- 03 5月, 2011 6 次提交
-
-
由 Jiri Pirko 提交于
84c49d8c ("veth: remove unneeded ifname code from veth_newlink()") caused regression on veth creation. This patch reverts the original one. Reported-by: NMichał Mirosław <mirqus@gmail.com> Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rabin Vincent 提交于
The reset loop check should check the MII_BMCR register value for BMCR_RESET rather than for MII_BMCR (the register address, which also happens to be zero). Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
tg3 is supposed to enable WoL by default on adapters which support that, but it fails to do so unless the adapter's /sys/devices/.../power/wakeup file contains 'enabled' during the initialization of the adapter. Fix that by making tg3 use device_set_wakeup_enable() to enable wakeup automatically whenever WoL should be enabled by default. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lifeng Sun 提交于
ioctl() calls against a socket with an inappropriate ioctl operation are incorrectly returning EINVAL rather than ENOTTY: [ENOTTY] Inappropriate I/O control operation. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=33992Signed-off-by: NLifeng Sun <lifongsun@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 5月, 2011 2 次提交
-
-
由 Alexey Dobriyan 提交于
fib_trie_table() is called during netns creation and Chromium uses clone(CLONE_NEWNET) to sandbox renderer process. Don't print anything. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This fixes the following oops discovered by Dan Aloni: > Anyway, the following is the output of the Oops that I got on the > Ubuntu kernel on which I first detected the problem > (2.6.37-12-generic). The Oops that followed will be more useful, I > guess. >[ 5594.669852] BUG: unable to handle kernel NULL pointer dereference > at (null) > [ 5594.681606] IP: [<ffffffff81550b7b>] unix_dgram_recvmsg+0x1fb/0x420 > [ 5594.687576] PGD 2a05d067 PUD 2b951067 PMD 0 > [ 5594.693720] Oops: 0002 [#1] SMP > [ 5594.699888] last sysfs file: The bug was that unix domain sockets use a pseduo packet for connecting and accept uses that psudo packet to get the socket. In the buggy seqpacket case we were allowing unconnected sockets to call recvmsg and try to receive the pseudo packet. That is always wrong and as of commit 7361c36c the pseudo packet had become enough different from a normal packet that the kernel started oopsing. Do for seqpacket_recv what was done for seqpacket_send in 2.5 and only allow it on connected seqpacket sockets. Cc: stable@kernel.org Tested-by: NDan Aloni <dan@aloni.org> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2011 7 次提交
-
-
由 artpol 提交于
Add support of pause frames advertise in mii_get_an. This provides all drivers that use mii_ethtool_gset to represent their own and Link partner flow control abilities in ethtool. Signed-off-by: NArtem Polyakov <artpol84@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adam Jaremko 提交于
Signed-off-by: NAdam Jaremko <adam.jaremko@gmail.com> Acked-by: NPo-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
Somebody has to do it, however unfortunate be the cause. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Williams 提交于
Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether compatible ports, so recognize and expose them. Signed-off-by: NDan Williams <dcbw@redhat.com> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
This oops was recently reported to me: invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device CPU 1 Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4 shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mod [last unloaded: bnx2] Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4 shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mod [last unloaded: bnx2] Pid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21 -[797251Z]- RIP: 0010:[<ffffffffa058b270>] [<ffffffffa058b270>] 0xffffffffa058b270 RSP: 0018:ffff880002083e48 EFLAGS: 00010246 RAX: ffff880002083e90 RBX: ffff88007ccd4000 RCX: 0000000000000000 RDX: 0000000000000100 RSI: dead000000200200 RDI: ffff8800007b8700 RBP: ffff880002083ed0 R08: ffff88000208db40 R09: 0000022d191d27c8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800007b9bc8 R13: ffff880002083e90 