usbtest did not swap the received status information when checking for
a non-zero value and failed to discover halted endpoints on big endian
systems.

Cc: stable <stable@kernel.org>
Signed-off-by: NJan Andersson <jan@gaisler.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add "FIX_CAPACITY" entry for HP Photosmart r707 Camera in "Disk" mode.
Camera will wedge when /lib/udev/vol_id attempts to access the last sector,
EIO gets reported to dmesg, and block device is marked "offline" (it is).
Reproduced vol_id behavior with:
	"dd if=/dev/sda of=/dev/null skip=60800 count=1"

Cc: stable <stable@kernel.org>
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've got a Dell wireless 5520 card with a different USB ID - specifically, 8136
instead of 8137. Attached a small patch to add support, and the output of an
'ati3'.

If we could get this in, that'd be sweet.  ;)  Thanks!

nc@knight:~/tmp/linux-2.6.24-rc8/drivers/usb/serial$ lsusb | grep 8136
	Bus 001 Device 005: ID 413c:8136 Dell Computer Corp.
nc@knight:~/tmp/linux-source-2.6.23/drivers/usb/serial$ cu -l ttyUSB0 -s 115200
	Connected.
	ati3
	Manufacturer: Novatel Wireless Incorporated
	Model: Expedite EU860D MiniCard
	Revision: 10.10.04.01-01  [2007-04-11 14:07:19]
	IMEI: 011186000228043
	+GCAP: +CGSM,+DS,+ES

From: Nate Carlson <natecars@natecarlson.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this function will run in the context of the scsi error handler thread.
It must use GFP_NOIO instead of GFP_KERNEL to avoid a possible
deadlock.

Cc: stable <stable@kernel.org>
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added support for the Elster Unicom III Optical Probe.
The device ID has already been added to the usb.ids file.

Cc: stable <stable@kernel.org>
Signed-off-by: NEd Beroset <beroset@mindspring.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pl2303: add support for RATOC REX-USB60F

This patch adds support for RATOC REX-USB60F Serial Adapters,
which is widely used in Japan recently.

Cc: stable <stable@kernel.org>
Signed-off-by: NAkira Tsukamoto <akirat@rd.scei.sony.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove entry for Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) in pl2303 driver
Option driver is use instead

Cc: stable <stable@kernel.org>
Signed-off-by: NDaniel Kozák <kozzi11@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added support for Onda H600/Zte MF330 GPRS/UMTS/HSDPA datacard

Cc: stable <stable@kernel.org>
Signed-off-by: NBruno Redondi <bruno.redondi@altarisoluzione.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

little patches only to add vendor/device id of ATK_16IC CCD cam for
astronomy.

From: Franco Lanza <nextime@nexlab.it>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I work with a group of people on a free home automation tool called
FHEM.  Some of the users own more than one USB-serial device by ELV. The
ftdi_sio driver has most of the ELV devices disabled by default and
needs to be re-enabled every time you get a new kernel. Additionally a
new device (EM 1010 PC - enegry monitor) is missing in the list.
Currently our users have to follow the instructions we provide at
http://www.koeniglich.de/fhem/linux.html ... However, to some users it
is too complicated to compile their own kernel module.

We are aware that you can specify one additional device using the
vendor/product option of the module. But lot's of users own more than
one device.

Cc: stable <stable@kernel.org>
Signed-off-by: NPeter Stark <peter.stark@t-online.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch corrects the wrong function name mentioned in the comments
of usb_unregister_notify function.
Signed-off-by: NManish Katiyar <mkatiyar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following improvements were made:
 - Added new product support: MC5725, AC 880 U, MP 3G (UMTS & CDMA)

Cc: stable <stable@kernel.org>
Signed-off-by: NKevin Lloyd <linux@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This simply adds the "YC Cable" as a vendor and its pl2303-based
USB<->Serial adapter as a product.  This particular adapter is sold by
Radio Shack.  I've done limited testing on a few different systems with
no issues.

Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adds the appropriate vendor and device IDs for the AirCard 881U to
sierra.c. (This device is often rebadged by AT&T as the USBConnect 881).

Cc: stable <stable@kernel.org>
Signed-off-by: NJessica L Blank <j@twu.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

add support for:

  4348:5523 WinChipHead USB->RS 232 adapter with Prolifec PL 2303 chipset

[ mingo@elte.hu: merged it and nursed it upstream ]

Cc: stable <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Six new device IDs for CP2101 driver.

Cc: stable <stable@kernel.org>
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For fsl_usb2_udc driver, ep0 also has a descriptor.  Current code is
misleading and contains a logical mistake.  Here is the patch to fix it.

 http://bugzilla.kernel.org/show_bug.cgi?id=9595

Cc: stable <stable@kernel.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we get a data URB back from the hardware after we have put the tty to
bed we go kaboom. Fortunately all we need to do is process the URB
without trying to ram its contents down the throat of an ex-tty.

Cc: stable <stable@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use container_of() instead of assuming local uart struct is first member
of uart_port struct.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use IRQF_DISABLED instead of obsolete IRQ_FLG_STD for request_irq() flags
in m68328serial.c driver.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add configure support for new ColdFire serial driver.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add build support for new ColdFire serial driver.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MSSR constants didn't match the reality - bitfield declarations used
to be correct (1000BT_FD - bit 11, 1000BT_HD - bit 10), but enum had
them the other way round.  Went unnoticed until the switch from the
bitfields use to the explicit arithmetics and I hadn't caught that one
when verifying correctness of change...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's perfectly legal to have data leftovers when a drive signals
completion, it happens all the time when a user issues a command
with a transfer count that is too large.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch removes the no longer used EXPORT_SYMBOL(add_disk_randomness).
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch fixes the following section mismatches:

<--  snip  -->

...
WARNING: drivers/block/sunvdc.o(.text+0xf0): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
WARNING: drivers/block/sunvdc.o(.text+0xf8): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
...

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We were checking for the ASYM_PAUSE bit for 1000Base-X twice instead
checking for both the 1000Base-X bit and the 10/100/1000Base-T bit.
The purpose of the logic is to tell the firmware that ASYM_PAUSE is
set on either the Serdes or Copper interface.

Problem was discovered by Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In drivers/net/macvlan.c, when rtnl_link_register() fails in
macvlan_init_module(), there is no point to set it (second time in
this method) to macvlan_handle_frame; macvlan_init_module() will
return a negative number, so instead this patch sets
macvlan_handle_frame_hook to NULL.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update firmware to support programmable flow control.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make use of the programmable high/low water marks in 5709 for
802.3 flow control.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The CTX_WR macro is unnecessary and obfuscates the code.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code.  Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the tx coalescing setup code independent of the MSIX vector.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New driver for wireless RNDIS devices. So far only known chip that uses
wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that
have RNDIS wireless physical medium. At least following devices are
detected:

  Buffalo WLI-U2-KG125S
  U.S. Robotics USR5421
  Belkin F5D7051
  Linksys WUSB54GSv2
  Linksys WUSB54GSC
  Asus WL169gE
  Eminent EM4045
  BT Voyager 1055
  Linksys WUSB54GSv1
  U.S. Robotics USR5420
  BUFFALO WLI-USB-G54
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes
for drivers/net/usb modules. Headers are moved because rndis_wlan will be
outside drivers/net/usb in drivers/net/wireless and yet need these headers.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add RNDIS physical medium checking into generic_rndis_bind() and also make
rndis_host to be only bind on every medium except wireless.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Callback to signal link state changes from minidriver to
'subminidrivers'.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function pointer is for 'subminidrivers' that need to do work on device
right after minidriver has initialized hardware.

For example, rndis_wlan setting device specific configuration parameters
with OID_GEN_RNDIS_CONFIG_PARAMETER right after rndis_host has
initialized hardware with RNDIS_INIT.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>