Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 3月, 2010 1 次提交
  3. 07 3月, 2010 3 次提交
  5. 18 2月, 2010 1 次提交
  7. 12 1月, 2010 1 次提交
    • K
      proc: partially revert "procfs: provide stack information for threads" · 1306d603
      由 KOSAKI Motohiro 提交于 
      Commit d899bf7b (procfs: provide stack information for threads) introduced
to show stack information in /proc/{pid}/status.  But it cause large
performance regression.  Unfortunately /proc/{pid}/status is used ps
command too and ps is one of most important component.  Because both to
take mmap_sem and page table walk are heavily operation.

If many process run, the ps performance is,

[before d899bf7b]

% perf stat ps >/dev/null

 Performance counter stats for 'ps':

     4090.435806  task-clock-msecs         #      0.032 CPUs
             229  context-switches         #      0.000 M/sec
               0  CPU-migrations           #      0.000 M/sec
             234  page-faults              #      0.000 M/sec
      8587565207  cycles                   #   2099.425 M/sec
      9866662403  instructions             #      1.149 IPC
      3789415411  cache-references         #    926.409 M/sec
        30419509  cache-misses             #      7.437 M/sec

   128.859521955  seconds time elapsed

[after d899bf7b]

% perf stat  ps  > /dev/null

 Performance counter stats for 'ps':

     4305.081146  task-clock-msecs         #      0.028 CPUs
             480  context-switches         #      0.000 M/sec
               2  CPU-migrations           #      0.000 M/sec
             237  page-faults              #      0.000 M/sec
      9021211334  cycles                   #   2095.480 M/sec
     10605887536  instructions             #      1.176 IPC
      3612650999  cache-references         #    839.160 M/sec
        23917502  cache-misses             #      5.556 M/sec

   152.277819582  seconds time elapsed

Thus, this patch revert it. Fortunately /proc/{pid}/task/{tid}/smaps
provide almost same information. we can use it.

Commit d899bf7b introduced two features:

 1) Add the annotattion of [thread stack: xxxx] mark to
    /proc/{pid}/task/{tid}/maps.
 2) Add StackUsage field to /proc/{pid}/status.

I only revert (2), because I haven't seen (1) cause regression.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1306d603
  9. 16 12月, 2009 1 次提交
    • J
      procfs: allow threads to rename siblings via /proc/pid/tasks/tid/comm · 4614a696
      由 john stultz 提交于 
      Setting a thread's comm to be something unique is a very useful ability
and is helpful for debugging complicated threaded applications.  However
currently the only way to set a thread name is for the thread to name
itself via the PR_SET_NAME prctl.

However, there may be situations where it would be advantageous for a
thread dispatcher to be naming the threads its managing, rather then
having the threads self-describe themselves.  This sort of behavior is
available on other systems via the pthread_setname_np() interface.

This patch exports a task's comm via proc/pid/comm and
proc/pid/task/tid/comm interfaces, and allows thread siblings to write to
these values.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Mike Fulton <fultonm@ca.ibm.com>
Cc: Sean Foley <Sean_Foley@ca.ibm.com>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4614a696
  11. 10 12月, 2009 1 次提交
  13. 26 10月, 2009 1 次提交
  15. 30 9月, 2009 1 次提交
    • T
      ext4: Use tracepoints for mb_history trace file · 296c355c
      由 Theodore Ts'o 提交于 
      The /proc/fs/ext4/<dev>/mb_history was maintained manually, and had a
number of problems: it required a largish amount of memory to be
allocated for each ext4 filesystem, and the s_mb_history_lock
introduced a CPU contention problem.  

By ripping out the mb_history code and replacing it with ftrace
tracepoints, and we get more functionality: timestamps, event
filtering, the ability to correlate mballoc history with other ext4
tracepoints, etc.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
      296c355c
  17. 23 9月, 2009 1 次提交
    • S
      procfs: provide stack information for threads · d899bf7b
      由 Stefani Seibold 提交于 
      A patch to give a better overview of the userland application stack usage,
especially for embedded linux.