R14: ffff8800007b8700 R15: ffffffffa058b270 FS: 00007fbb3bcf7700(0000) GS:ffff880002080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001664a98 CR3: 0000000060395000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process pidof (pid: 23900, threadinfo ffff8800007e8000, task ffff8800091c0040) Stack: ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820 <0> ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000 <0> ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d Call Trace: <IRQ> [<ffffffff81079f77>] ? run_timer_softirq+0x197/0x340 [<ffffffff8109e010>] ? tick_sched_timer+0x0/0xc0 [<ffffffff8102a00d>] ? lapic_next_event+0x1d/0x30 [<ffffffff8106f737>] __do_softirq+0xb7/0x1e0 [<ffffffff81092cc0>] ? hrtimer_interrupt+0x140/0x250 [<ffffffff81185f90>] ? filldir+0x0/0xe0 [<ffffffff8100c2cc>] call_softirq+0x1c/0x30 [<ffffffff8100df05>] do_softirq+0x65/0xa0 [<ffffffff8106f525>] irq_exit+0x85/0x90 [<ffffffff814e3340>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bc93>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81211ba5>] ? selinux_file_permission+0x45/0x150 [<ffffffff81262a75>] ? _atomic_dec_and_lock+0x55/0x80 [<ffffffff812050c6>] security_file_permission+0x16/0x20 [<ffffffff811861c1>] vfs_readdir+0x71/0xe0 [<ffffffff81186399>] sys_getdents+0x89/0xf0 [<ffffffff8100b172>] system_call_fastpath+0x16/0x1b It occured during some stress testing, in which the reporter was repeatedly removing and modprobing the bnx2 module while doing various other random operations on the bnx2 registered net device. Noting that this error occured on a serdes based device, we noted that there were a few ethtool operations (most notably self_test and set_phys_id) that have execution paths that lead into bnx2_setup_serdes_phy. This function is notable because it executes a mod_timer call, which starts the bp->timer running. Currently bnx2 is setup to assume that this timer only nees to be stopped when bnx2_close or bnx2_suspend is called. Since the above ethtool operations are not gated on the net device having been opened however, that assumption is incorrect, and can lead to the timer still running after the module has been removed, leading to the oops above (as well as other simmilar oopses). Fix the problem by ensuring that the timer is stopped when pci_device_unregister is called. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Reported-by: NHushan Jia <hjia@redhat.com> CC: Michael Chan <mchan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Need to use broadcast sta_id for management frames, otherwise we broke BA session in the firmware and get messages like that: "Received BA when not expected" or (on older kernels): "BA scd_flow 0 does not match txq_id 10" This fix regression introduced in 2.6.35 during station management code rewrite by: commit 2a87c26b Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Apr 30 11:30:45 2010 -0700 iwlwifi: use iwl_find_station less Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Need to use broadcast sta_id for management frames, otherwise we broke BA session in the firmware and get messages like that: "Received BA when not expected" or (on older kernels): "BA scd_flow 0 does not match txq_id 10" This fix regression introduced in 2.6.35 during station management code rewrite by: commit 2a87c26b Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Apr 30 11:30:45 2010 -0700 iwlwifi: use iwl_find_station less Patch partially resolve: https://bugzilla.kernel.org/show_bug.cgi?id=16691 However, there are still 11n performance problems on 4965 and 5xxx devices that need to be investigated. Cc: stable@kernel.org # 2.6.35+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 4月, 2011 5 次提交
-
-
由 Peter Korsgaard 提交于
The 88e6085 has a few differences from the other devices in the port control registers, causing unknown multicast/broadcast packets to get dropped when using the standard port setup. At the same time update kconfig to clarify that the mv88e6085 is now supported. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Stewart 提交于
