Making the lists signed fixes sparse warnings like:

	arch/arm/mach-imx/mach-mx27_3ds.c:94:31: warning: incorrect type in argument 1 (different signedness)
	arch/arm/mach-imx/mach-mx27_3ds.c:94:31:    expected int const *pin_list
	arch/arm/mach-imx/mach-mx27_3ds.c:94:31:    got unsigned int static [toplevel] *<noident>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This fixes the following sparse warning:

	arch/arm/mach-imx/pcm970-baseboard.c:203:30: warning: symbol 'pcm970_sja1000_platform_data' was not declared. Should it be static?
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This fixes many sparse warnings like:

	arch/arm/mach-imx/clock-imx27.c:597:1: warning: Using plain integer as NULL pointer
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Addiontionally make the interrupt #defines match the base address
defines MX.._NFC_BASE_ADDR.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The driver recently learned to handle platform ids.  Make use of this
new feature.  The up side is that the driver needs less knowledge about
the spi interfaces used on different SoCs.
Acked-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This is a follow up to

	c6987159 (ARM: imx: dynamically register imx-i2c devices (imx27))
	2b92084f (ARM: imx: dynamically register imx-i2c devices (imx21))
	6348e6b5 (ARM: imx: dynamically register imx-i2c devices (imx1))
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

For mx1_defconfig this yields:

	add/remove: 1/0 grow/shrink: 1/4 up/down: 49/-108 (-59)
	function                                     old     new   delta
	imx1_imx_uart_data                             -      48     +48
	kernel_config_data                          7277    7278      +1
	imx_add_imx_uart_1irq                        132     128      -4
	imx_add_imx_uart_3irq                        164     156      -8
	scb9328_init                                  96      64     -32
	mx1ads_init                                  220     156     -64

for mx21_defconfig this yields:

	add/remove: 1/0 grow/shrink: 0/3 up/down: 64/-52 (12)
	function                                     old     new   delta
	imx21_imx_uart_data                            -      64     +64
	imx_add_imx_uart_3irq                        160     156      -4
	imx_add_imx_uart_1irq                        140     136      -4
	mx21ads_board_init                           220     176     -44

for a random mx25 config this yields:

	add/remove: 1/0 grow/shrink: 0/5 up/down: 80/-56 (24)
	function                                     old     new   delta
	imx25_imx_uart_data                            -      80     +80
	imx_add_imx_uart_3irq                        160     156      -4
	imx_add_imx_uart_1irq                        140     136      -4
	mx25pdk_init                                 288     272     -16
	eukrea_mbimxsd_baseboard_init                272     256     -16
	eukrea_cpuimx25_init                         252     236     -16

for mx27_defconfig this yields:

	add/remove: 1/0 grow/shrink: 0/10 up/down: 96/-280 (-184)
	function                                     old     new   delta
	imx27_imx_uart_data                            -      96     +96
	imx_add_imx_uart_3irq                        160     156      -4
	imx_add_imx_uart_1irq                        140     136      -4
	pca100_init                                  560     544     -16
	mx27pdk_init                                 112      96     -16
	mx27lite_init                                 92      76     -16
	eukrea_cpuimx27_init                         332     316     -16
	pcm038_init                                  388     348     -40
	mxt_td60_board_init                          320     280     -40
	eukrea_mbimx27_baseboard_init                476     436     -40
	mx27ads_board_init                           368     280     -88

and finally for mx3_defconfig:

	add/remove: 2/0 grow/shrink: 0/9 up/down: 128/-344 (-216)
	function                                     old     new   delta
	imx31_imx_uart_data                            -      80     +80
	imx35_imx_uart_data                            -      48     +48
	imx_add_imx_uart_1irq                        132     128      -4
	imx_add_imx_uart_3irq                        164     152     -12
	mx31moboard_devboard_init                    360     344     -16
	mx31lite_db_init                             176     160     -16
	mx31moboard_smartbot_init                    384     360     -24
	kzm_board_init                               232     208     -24
	armadillo5x0_init                            392     364     -28
	mx31lilly_db_init                            248     208     -40
	mxc_board_init                              3760    3580    -180
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Group soc specific data in a global struct instead of repeating it for
each call to imxXX_add_spi_imxX.  The structs holding the actual data
are placed in .init.constdata and so don't do much harm.  Compared to
the previous approach this reduces code size to call imx_add_spi_imx.
Acked-by: NJason Wang <jason77.wang@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Vista Silicon Visstrim_m10 i.MX27 based board is used
as multimedia streaming server, access control and other
custom applications.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The build failure was introduced by