Currently you are only able to dump the main process/thread stack usage
which is showed in /proc/pid/status by the "VmStk" Value.  But you get no
information about the consumed stack memory of the the threads.

There is an enhancement in the /proc/<pid>/{task/*,}/*maps and which marks
the vm mapping where the thread stack pointer reside with "[thread stack
xxxxxxxx]".  xxxxxxxx is the maximum size of stack.  This is a value
information, because libpthread doesn't set the start of the stack to the
top of the mapped area, depending of the pthread usage.

A sample output of /proc/<pid>/task/<tid>/maps looks like:

08048000-08049000 r-xp 00000000 03:00 8312       /opt/z
08049000-0804a000 rw-p 00001000 03:00 8312       /opt/z
0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
a7d12000-a7d13000 ---p 00000000 00:00 0
a7d13000-a7f13000 rw-p 00000000 00:00 0          [thread stack: 001ff4b4]
a7f13000-a7f14000 ---p 00000000 00:00 0
a7f14000-a7f36000 rw-p 00000000 00:00 0
a7f36000-a8069000 r-xp 00000000 03:00 4222       /lib/libc.so.6
a8069000-a806b000 r--p 00133000 03:00 4222       /lib/libc.so.6
a806b000-a806c000 rw-p 00135000 03:00 4222       /lib/libc.so.6
a806c000-a806f000 rw-p 00000000 00:00 0
a806f000-a8083000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
a8083000-a8084000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
a8084000-a8085000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
a8085000-a8088000 rw-p 00000000 00:00 0
a8088000-a80a4000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
a80a4000-a80a5000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
a80a5000-a80a6000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
afaf5000-afb0a000 rw-p 00000000 00:00 0          [stack]
ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]

Also there is a new entry "stack usage" in /proc/<pid>/{task/*,}/status
which will you give the current stack usage in kb.

A sample output of /proc/self/status looks like:

Name:	cat
State:	R (running)
Tgid:	507
Pid:	507
.
.
.
CapBnd:	fffffffffffffeff
voluntary_ctxt_switches:	0
nonvoluntary_ctxt_switches:	0
Stack usage:	12 kB

I also fixed stack base address in /proc/<pid>/{task/*,}/stat to the base
address of the associated thread stack and not the one of the main
process.  This makes more sense.

[akpm@linux-foundation.org: fs/proc/array.c now needs walk_page_range()]
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d899bf7b
  19. 22 9月, 2009 3 次提交
  21. 19 8月, 2009 1 次提交
    • K
      mm: revert "oom: move oom_adj value" · 0753ba01
      由 KOSAKI Motohiro 提交于 
      The commit 2ff05b2b (oom: move oom_adj value) moveed the oom_adj value to
the mm_struct.  It was a very good first step for sanitize OOM.

However Paul Menage reported the commit makes regression to his job
scheduler.  Current OOM logic can kill OOM_DISABLED process.

Why? His program has the code of similar to the following.

	...
	set_oom_adj(OOM_DISABLE); /* The job scheduler never killed by oom */
	...
	if (vfork() == 0) {
		set_oom_adj(0); /* Invoked child can be killed */
		execve("foo-bar-cmd");
	}
	....

vfork() parent and child are shared the same mm_struct.  then above
set_oom_adj(0) doesn't only change oom_adj for vfork() child, it's also
change oom_adj for vfork() parent.  Then, vfork() parent (job scheduler)
lost OOM immune and it was killed.

Actually, fork-setting-exec idiom is very frequently used in userland program.
We must not break this assumption.

Then, this patch revert commit 2ff05b2b and related commit.

Reverted commit list
---------------------
- commit 2ff05b2b (oom: move oom_adj value from task_struct to mm_struct)
- commit 4d8b9135 (oom: avoid unnecessary mm locking and scanning for OOM_DISABLE)
- commit 81236810 (oom: only oom kill exiting tasks with attached memory)
- commit 933b787b (mm: copy over oom_adj value at fork time)
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0753ba01
  23. 19 6月, 2009 2 次提交
  25. 17 6月, 2009 1 次提交
    • D
      oom: move oom_adj value from task_struct to mm_struct · 2ff05b2b
      由 David Rientjes 提交于 
      The per-task oom_adj value is a characteristic of its mm more than the
task itself since it's not possible to oom kill any thread that shares the
mm.  If a task were to be killed while attached to an mm that could not be
freed because another thread were set to OOM_DISABLE, it would have
needlessly been terminated since there is no potential for future memory
freeing.