Resubmit interrupt URB if device is open. Use a flag set in usbnet_open() to determine this state. Also kill and free interrupt URB in usbnet_disconnect(). [Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git] Signed-off-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Fix the following: WARNING: at drivers/net/wireless/iwlegacy/iwl-4965.c:1128 \ iwl4965_send_tx_power+0x61/0x102 [iwl4965]() Hardware name: [...] TX Power requested while scanning! Pid: 5723, comm: kworker/u:28 Not tainted 2.6.39-0.rc4.4.fc14.x86_64 #1 Call Trace: [<ffffffff8104e27b>] warn_slowpath_common+0x85/0x9d [<ffffffffa02782e0>] ? iwl4965_show_temperature+0x49/0x49 [iwl4965] [<ffffffff8104e336>] warn_slowpath_fmt+0x46/0x48 [<ffffffffa027712f>] iwl4965_send_tx_power+0x61/0x102 [iwl4965] [<ffffffff81477e05>] ? mutex_lock+0x36/0x50 [<ffffffffa0278337>] iwl4965_bg_txpower_work+0x57/0x73 [iwl4965] [<ffffffff810647f3>] process_one_work+0x18d/0x286 [<ffffffff81065a5e>] worker_thread+0xfd/0x181 [<ffffffff81065961>] ? manage_workers.clone.16+0x172/0x172 [<ffffffff81069036>] kthread+0x82/0x8a [<ffffffff81480524>] kernel_thread_helper+0x4/0x10 [<ffffffff81068fb4>] ? kthread_worker_fn+0x14b/0x14b [<ffffffff81480520>] ? gs_change+0x13/0x13 Reported-and-tested-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
commit 5ed540ae change the led behavior for iwlwifi driver; the side effect cause led blink all the time. Modify the led blink table to fix this problem Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 4月, 2011 3 次提交
-
-
由 Steffen Klassert 提交于
IPsec extended sequence numbers can be used only with the new anti-replay window implementation. So check if the new implementation is used if an esn state is inserted and return an error if it is not. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
When we use IPsec extended sequence numbers, we may overwrite the last scatterlist of the associated data by the scatterlist for the skb. This patch fixes this by placing the scatterlist for the skb right behind the last scatterlist of the associated data. esp4 does it already like that. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
On replay initialization, we compute the size of the replay buffer to see if the replay window fits into the buffer. This computation lacks a mutliplication by 8 because we need the size in bit, not in byte. So we might return an error even though the replay window would fit into the buffer. This patch fixes this issue. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2011 1 次提交
-
-
由 Held Bernhard 提交于
Since commit 62fa8a84 (net: Implement read-only protection and COW'ing of metrics.) the kernel throws an oops. [ 101.620985] BUG: unable to handle kernel NULL pointer dereference at (null) [ 101.621050] IP: [< (null)>] (null) [ 101.621084] PGD 6e53c067 PUD 3dd6a067 PMD 0 [ 101.621122] Oops: 0010 [#1] SMP [ 101.621153] last sysfs file: /sys/devices/virtual/ppp/ppp/uevent [ 101.621192] CPU 2 [ 101.621206] Modules linked in: l2tp_ppp pppox ppp_generic slhc l2tp_netlink l2tp_core deflate zlib_deflate twofish_x86_64 twofish_common des_generic cbc ecb sha1_generic hmac af_key iptable_filter snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device loop snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm snd_timer snd i2c_i801 iTCO_wdt psmouse soundcore snd_page_alloc evdev uhci_hcd ehci_hcd thermal [ 101.621552] [ 101.621567] Pid: 5129, comm: openl2tpd Not tainted 2.6.39-rc4-Quad #3 Gigabyte Technology Co., Ltd. G33-DS3R/G33-DS3R [ 101.621637] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 101.621684] RSP: 0018:ffff88003ddeba60 EFLAGS: 00010202 [ 101.621716] RAX: ffff88003ddb5600 RBX: ffff88003ddb5600 RCX: 0000000000000020 [ 101.621758] RDX: ffffffff81a69a00 RSI: ffffffff81b7ee61 RDI: ffff88003ddb5600 [ 101.621800] RBP: ffff8800537cd900 R08: 0000000000000000 R09: ffff88003ddb5600 [ 101.621840] R10: 0000000000000005 R11: 0000000000014b38 R12: ffff88003ddb5600 [ 101.621881] R13: ffffffff81b7e480 R14: ffffffff81b7e8b8 R15: ffff88003ddebad8 [ 101.621924] FS: 00007f06e4182700(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 [ 101.621971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.622005] CR2: 0000000000000000 CR3: 0000000045274000 CR4: 00000000000006e0 [ 101.622046] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 101.622087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 101.622129] Process