 Frank A Kingswood 提交于
This patch implements a USB serial port driver for the Winchiphead CH341 USB-RS232 Converter. This chip also implements an IEEE 1284 parallel port, I2C and SPI, but that is not supported by the driver. Signed-off-by: NFrank A Kingswood <frank@kingswood-consulting.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 7月, 2007 1 次提交
-
-
由 Kees Lemmens 提交于
Last week I've been searching for a driver for the CA-42 cable (see usb below) that fitted my kernel 2.6.20. I only found an abandoned version for a driver on your website that indeed worked on 2.6.18 but wouldn't even compile with a more recent 2.6.20 kernel. I fiddled 2 evenings with the kernel code and have patched it up now to work with the modifications in the 2.6.20 kernel. The patch is attached hereafter and it works fine (at least for me :-) ). Bus 2 Device 13: ID 0ea0:6858 Ours Technology, Inc. I had to fiddle a little with the settings in .gnokiirc but that also occurred with the older 2.6.18 kernel. Nevertheless, on one system with this cable and my Nokia 6070 I had best results with : model = 6510 connection = dku5 while on an other system with the same kernel, cable and phone it only worked with : model = AT connection = serial serial_write_usleep = 1 From: Kees Lemmens <C.W.J.Lemmens@ewi.tudelft.nl> Cc: <pawel.kot@gmail.com> Cc: <bozo@andrews.hu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 02 12月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
It's a simple usb-serial driver that just creates a tty device to read and write from. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 10月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Add support for Moschip 7720 USB dual port usb to serial device. This driver is originally based on the drivers/usb/io_edgeport.c driver. Cleaned up and forward ported by me. Cc: VijayaKumar <vijaykumar@aspirecom.net> Cc: AjayKumar <ajay@aspirecom.net> Cc: Gurudeva <gurudev@aspirecom.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 9月, 2006 2 次提交
-
-
由 Paul B Schroeder 提交于
Signed-off-by: NPaul B Schroeder <pschroeder@uplogix.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Manuel Francisco Naranjo 提交于
Add driver for AIRcable USB Bluetooth dongle. Signed-off-by: NNaranjo, Manuel Francisco <naranjo.manuel@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 8月, 2006 1 次提交
-
-
由 Matthias Urlichs 提交于
Signed-off-by: NJon K Hellan <hellan@acm.org> Signed-Off-By: NMatthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 7月, 2006 1 次提交
-
-
由 Kevin Lloyd 提交于
This patch creates a new driver, sierra.c, that supports the new non-composite Sierra Wireless WWAN devices. The older Sierra Wireless and Airprime devices are supported in airprime.c. Signed-off-by: NKevin Lloyd <linux@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 5月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Based on Simon's original driver, with some minor code cleanups and tidying by me. Cc: Simon Schulz <simon@auctionant.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 4月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Cc: David Clare <david@funsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 21 3月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Thanks to Warren Lewis <wlewis@scn.org> for the information needed to write the driver and for testing it out. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 11月, 2005 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Kroah-Hartman 提交于
It was causing too many problems, and this is not the proper type of driver for this device. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This driver comes from the gnokii project. Was further cleaned up by me to match recent usb-serial core changes. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 6月, 2005 1 次提交
-
-
由 Matthias Urlichs 提交于
This patch adds a new driver for "Option" cards. This is a GSM data card, controlled by three "serial ports" which are connected via an OHCI adapter, all located on an oversized PC-Card. It's sold by several GSM service providers. Traditionally, this card has been accessed via the standard serial driver and appropriate vendor= and product= options. However, testing has revealed several problems with this approach, including hung data transfers and lost data blocks when receiving. Therefore, I've written a separate driver. Signed-off-by: NMatthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 5月, 2005 1 次提交
-
-
由 Greg KH 提交于
Easier than trying to use the generic usb-serial driver. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 4月, 2005 1 次提交
-
-
由 Arthur Huillet 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-