This patch moves oomkilladj (now more appropriately named oom_adj) from
struct task_struct to struct mm_struct.  This requires task_lock() on a
task to check its oom_adj value to protect against exec, but it's already
necessary to take the lock when dereferencing the mm to find the total VM
size for the badness heuristic.

This fixes a livelock if the oom killer chooses a task and another thread
sharing the same memory has an oom_adj value of OOM_DISABLE.  This occurs
because oom_kill_task() repeatedly returns 1 and refuses to kill the
chosen task while select_bad_process() will repeatedly choose the same
task during the next retry.

Taking task_lock() in select_bad_process() to check for OOM_DISABLE and in
oom_kill_task() to check for threads sharing the same memory will be
removed in the next patch in this series where it will no longer be
necessary.

Writing to /proc/pid/oom_adj for a kthread will now return -EINVAL since
these threads are immune from oom killing already.  They simply report an
oom_adj value of OOM_DISABLE.

Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2ff05b2b
  27. 13 6月, 2009 1 次提交
  29. 03 4月, 2009 1 次提交
    • S
      documentation: update Documentation/filesystem/proc.txt and Documentation/sysctls · 760df93e
      由 Shen Feng 提交于 
      Now /proc/sys is described in many places and much information is
redundant.  This patch updates the proc.txt and move the /proc/sys
desciption out to the files in Documentation/sysctls.

Details are:

merge
-  2.1  /proc/sys/fs - File system data
-  2.11 /proc/sys/fs/mqueue - POSIX message queues filesystem
-  2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
with Documentation/sysctls/fs.txt.

remove
-  2.2  /proc/sys/fs/binfmt_misc - Miscellaneous binary formats
since it's not better then the Documentation/binfmt_misc.txt.

merge
-  2.3  /proc/sys/kernel - general kernel parameters
with Documentation/sysctls/kernel.txt

remove
-  2.5  /proc/sys/dev - Device specific parameters
since it's obsolete the sysfs is used now.

remove
-  2.6  /proc/sys/sunrpc - Remote procedure calls
since it's not better then the Documentation/sysctls/sunrpc.txt

move
-  2.7  /proc/sys/net - Networking stuff
-  2.9  Appletalk
-  2.10 IPX
to newly created Documentation/sysctls/net.txt.

remove
-  2.8  /proc/sys/net/ipv4 - IPV4 settings
since it's not better then the Documentation/networking/ip-sysctl.txt.

add
- Chapter 3 Per-Process Parameters
to descibe /proc/<pid>/xxx parameters.
Signed-off-by: NShen Feng <shen@cn.fujitsu.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      760df93e
  31. 19 3月, 2009 1 次提交
  33. 31 3月, 2009 1 次提交
  35. 30 1月, 2009 1 次提交
  37. 16 1月, 2009 1 次提交
  39. 07 1月, 2009 1 次提交
    • D
      mm: add dirty_background_bytes and dirty_bytes sysctls · 2da02997
      由 David Rientjes 提交于 
      This change introduces two new sysctls to /proc/sys/vm:
dirty_background_bytes and dirty_bytes.

dirty_background_bytes is the counterpart to dirty_background_ratio and
dirty_bytes is the counterpart to dirty_ratio.

With growing memory capacities of individual machines, it's no longer
sufficient to specify dirty thresholds as a percentage of the amount of
dirtyable memory over the entire system.

dirty_background_bytes and dirty_bytes specify quantities of memory, in
bytes, that represent the dirty limits for the entire system.  If either
of these values is set, its value represents the amount of dirty memory
that is needed to commence either background or direct writeback.