openl2tpd (pid: 5129, threadinfo ffff88003ddea000, task ffff88003de9a280) [ 101.622177] Stack: [ 101.622191] ffffffff81447efa ffff88007d3ded80 ffff88003de9a280 ffff88007d3ded80 [ 101.622245] 0000000000000001 ffff88003ddebbb8 ffffffff8148d5a7 0000000000000212 [ 101.622299] ffff88003dcea000 ffff88003dcea188 ffffffff00000001 ffffffff81b7e480 [ 101.622353] Call Trace: [ 101.622374] [<ffffffff81447efa>] ? ipv4_blackhole_route+0x1ba/0x210 [ 101.622415] [<ffffffff8148d5a7>] ? xfrm_lookup+0x417/0x510 [ 101.622450] [<ffffffff8127672a>] ? extract_buf+0x9a/0x140 [ 101.622485] [<ffffffff8144c6a0>] ? __ip_flush_pending_frames+0x70/0x70 [ 101.622526] [<ffffffff8146fbbf>] ? udp_sendmsg+0x62f/0x810 [ 101.622562] [<ffffffff813f98a6>] ? sock_sendmsg+0x116/0x130 [ 101.622599] [<ffffffff8109df58>] ? find_get_page+0x18/0x90 [ 101.622633] [<ffffffff8109fd6a>] ? filemap_fault+0x12a/0x4b0 [ 101.622668] [<ffffffff813fb5c4>] ? move_addr_to_kernel+0x64/0x90 [ 101.622706] [<ffffffff81405d5a>] ? verify_iovec+0x7a/0xf0 [ 101.622739] [<ffffffff813fc772>] ? sys_sendmsg+0x292/0x420 [ 101.622774] [<ffffffff810b994a>] ? handle_pte_fault+0x8a/0x7c0 [ 101.622810] [<ffffffff810b76fe>] ? __pte_alloc+0xae/0x130 [ 101.622844] [<ffffffff810ba2f8>] ? handle_mm_fault+0x138/0x380 [ 101.622880] [<ffffffff81024af9>] ? do_page_fault+0x189/0x410 [ 101.622915] [<ffffffff813fbe03>] ? sys_getsockname+0xf3/0x110 [ 101.622952] [<ffffffff81450c4d>] ? ip_setsockopt+0x4d/0xa0 [ 101.622986] [<ffffffff813f9932>] ? sockfd_lookup_light+0x22/0x90 [ 101.623024] [<ffffffff814b61fb>] ? system_call_fastpath+0x16/0x1b [ 101.623060] Code: Bad RIP value. [ 101.623090] RIP [< (null)>] (null) [ 101.623125] RSP <ffff88003ddeba60> [ 101.623146] CR2: 0000000000000000 [ 101.650871] ---[ end trace ca3856a7d8e8dad4 ]--- [ 101.651011] __sk_free: optmem leakage (160 bytes) detected. The oops happens in dst_metrics_write_ptr() include/net/dst.h:124: return dst->ops->cow_metrics(dst, p); dst->ops->cow_metrics is NULL and causes the oops. Provide cow_metrics() methods, like we did in commit 214f45c9 (net: provide default_advmss() methods to blackhole dst_ops) Signed-off-by: NHeld Bernhard <berny156@gmx.de> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2011 2 次提交
-
-
由 Hans Petter Selasky 提交于
The default maximum transmit length for NCM USB frames should be so that a short packet happens at the end if the device supports a length greater than the defined maximum. This is achieved by adding 4 bytes to the maximum length so that the existing logic can fit a short packet there. Signed-off-by: NHans Petter Selasky <hselasky@c2i.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2011 2 次提交
-
-
由 François Romieu 提交于
The firmware is cached during the first successfull call to open() and released once the network device is unregistered. The driver uses the cached firmware between open() and unregister_netdev(). So far the firmware is optional : a failure to load the firmware does not prevent open() to success. It is thus necessary to 1) unregister all 816x / 810[23] devices and 2) force a driver probe to issue a new firmware load. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Fixed-by: NCiprian Docan <docan@eden.rutgers.edu> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
-
由 Vladislav Zolotarov 提交于
Fixed packets parameters for FW in UDP checksum offload flow. Do not dereference TCP headers on non TCP frames. Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2011 2 次提交
-
-
由 Neil Horman 提交于
A deadlock was reported to me recently that occured when netconsole was being used in a virtual guest. If the virtio_net driver was removed while netconsole was setup to use an interface that was driven by that driver, the guest deadlocked. No backtrace was provided because netconsole was the only console configured, but it became clear pretty quickly what the problem was. In netconsole_netdev_event, if we get an unregister event, we call __netpoll_cleanup with the target_list_lock held and irqs disabled. __netpoll_cleanup can, if pending netpoll packets are waiting call cancel_delayed_work_sync, which is a sleeping path. the might_sleep call in that path gets triggered, causing a console warning to be issued. The netconsole write handler of course tries to take the target_list_lock again, which we already hold, causing deadlock. The fix is pretty striaghtforward. Simply drop the target_list_lock and re-enable irqs prior to calling __netpoll_cleanup, the re-acquire the lock, and restart the loop. Confirmed by myself to fix the problem reported. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2011 6 次提交