	13dd0c97 (USB: otg/ulpi: extend the generic ulpi driver.)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NIgor Grinberg <grinberg@compulab.co.il>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit

	7536cf99 (ARM: imx: dynamically register spi_imx devices (imx27))

introduced a variable named "pca100_spi0_data" but passed
"&pca100_spi_0_data" to imx27_add_spi_imx0.  This wasn't noticed earlier
because both SPI_IMX and MACH_PCA100 are not enabled in mx27_defconfig.

This fixes a build failure:

	arch/arm/mach-imx/mach-pca100.c: In function 'pca100_init':
	arch/arm/mach-imx/mach-pca100.c:411: error: 'pca100_spi_0_data' undeclared (first use in this function)
	arch/arm/mach-imx/mach-pca100.c:411: error: (Each undeclared identifier is reported only once
	arch/arm/mach-imx/mach-pca100.c:411: error: for each function it appears in.)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The commit 9a763bfb "get rid of mxc_gpio_init" changed gpio_init
and irq_init sequence. Usually we will call set_irq_chained_handler
in gpio_init functions, this should be called after the irq_init
called, otherwise the chained irq can't get propoer irq_chip and this
irq will remain masked even we called set_irq_chained_handler.
Signed-off-by: NJason Wang <jason77.wang@gmail.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

as per suggested by Sascha
Signed-off-by: NEric Bénard <eric@eukrea.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

the i2c_board_info structure landed into the SPI #if/#endif
which is wrong.
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

mx27_3ds: add support for the keypad
Signed-off-by: NRogerio Pimentel <rogerio.pimentel@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Make use of new mechanism to register a nand device.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Make use of new mechanism to register a nand device.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

As the kernel contains a copy of the GPL anyhow just get rid of the address
specification instead of fixing it.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This should be used instead of hard coding the corresponding platforms.
The feature test macro is needed to support different SOCs in a single
kernel image.  While at it rename dma-mx1-mx2 to dma-v1 as mx25 doesn't
use it and so the mx2 part is wrong and move the header to
arch/arm/mach-imx.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

MACH_... is reserved for machine support, so use SOC as prefix, not MACH.

This introduces new symbols SOC_IMX1, SOC_IMX21 and SOC_IMX27.  They are
selected by the old symbols for now.  There is no substitute for MACH_MX2
as most usages of MX2 only means MX21 + MX27 but not MX25.

Later the choice about CPU and CPU family should go away and the individual
machines should select the right SOC symbol.  This is a precondition to
support more than one SOC in a single kernel image.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Addionally remove an unneeded include.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

... and use cpp magic to reduce repetition.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This function is defined once for each imx family and so is in the way
when compiling a kernel for more than one SoC.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Finally all imx code should end up there, start with mach-mx2.  While
touching all files rename some files to use a hyphen instead of an
underscore.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch-imx is superseeded by the MXC architecture support.
This patch removes arch/arm/mach-imx from the kernel.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

From: David Brownell <dbrownell@users.sourceforge.net>

Fix GPIO-related build error on mach-imx platform:

  CC      drivers/spi/spi_gpio.o
In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/spi/spi_gpio.c:23:
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value':
arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2'
arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once
arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.)
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline':
arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment
arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment
	...
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The lack of an include file currently breaks compilation of
mx1ads_defconfig. As framebuffer support is not actively used for
mach-imx and the whole architecture will be replaced by mach-mx1
soon, just remove fb support.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>