When a `bytes' or `ratio' file is written, its counterpart becomes a
function of the written value.  For example, if dirty_bytes is written to
be 8096, 8K of memory is required to commence direct writeback.
dirty_ratio is then functionally equivalent to 8K / the amount of
dirtyable memory:

	dirtyable_memory = free pages + mapped pages + file cache

	dirty_background_bytes = dirty_background_ratio * dirtyable_memory
		-or-
	dirty_background_ratio = dirty_background_bytes / dirtyable_memory

		AND

	dirty_bytes = dirty_ratio * dirtyable_memory
		-or-
	dirty_ratio = dirty_bytes / dirtyable_memory

Only one of dirty_background_bytes and dirty_background_ratio may be
specified at a time, and only one of dirty_bytes and dirty_ratio may be
specified.  When one sysctl is written, the other appears as 0 when read.

The `bytes' files operate on a page size granularity since dirty limits
are compared with ZVC values, which are in page units.

Prior to this change, the minimum dirty_ratio was 5 as implemented by
get_dirty_limits() although /proc/sys/vm/dirty_ratio would show any user
written value between 0 and 100.  This restriction is maintained, but
dirty_bytes has a lower limit of only one page.

Also prior to this change, the dirty_background_ratio could not equal or
exceed dirty_ratio.  This restriction is maintained in addition to
restricting dirty_background_bytes.  If either background threshold equals
or exceeds that of the dirty threshold, it is implicitly set to half the
dirty threshold.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2da02997
  41. 05 1月, 2009 1 次提交
    • K
      proc: add /proc/*/stack · 2ec220e2
      由 Ken Chen 提交于 
      /proc/*/stack adds the ability to query a task's stack trace. It is more
useful than /proc/*/wchan as it provides full stack trace instead of single
depth. Example output:

	$ cat /proc/self/stack
	[<c010a271>] save_stack_trace_tsk+0x17/0x35
	[<c01827b4>] proc_pid_stack+0x4a/0x76
	[<c018312d>] proc_single_show+0x4a/0x5e
	[<c016bdec>] seq_read+0xf3/0x29f
	[<c015a004>] vfs_read+0x6d/0x91
	[<c015a0c1>] sys_read+0x3b/0x60
	[<c0102eda>] syscall_call+0x7/0xb
	[<ffffffff>] 0xffffffff

[add save_stack_trace_tsk() on mips, ACK Ralf --adobriyan]
Signed-off-by: NKen Chen <kenchen@google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
      2ec220e2
  43. 02 12月, 2008 1 次提交
    • D
      epoll: introduce resource usage limits · 7ef9964e
      由 Davide Libenzi 提交于 
      It has been thought that the per-user file descriptors limit would also
limit the resources that a normal user can request via the epoll
interface.  Vegard Nossum reported a very simple program (a modified
version attached) that can make a normal user to request a pretty large
amount of kernel memory, well within the its maximum number of fds.  To
solve such problem, default limits are now imposed, and /proc based
configuration has been introduced.  A new directory has been created,
named /proc/sys/fs/epoll/ and inside there, there are two configuration
points:

  max_user_instances = Maximum number of devices - per user

  max_user_watches   = Maximum number of "watched" fds - per user

The current default for "max_user_watches" limits the memory used by epoll
to store "watches", to 1/32 of the amount of the low RAM.  As example, a
256MB 32bit machine, will have "max_user_watches" set to roughly 90000.
That should be enough to not break existing heavy epoll users.  The
default value for "max_user_instances" is set to 128, that should be
enough too.

This also changes the userspace, because a new error code can now come out
from EPOLL_CTL_ADD (-ENOSPC).  The EMFILE from epoll_create() was already
listed, so that should be ok.

[akpm@linux-foundation.org: use get_current_user()]
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <stable@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: NVegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7ef9964e
  45. 31 10月, 2008 1 次提交
  47. 20 10月, 2008 2 次提交
    • A
      documentation: clarify dirty_ratio and dirty_background_ratio description · 7a6560e0
      由 Andrea Righi 提交于 
      The current documentation of dirty_ratio and dirty_background_ratio is a
bit misleading.

In the documentation we say that they are "a percentage of total system
memory", but the current page writeback policy, intead, is to apply the
percentages to the dirtyable memory, that means free pages + reclaimable
pages.