-
-
由 David S. Miller 提交于
This reverts commit 1e253c3b. It breaks 802.3ad bonding inside of a bridge. The commit was meant to support transport bridging, and specifically virtual machines bridged to an ethernet interface connected to a switch port wiht 802.1x enabled. But this isn't the way to do it, it breaks too many other things. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tim Gardner 提交于
The mechanism used to initiate work events from the interrupt handler has a classic read/modify/write race between the interrupt handler that sets the condition, and the worker task that reads and clears the condition. Close these races by using atomic bit fields. Cc: stable@kernel.org Cc: Jie Yang <jie.yang@atheros.com> Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
The commit 609ff3bb ("be2net: add code to display temperature of ASIC") adds support to display temperature of ASIC but there is missing increment of work_counter in be_worker. Because of this 1) the function be_cmd_get_die_temperature is called every 1 second instead of every 32 seconds 2) be_cmd_get_die_temperature is called, although it is not supported. This patch fixes this bug. Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Egerer 提交于
The changes introduced with git-commit a02e4b7d ("ipv6: Demark default hoplimit as zero.") missed to remove the hoplimit initialization. As a result, ipv6_get_mtu interprets the return value of dst_metric_raw (-1) as 255 and answers ping6 with this hoplimit. This patche removes the line such that ping6 is answered with the hoplimit value configured via sysctl. Signed-off-by: NThomas Egerer <thomas.egerer@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Galbusera 提交于
mac-fec.c was setting individual UDP address registers instead of multicast group address registers when joining a multicast group. This prevented from correctly receiving UDP multicast packets. According to datasheet, replaced hash_table_high and hash_table_low with grp_hash_table_high and grp_hash_table_low respectively. Also renamed hash_table_* with grp_hash_table_* in struct fec declaration for 8xx: these registers are used only for multicast there. Tested on a MPC5121 based board. Build tested also against mpc866_ads_defconfig. Signed-off-by: NAndrea Galbusera <gizero@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
At this point, skb->data points to skb_transport_header. So, headroom check is wrong. For some case:bridge(UFO is on) + eth device(UFO is off), there is no enough headroom for IPv6 frag head. But headroom check is always false. This will bring about data be moved to there prior to skb->head, when adding IPv6 frag header to skb. Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2011 4 次提交
-
-
由 Stanislaw Gruszka 提交于
Since commit a120e912 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link, making bisection of other problems impossible. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Since commit a120e912 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Feb 19 15:47:33 2010 -0800 iwlwifi: sanity check before counting number of tfds can be free we use skb->data after calling ieee80211_tx_status_irqsafe(), which could free skb instantly. On current kernels I do not observe practical problems related with bug, but on 2.6.35.y it cause random system hangs when stressing wireless link. Cc: stable@kernel.org # 2.6.32+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The locking with SMPS requests means that the debugs file should lock the mgd mutex, not the iflist mutex. Calls to __ieee80211_request_smps() need to hold that mutex, so add an assertion. This has always been wrong, but for some reason never been noticed, probably because the locking error only happens while unassociated. Cc: stable@kernel.org [2.6.34+] Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-