Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 03 8月, 2011 1 次提交
  3. 09 7月, 2011 1 次提交
  5. 08 6月, 2011 1 次提交
    • A
      usb-storage: redo incorrect reads · 21c13a4f
      由 Alan Stern 提交于 
      Some USB mass-storage devices have bugs that cause them not to handle
the first READ(10) command they receive correctly.  The Corsair
Padlock v2 returns completely bogus data for its first read (possibly
it returns the data in encrypted form even though the device is
supposed to be unlocked).  The Feiya SD/SDHC card reader fails to
complete the first READ(10) command after it is plugged in or after a
new card is inserted, returning a status code that indicates it thinks
the command was invalid, which prevents the kernel from retrying the
read.

Since the first read of a new device or a new medium is for the
partition sector, the kernel is unable to retrieve the device's
partition table.  Users have to manually issue an "hdparm -z" or
"blockdev --rereadpt" command before they can access the device.

This patch (as1470) works around the problem.  It adds a new quirk
flag, US_FL_INVALID_READ10, indicating that the first READ(10) should
always be retried immediately, as should any failing READ(10) commands
(provided the preceding READ(10) command succeeded, to avoid getting
stuck in a loop).  The patch also adds appropriate unusual_devs
entries containing the new flag.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NSven Geggus <sven-usbst@geggus.net>
Tested-by: NPaul Hartman <paul.hartman+linux@gmail.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      21c13a4f
  7. 01 6月, 2011 1 次提交
    • Y
      intel-iommu: Enable super page (2MiB, 1GiB, etc.) support · 6dd9a7c7
      由 Youquan Song 提交于 
      There are no externally-visible changes with this. In the loop in the
internal __domain_mapping() function, we simply detect if we are mapping:
  - size >= 2MiB, and
  - virtual address aligned to 2MiB, and
  - physical address aligned to 2MiB, and
  - on hardware that supports superpages.

(and likewise for larger superpages).

We automatically use a superpage for such mappings. We never have to
worry about *breaking* superpages, since we trust that we will always
*unmap* the same range that was mapped. So all we need to do is ensure
that dma_pte_clear_range() will also cope with superpages.

Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so
it can return a PTE at the appropriate level rather than always
extending the page tables all the way down to level 1. Again, this is
simplified by the fact that we should never encounter existing small
pages when we're creating a mapping; any old mapping that used the same
virtual range will have been entirely removed and its obsolete page
tables freed.

Provide an 'intel_iommu=sp_off' argument on the command line as a
chicken bit. Not that it should ever be required.

==

The original commit seen in the iommu-2.6.git was Youquan's
implementation (and completion) of my own half-baked code which I'd
typed into an email. Followed by half a dozen subsequent 'fixes'.

I've taken the unusual step of rewriting history and collapsing the
original commits in order to keep the main history simpler, and make
life easier for the people who are going to have to backport this to
older kernels. And also so I can give it a more coherent commit comment
which (hopefully) gives a better explanation of what's going on.

The original sequence of commits leading to identical code was:

Youquan Song (3):
      intel-iommu: super page support
      intel-iommu: Fix superpage alignment calculation error
      intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte()

David Woodhouse (4):
      intel-iommu: Precalculate superpage support for dmar_domain
      intel-iommu: Fix hardware_largepage_caps()
      intel-iommu: Fix inappropriate use of superpages in __domain_mapping()
      intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      6dd9a7c7
  9. 25 5月, 2011 1 次提交
  11. 20 5月, 2011 1 次提交
  13. 18 5月, 2011 2 次提交
  15. 05 4月, 2011 2 次提交
  17. 31 3月, 2011 1 次提交
  19. 23 3月, 2011 3 次提交
  21. 12 3月, 2011 1 次提交
  23. 04 3月, 2011 1 次提交
  25. 26 2月, 2011 1 次提交
    • T
      genirq: Provide forced interrupt threading · 8d32a307
      由 Thomas Gleixner 提交于 
      Add a commandline parameter "threadirqs" which forces all interrupts except
those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to
allow retrieving better debug data from crashing interrupt handlers. If
"threadirqs" is not enabled on the kernel command line, then there is no
impact in the interrupt hotpath.

Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after
marking the interrupts which cant be threaded IRQF_NO_THREAD. All
interrupts which have IRQF_TIMER set are implict marked
IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded.

Forced threading hard interrupts also forces all soft interrupt
handling into thread context.

When enabled it might slow down things a bit, but for debugging problems in
interrupt code it's a reasonable penalty as it does not immediately
crash and burn the machine when an interrupt handler is buggy.

Some test results on a Core2Duo machine:

Cache cold run of:
 # time git grep irq_desc

      non-threaded       threaded
 real 1m18.741s          1m19.061s
 user 0m1.874s           0m1.757s
 sys  0m5.843s           0m5.427s

 # iperf -c server
non-threaded
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
threaded
[  3]  0.0-10.0 sec  1.09 GBytes   939 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   937 Mbits/sec
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.772668648@linutronix.de>
      8d32a307
  27. 22 2月, 2011 3 次提交
  29. 26 1月, 2011 1 次提交
  31. 12 1月, 2011 1 次提交
  33. 08 1月, 2011 1 次提交
  35. 03 1月, 2011 2 次提交
  37. 18 12月, 2010 1 次提交
  39. 14 12月, 2010 1 次提交
  41. 10 12月, 2010 1 次提交
  43. 30 11月, 2010 1 次提交
    • M
      sched: Add 'autogroup' scheduling feature: automated per session task groups · 5091faa4
      由 Mike Galbraith 提交于 
      A recurring complaint from CFS users is that parallel kbuild has
a negative impact on desktop interactivity.  This patch
implements an idea from Linus, to automatically create task
groups.  Currently, only per session autogroups are implemented,
but the patch leaves the way open for enhancement.