Better to be more explicit to clarify this concept.
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7a6560e0
    • K
      coredump_filter: add hugepage dumping · e575f111
      由 KOSAKI Motohiro 提交于 
      Presently hugepage's vma has a VM_RESERVED flag in order not to be
swapped.  But a VM_RESERVED vma isn't core dumped because this flag is
often used for some kernel vmas (e.g.  vmalloc, sound related).

Thus hugepages are never dumped and it can't be debugged easily.  Many
developers want hugepages to be included into core-dump.

However, We can't read generic VM_RESERVED area because this area is often
IO mapping area.  then these area reading may change device state.  it is
definitly undesiable side-effect.

So adding a hugepage specific bit to the coredump filter is better.  It
will be able to hugepage core dumping and doesn't cause any side-effect to
any i/o devices.

In additional, libhugetlb use hugetlb private mapping pages as anonymous
page.  Then, hugepage private mapping pages should be core dumped by
default.

Then, /proc/[pid]/core_dump_filter has two new bits.

 - bit 5 mean hugetlb private mapping pages are dumped or not. (default: yes)
 - bit 6 mean hugetlb shared mapping pages are dumped or not.  (default: no)

I tested by following method.

% ulimit -c unlimited
% ./crash_hugepage  50
% ./crash_hugepage  50  -p
% ls -lh
% gdb ./crash_hugepage core
%
% echo 0x43 > /proc/self/coredump_filter
% ./crash_hugepage  50
% ./crash_hugepage  50  -p
% ls -lh
% gdb ./crash_hugepage core

#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <string.h>

#include "hugetlbfs.h"

int main(int argc, char** argv){
	char* p;
	int ch;
	int mmap_flags = MAP_SHARED;
	int fd;
	int nr_pages;

	while((ch = getopt(argc, argv, "p")) != -1) {
		switch (ch) {
		case 'p':
			mmap_flags &= ~MAP_SHARED;
			mmap_flags |= MAP_PRIVATE;
			break;
		default:
			/* nothing*/
			break;
		}
	}
	argc -= optind;
	argv += optind;

	if (argc == 0){
		printf("need # of pages\n");
		exit(1);
	}

	nr_pages = atoi(argv[0]);
	if (nr_pages < 2) {
		printf("nr_pages must >2\n");
		exit(1);
	}

	fd = hugetlbfs_unlinked_fd();
	p = mmap(NULL, nr_pages * gethugepagesize(),
		 PROT_READ|PROT_WRITE, mmap_flags, fd, 0);

	sleep(2);

	*(p + gethugepagesize()) = 1; /* COW */
	sleep(2);

	/* crash! */
	*(int*)0 = 1;

	return 0;
}
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKawai Hidehiro <hidehiro.kawai.ez@hitachi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: William Irwin <wli@holomorphy.com>
Cc: Adam Litke <agl@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e575f111
  49. 17 10月, 2008 2 次提交
  51. 10 10月, 2008 3 次提交
  53. 14 9月, 2008 1 次提交
  55. 03 9月, 2008 1 次提交
  57. 27 7月, 2008 1 次提交
  59. 25 7月, 2008 1 次提交
    • E
      vmallocinfo: add NUMA information · a47a126a
      由 Eric Dumazet 提交于 
      Christoph recently added /proc/vmallocinfo file to get information about
vmalloc allocations.

This patch adds NUMA specific information, giving number of pages
allocated on each memory node.

This should help to check that vmalloc() is able to respect NUMA policies.

Example of output on a four nodes machine (one cpu per node)

1) network hash tables are evenly spreaded on four nodes (OK) (Same
   point for inodes and dentries hash tables)

2) iptables tables (x_tables) are correctly allocated on each cpu node
   (OK).

3) sys_swapon() allocates its memory from one node only.

4) each loaded module is using memory on one node.

