Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Rename ->ide_dma_clear_irq method to ->clear_irq
  and move it from ide_hwif_t to struct ide_port_ops.

* Move ->waiting_for_dma check inside ->clear_irq method.

* Move ->dma_base check inside ->clear_irq method.

piix.c:
* Add ich_port_ops and remove init_hwif_ich() wrapper.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Noticed-by: NRussell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'struct task_s' to ide_hwif_t and init it to the current command
  in do_rw_taskfile().

* Merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out reset error reporting from reset_pollfunc()
to ide_reset_report_error() helper.

While at it:
- fix KERN_* printk() levels
- remove 'switch ()'
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Convert 'pio_mode' device setting to use DS_SYNC flag.

* Remove unused special_t.b.{set_tune,serviced} and ide_drive_t.tune_req.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use 'drive->dn & 1' in ide_init_disk().

* remove [ata_]select_t.

While at it:

* Use ATA_DEVICE_OBS define in ide_port_init_devices_data().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Call ide_port_init_devices() in ide_host_register()
  also if 'struct ide_port_info *d' is not available.

* Init drive->dn in ide_port_init_devices() instead of
  ide_probe_port() so it is valid also in ->init_dev.

* Pass device number to ide_dev_apply_params().

* Use 'drive->dn & 1' instead of drive->select.b.unit.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Having CY82C693_DEBUG_INFO is enough nowadays.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove dead CY82C693_SETDMA_CLOCK code and now not needed
init_chipset_cy82c693().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ide*_pm_* enums from ide-io.c to <linux/ide.h>.

* idedisk_pm_* -> ide_pm_*

* ide_pm_state_* -> ide_pm_*

* No need to set ide_pm_* enums to the fixed values.

* Uppercase ide_pm_* enums.

* Fix/update comments.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add IDE_DFLAG_LBA device flag and use it instead of ->select.b.lba.

Since ->tf_load uses ->select.all for ATA Device/Head register this
fixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add IDE_DFLAG_DMA_PIO_RETRY and use it instead of
ide_drive_t.state + DMA_PIO_RETRY.

There should be no functional changes cause by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields
to IDE_DFLAG_* flags.

While at it:
- IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48
- fixup some comments
- remove needless g->flags zeroing from ide*_probe()

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_do_setfeature() helper and convert set_{wcache,acoustic}()
to use it.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Return -EIO if arg > 0 and LBA48 is unsupported.

* No need to reset ->addressing.

* Make ->addressing a single bit flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ACPI _GTM / _PS0 / _STM were not called if only slave device was present.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... with which to control to verbosity of debug messages on module load time.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
[bart: no need to zero debug_mask + move module_param() closer debug_mask]
[bart: init drive->debug_mask in ide_floppy_probe() not in idefloppy_open()]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Also:

- leave in the possibility for optimizing away all debugging macros
- add a PFX macro and prepend all printk calls with it for consistency
- change idefloppy_create_rw_cmd's 1st arg from idefloppy_floppy_t * to
ide_drive_t *.
- add a missing printk-level in idefloppy_init
- fix minor checkpatch warnings
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add __ide_debug_log() debugging macro which is controlled by drive->debug_mask.
The macro has to have the macro DRV_NAME defined in each driver before use.
Also, add different debugging levels depending on the functionality debugged.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add a debugging on/off switch for controlling driver debugging
messages dynamically.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Introduce to_ide_drv() and ide_drv_g() macros and replace the respective
definitions of similar ones in each driver.

There should be no functionality change resulting from this patch.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

I don't know why this was there, but it was dead code.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: chris@zankel.net
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

MAX_HWIFS is now always equal to the number of IDE major numbers.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Because hd.c was moved to drivers/block/ this config option
is superfluous now and may be removed.

v2:
Fix drivers/ide/Makefile (noticed by Adrian Bunk).

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ->ticks field from struct ide_floppy_obj to ide_drive_t.

* Move idefloppy_transfer_pc() to ide-atapi.c and make
  ide_transfer_pc() use it.

* Always use ide_transfer_pc as a handler in ide_issue_pc().

* Remove no longer used idefloppy_start_pc_transfer(),
  ide*_transfer_pc() and 'handler' argument from ide_issue_pc().

* Make ide_transfer_pc() static.

While at it:

* idefloppy_transfer_pc() -> ide_delayed_transfer_pc()

* IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY

* ->ticks -> ->pc_delay

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Always use ide_pc_intr as a handler in ide_pc_intr().

* Remove no longer used ide*_pc_intr() and 'handler'
  argument from ide_{transfer_pc,pc_intr}().

* Make ide_pc_intr() static.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ->pc_{update,io}_buffers methods to ide_drive_t and use
them instead of {update,io}_buffers ide_pc_intr() arguments.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers
  and convert ide-{atapi,floppy,tape}.c to use them.

* Remove no longer used ide*_create_request_sense_cmd(),
  ide*_retry_pc() and 'retry_pc' argument from ide_pc_intr().

* Make ide_queue_pc_head() static.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to
ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move idescsi_expiry() to ide-atapi.c.

* Move get_timeout() to <linux/ide.h>.

* Drop 'timeout' and 'expiry' arguments from ide_pc_intr().

While at it:

* idescsi_expiry() -> ide_scsi_expiry()

* get_timeout() -> ide_scsi_get_timeout()

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add pointer to the current packet command (struct ide_atapi_pc *pc)
  to ide_drive_t and use it instead of the pointer in struct ide_*_obj.

* Use drive->pc in ide_{issue,transfer}_pc() and ide_pc_intr()
  instead of 'pc' argument.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'int dsc' argument to ->pc_callback method.

* Call ide_tape_handle_dsc() internally in ide_tape_callback()
  if dsc argument is set and update ide_pc_intr() accordingly.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix several issues with the log messages printed by ide_dma_sgiioc4() and
sgiioc4_ide_setup_pci_device():

- IOC4 registers are memory-mapped but the "BM-DMA at" format corresponds to
  I/O  mapped registers;

- "%p" format specifiers and type casts used to print non-pointer values;

- using KERN_INFO log level for the error message;

- 'hwif->name' printed as drive's name.

While at it, also:

- return more fitting -EBUSY if request_mem_region() fails;

- make the error message style consistent;

- fix indentation, put the printk() facility and message on the same line;

- use comparisions with NULL instead of ! operator..
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix the drive non-busy criterion used by sgiioc4_read_status(): neither of the
bits it expects to be set guarantees that the drive is not busy (and might be
interrupting), only the BSY bit itself being zero gurantees that.
While at it, use ATA_BUSY instead of hardcoded value everywhere...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...