Implementation: each task's signal struct contains an inherited
pointer to a refcounted autogroup struct containing a task group
pointer, the default for all tasks pointing to the
init_task_group.  When a task calls setsid(), a new task group
is created, the process is moved into the new task group, and a
reference to the preveious task group is dropped.  Child
processes inherit this task group thereafter, and increase it's
refcount.  When the last thread of a process exits, the
process's reference is dropped, such that when the last process
referencing an autogroup exits, the autogroup is destroyed.

At runqueue selection time, IFF a task has no cgroup assignment,
its current autogroup is used.

Autogroup bandwidth is controllable via setting it's nice level
through the proc filesystem:

  cat /proc/<pid>/autogroup

Displays the task's group and the group's nice level.

  echo <nice level> > /proc/<pid>/autogroup

Sets the task group's shares to the weight of nice <level> task.
Setting nice level is rate limited for !admin users due to the
abuse risk of task group locking.

The feature is enabled from boot by default if
CONFIG_SCHED_AUTOGROUP=y is selected, but can be disabled via
the boot option noautogroup, and can also be turned on/off on
the fly via:

  echo [01] > /proc/sys/kernel/sched_autogroup_enabled

... which will automatically move tasks to/from the root task group.
Signed-off-by: NMike Galbraith <efault@gmx.de>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul Turner <pjt@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
[ Removed the task_group_path() debug code, and fixed !EVENTFD build failure. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <1290281700.28711.9.camel@maggy.simson.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5091faa4
  45. 29 11月, 2010 1 次提交
  47. 25 11月, 2010 1 次提交
    • M
      cgroups: make swap accounting default behavior configurable · a42c390c
      由 Michal Hocko 提交于 
      Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP
configuration option and then it is turned on by default.  There is a boot
option (noswapaccount) which can disable this feature.

This makes it hard for distributors to enable the configuration option as
this feature leads to a bigger memory consumption and this is a no-go for
general purpose distribution kernel.  On the other hand swap accounting
may be very usuful for some workloads.

This patch adds a new configuration option which controls the default
behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED).  If the option is selected
then the feature is turned on by default.

It also adds a new boot parameter swapaccount[=1|0] which enhances the
original noswapaccount parameter semantic by means of enable/disable logic
(defaults to 1 if no value is provided to be still consistent with
noswapaccount).

The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is
enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well)
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a42c390c
  49. 11 11月, 2010 1 次提交
  51. 27 10月, 2010 1 次提交
    • B
      resources: support allocating space within a region from the top down · e7f8567d
      由 Bjorn Helgaas 提交于 
      Allocate space from the top of a region first, then work downward,
if an architecture desires this.

When we allocate space from a resource, we look for gaps between children
of the resource.  Previously, we always looked at gaps from the bottom up.
For example, given this:

    [mem 0xbff00000-0xf7ffffff] PCI Bus 0000:00
      [mem 0xbff00000-0xbfffffff] gap -- available
      [mem 0xc0000000-0xdfffffff] PCI Bus 0000:02
      [mem 0xe0000000-0xf7ffffff] gap -- available

we attempted to allocate from the [mem 0xbff00000-0xbfffffff] gap first,
then the [mem 0xe0000000-0xf7ffffff] gap.

With this patch an architecture can choose to allocate from the top gap
[mem 0xe0000000-0xf7ffffff] first.

We can't do this across the board because iomem_resource.end is initialized
to 0xffffffff_ffffffff on 64-bit architectures, and most machines can't
address the entire 64-bit physical address space.  Therefore, we only
allocate top-down if the arch requests it by clearing
"resource_alloc_from_bottom".
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      e7f8567d
  53. 25 10月, 2010 1 次提交
  55. 24 10月, 2010 3 次提交
  57. 23 10月, 2010 2 次提交
    • A
      SYSFS: Allow boot time switching between deprecated and modern sysfs layout · e52eec13
      由 Andi Kleen 提交于 
      I have some systems which need legacy sysfs due to old tools that are
making assumptions that a directory can never be a symlink to another
directory, and it's a big hazzle to compile separate kernels for them.

This patch turns CONFIG_SYSFS_DEPRECATED into a run time option
that can be switched on/off the kernel command line. This way
the same binary can be used in both cases with just a option
on the command line.

The old CONFIG_SYSFS_DEPRECATED_V2 option is still there to set
the default. I kept the weird name to not break existing
config files.

Also the compat code can be still completely disabled by undefining
CONFIG_SYSFS_DEPRECATED_SWITCH -- just the optimizer takes
care of this now instead of lots of ifdefs. This makes the code
look nicer.

v2: This is an updated version on top of Kay's patch to only
handle the block devices. I tested it on my old systems
and that seems to work.

Cc: axboe@kernel.dk
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      e52eec13
    • T
      Dynamic Debug: Introduce ddebug_query= boot parameter · a648ec05
      由 Thomas Renninger 提交于 
      Dynamic debug lacks the ability to enable debug messages at boot time.
One could patch initramfs or service startup scripts to write to
/sys/../dynamic_debug/control, but this sucks.

This patch makes it possible to pass a query in the same format one can
write to /sys/../dynamic_debug/control via boot param.
When dynamic debug gets initialized, this query will automatically be
applied.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: jbaron@redhat.com
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      a648ec05
  59. 19 10月, 2010 1 次提交