Sysadmins could tune their setup to change points 3) and 4) if necessary.

grep "pages="  /proc/vmallocinfo
0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc2000031a000-0xffffc2000031d000   12288 alloc_large_system_hash+0x204/0x2c0 pages=2 vmalloc N1=1 N2=1
0xffffc2000031f000-0xffffc2000032b000   49152 cramfs_uncompress_init+0x2e/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
0xffffc2000033e000-0xffffc20000341000   12288 sys_swapon+0x640/0xac0 pages=2 vmalloc N0=2
0xffffc20000341000-0xffffc20000344000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N0=2
0xffffc20000344000-0xffffc20000347000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N1=2
0xffffc20000347000-0xffffc2000034a000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N2=2
0xffffc2000034a000-0xffffc2000034d000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N3=2
0xffffc20004381000-0xffffc20004402000  528384 alloc_large_system_hash+0x204/0x2c0 pages=128 vmalloc N0=32 N1=32 N2=32 N3=32
0xffffc20004402000-0xffffc20004803000 4198400 alloc_large_system_hash+0x204/0x2c0 pages=1024 vmalloc vpages N0=256 N1=256 N2=256 N3=256
0xffffc20004803000-0xffffc20004904000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc20004904000-0xffffc20004bec000 3047424 sys_swapon+0x640/0xac0 pages=743 vmalloc vpages N0=743
0xffffffffa0000000-0xffffffffa000f000   61440 sys_init_module+0xc27/0x1d00 pages=14 vmalloc N1=14
0xffffffffa000f000-0xffffffffa0014000   20480 sys_init_module+0xc27/0x1d00 pages=4 vmalloc N0=4
0xffffffffa0014000-0xffffffffa0017000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N0=2
0xffffffffa0017000-0xffffffffa0022000   45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N1=10
0xffffffffa0022000-0xffffffffa0028000   24576 sys_init_module+0xc27/0x1d00 pages=5 vmalloc N3=5
0xffffffffa0028000-0xffffffffa0050000  163840 sys_init_module+0xc27/0x1d00 pages=39 vmalloc N1=39
0xffffffffa0050000-0xffffffffa0052000    8192 sys_init_module+0xc27/0x1d00 pages=1 vmalloc N1=1
0xffffffffa0052000-0xffffffffa0056000   16384 sys_init_module+0xc27/0x1d00 pages=3 vmalloc N1=3
0xffffffffa0056000-0xffffffffa0081000  176128 sys_init_module+0xc27/0x1d00 pages=42 vmalloc N3=42
0xffffffffa0081000-0xffffffffa00ae000  184320 sys_init_module+0xc27/0x1d00 pages=44 vmalloc N3=44
0xffffffffa00ae000-0xffffffffa00b1000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2
0xffffffffa00b1000-0xffffffffa00b9000   32768 sys_init_module+0xc27/0x1d00 pages=7 vmalloc N0=7
0xffffffffa00b9000-0xffffffffa00c4000   45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N3=10
0xffffffffa00c6000-0xffffffffa00e0000  106496 sys_init_module+0xc27/0x1d00 pages=25 vmalloc N2=25
0xffffffffa00e0000-0xffffffffa00f1000   69632 sys_init_module+0xc27/0x1d00 pages=16 vmalloc N2=16
0xffffffffa00f1000-0xffffffffa00f4000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2
0xffffffffa00f4000-0xffffffffa00f7000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2

[akpm@linux-foundation.org: fix comment]
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a47a126a
  61. 05 6月, 2008 1 次提交
    • M
      genirq: Expose default irq affinity mask (take 3) · 18404756
      由 Max Krasnyansky 提交于 
      Current IRQ affinity interface does not provide a way to set affinity
for the IRQs that will be allocated/activated in the future.
This patch creates /proc/irq/default_smp_affinity that lets users set
default affinity mask for the newly allocated IRQs. Changing the default
does not affect affinity masks for the currently active IRQs, they
have to be changed explicitly.

Updated based on Paul J's comments and added some more documentation.
Signed-off-by: NMax Krasnyansky <maxk@qualcomm.com>
Cc: pj@sgi.com
Cc: a.p.zijlstra@chello.nl
Cc: tglx@linutronix.de
Cc: rdunlap@xenotime.net
Cc: mingo@elte.hu
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      18404756