Implement the panic_write function for the onenand driver. This waits
for any active command to complete/timeout, performs the write, waits
for it to complete and then returns.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

When the MTD provides a panic_write function, use it.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

MTDs are well suited for logging critical data and the mtdoops driver
allows kernel panics/oops to be written to flash in a blackbox flight
recorder fashion allowing better debugging and analysis of crashes.

Any kernel oops in user context can be easily handled since the kernel
continues as normal and any queued mtd writes are scheduled. Any kernel
oops in interrupt context results in a panic and the delayed writes will
not be scheduled however. The existing mtd->write function cannot be
called in interrupt context so these messages can never be written to
flash.

This patch adds a panic_write function pointer that drivers can
optionally implement which can be called in interrupt context. It is
only intended to be called when its known the kernel is about to panic
and we need to write to succeed. Since the kernel is not going to be
running for much longer, this function can break locks and delay to
ensure the write succeeds (but not sleep).
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NNick Spence <nick.spence@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This patch extends the physmap mapping driver to support multiple
resources for non-identical NOR chips that will be concatenated together
when selected.

This is needed for example for Intel 48F4400 512MBit chips, since they
consist of 2 single different NOR chips with different geometries. The
first (lower) one has botton boot sectors and the 2nd (upper) has top
boot sectors. This currently isn't handled correctly by calling the
physmap driver once with only one resource covering both chips in one
memory region. The same geometrie is used for both chips.

With this patch the following resource structure can be used to
describe the 48F4400 chip correctly:

static struct resource board_nor_resource[] = {
	[0] = {
		.start = 0xf8000000,
		.end = 0xfbffffff,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = 0xfc000000,
		.end = 0xffffffff,
		.flags = IORESOURCE_MEM,
	}
};
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

There is no suspend/resume operation in NFC driver at all, currently.
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

With CONFIG_MTD_PARTITIONS not set, got this:
drivers/mtd/nand/plat_nand.c:113: warning: unused variable 'pdata'
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Patch for unlocking all Intel flash that has instant locking on power up.
The patch has been tested on Intel M18, P30 and J3D Strata Flash.
  1.    The automatic unlocking can be disabled for a particular partition
         in the map or the command line.
     a. For the bit mask in the map it should look like:
         .mask_flags   = MTD_POWERUP_LOCK,
     b. For the command line parsing it should look like:
         mtdparts=0x80000(bootloader)lk
  2.    This will only unlock parts with instant individual block locking.
         Intel parts with legacy unlocking will not be unlocked.
Signed-off-by: NJustin Treon <justin_treon@yahoo.com>
Signed-off-by: NJared Hulbert <jaredeh@gmail.com>
Acked-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Call parse_mtd_partitions before checking board's partition_info, so
that "mtdparts=" option can override board's default setting.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Various minor cleaups to mtdoops:
  * Don't support the mtd->erasesize < OOPS_PAGE_SIZE case
  * Tweak printks and make the device mtdoops connects to more visible
  * CON_PRINTBUFFER flag is uneeded
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Add a spinlock to ensure writes to the mtdoops buffer memory are
sequential and don't race.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Writing to the flash needs to be done in a workqueue. The console
write functions may be called in any context which can lead to
lockups otherwise.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Add further error return code checks to the mtdoops driver.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

drivers/mtd/devices/lart.c:119:#define FLASH_DEVICE_16mbit_BOTTOM 0x88f488f4
As was, unless "manufacturer != FLASH_MANUFACTURER" this returned true
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

drivers/mtd/ubi/scan.c: In function 'ubi_scan':
drivers/mtd/ubi/scan.c:772: warning: 'ec' may be used uninitialized in this function
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

drivers/mtd/ubi/wl.c:746: warning: 'pe' may be used uninitialized in this function
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

$ codiff $OBJ.old $OBJ
drivers/mtd/chips/jedec_probe.c:
  cfi_jedec_setup  | -320
  jedec_probe_chip | -7073
 2 functions changed, 7393 bytes removed, diff: -7393

drivers/mtd/chips/jedec_probe.c:
  jedec_reset | +1151
 1 function changed, 1151 bytes added, diff: +1151

drivers/mtd/chips/jedec_probe.o:
 3 functions changed, 1151 bytes added, 7393 bytes removed, diff: -6242
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits)
  ide-tape: remove idetape_config_t typedef
  ide-tape: remove mtio.h related comments
  ide-tape: make function name more accurate
  ide-tape: remove unused sense packet commands.
  ide-tape: use generic byteorder macros
  ide-tape: remove EXPERIMENTAL driver status
  ide-tape: use generic scsi commands
  ide-tape: remove struct idetape_block_size_page_t
  ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  ide-tape: remove struct idetape_parameter_block_descriptor_t
  ide-tape: remove struct idetape_medium_partition_page_t
  ide-tape: remove struct idetape_data_compression_page_t
  ide-tape: remove struct idetape_inquiry_result_t
  ide-tape: remove struct idetape_capabilities_page_t
  ide-tape: remove IDETAPE_DEBUG_BUGS
  ide-tape: remove IDETAPE_DEBUG_INFO
  ide-tape: dump gcw fields on error in idetape_identify_device()
  ide-tape: remove struct idetape_mode_parameter_header_t
  ide-tape: remove struct idetape_request_sense_result_t
  ide-tape: remove dead code
  ...

Frederik Himpe reported an unkillable and un-straceable pan process.

Zero length iovecs can go into an infinite loop in writev, because the
iovec iterator does not always advance over them.

The sequence required to trigger this is not trivial. I think it
requires that a zero-length iovec be followed by a non-zero-length iovec
which causes a pagefault in the atomic usercopy. This causes the writev
code to drop back into single-segment copy mode, which then tries to
copy the 0 bytes of the zero-length iovec; a zero length copy looks like
a failure though, so it loops.

Put a test into iov_iter_advance to catch zero-length iovecs. We could
just put the test in the fallback path, but I feel it is more robust to
skip over zero-length iovecs throughout the code (iovec iterator may be
used in filesystems too, so it should be robust).
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: fix bogus s/g access change

Since this is used only in idetape_blkdev_ioctl(), remove the typedef and make
the struct function-local.

Bart:
- s/sizeof(struct idetape_config)/sizeof(config)/
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Those are already in mtio.h.

Bart:
- undo 'unsigned int/unsigned long' -> 'uint/ulong' conversion
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

idetape_active_next_stage() was rather ambiguous wrt its purpose. Make that
more explicit and remove superfluous comment.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is not a network driver.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is
being only maintained now.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Also, remove those which weren't used.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

They seem just to sit there completely unused.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Also, shorten function name idetape_get_blocksize_from_block_descriptor() and
move its definition up thereby getting rid of its forward declaration.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes resulting from this patch.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes resulting from this patch.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>