This patch changes mm_struct.dumpable to a pair of bit flags.

set_dumpable() converts three-value dumpable to two flags and stores it into
lower two bits of mm_struct.flags instead of mm_struct.dumpable.
get_dumpable() behaves in the opposite way.

[akpm@linux-foundation.org: export set_dumpable]
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables the unshare of user namespaces.

It adds a new clone flag CLONE_NEWUSER and implements copy_user_ns() which
resets the current user_struct and adds a new root user (uid == 0)

For now, unsharing the user namespace allows a process to reset its
user_struct accounting and uid 0 in the new user namespace should be contained
using appropriate means, for instance selinux

The plan, when the full support is complete (all uid checks covered), is to
keep the original user's rights in the original namespace, and let a process
become uid 0 in the new namespace, with full capabilities to the new
namespace.
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Acked-by: NPavel Emelianov <xemul@openvz.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Andrew Morgan <agm@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Basically, it will allow a process to unshare its user_struct table,
resetting at the same time its own user_struct and all the associated
accounting.

A new root user (uid == 0) is added to the user namespace upon creation.
Such root users have full privileges and it seems that theses privileges
should be controlled through some means (process capabilities ?)

The unshare is not included in this patch.

Changes since [try #4]:
	- Updated get_user_ns and put_user_ns to accept NULL, and
	  get_user_ns to return the namespace.

Changes since [try #3]:
	- moved struct user_namespace to files user_namespace.{c,h}

Changes since [try #2]:
	- removed struct user_namespace* argument from find_user()

Changes since [try #1]:
	- removed struct user_namespace* argument from find_user()
	- added a root_user per user namespace
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Acked-by: NPavel Emelianov <xemul@openvz.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Andrew Morgan <agm@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add TTY input auditing, used to audit system administrator's actions.  This is
required by various security standards such as DCID 6/3 and PCI to provide
non-repudiation of administrator's actions and to allow a review of past
actions if the administrator seems to overstep their duties or if the system
becomes misconfigured for unknown reasons.  These requirements do not make it
necessary to audit TTY output as well.

Compared to an user-space keylogger, this approach records TTY input using the
audit subsystem, correlated with other audit events, and it is completely
transparent to the user-space application (e.g.  the console ioctls still
work).

TTY input auditing works on a higher level than auditing all system calls
within the session, which would produce an overwhelming amount of mostly
useless audit events.

Add an "audit_tty" attribute, inherited across fork ().  Data read from TTYs
by process with the attribute is sent to the audit subsystem by the kernel.
The audit netlink interface is extended to allow modifying the audit_tty
attribute, and to allow sending explanatory audit events from user-space (for
example, a shell might send an event containing the final command, after the
interactive command-line editing and history expansion is performed, which
might be difficult to decipher from the TTY input alone).

Because the "audit_tty" attribute is inherited across fork (), it would be set
e.g.  for sshd restarted within an audited session.  To prevent this, the
audit_tty attribute is cleared when a process with no open TTY file
descriptors (e.g.  after daemon startup) opens a TTY.

See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a
more detailed rationale document for an older version of this patch.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NMiloslav Trmac <mitr@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 411187fb caused boot time to move and
process start times to become invalid after suspend.  Using boot based time
for those restores the old behaviour and fixes the issue.

[akpm@linux-foundation.org: little cleanup]
Signed-off-by: NTomas Janousek <tjanouse@redhat.com>
Cc: Tomas Smetana <tsmetana@redhat.com>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

micro-optimize mmdrop(). Improves schedule()'s assembly a bit.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

scheduler debugging core: implement /proc/sched_debug and
/proc/<PID>/sched files for scheduler debugging.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove the old cpu-accounting field from signal_struct, now
that the code is using CFS's stats.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

batch_task() in sched.h is now unused - remove it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove now-unused types/fields used by the old scheduler.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sched_fork()/sched_exit() does not need to specify fastcall anymore,
as the x86 kernel defaults to regparm3, and no assembly code calls
these functions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

update delay-accounting to use CFS's precise stats.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

track TSC-unstable events and propagate it to the scheduler code.
Also allow sched_clock() to be used when the TSC is unstable,
the rq_clock() wrapper creates a reliable clock out of it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

remove the sleep_type heuristics from the core scheduler - scheduling
policy is implemented in the scheduling-policy modules. (and CFS does
not use this type of sleep-type heuristics)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

clean up the rt priority macros, pointed out by Andrew Morton.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

update the posix-cpu-timers code to use CFS's CPU accounting information.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add the CFS data types to sched.h.

(the old scheduler is still fully intact.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add kernel/sched_fair.c - which implements the bulk of CFS's
behavioral changes for SCHED_OTHER tasks.

see Documentation/sched-design-CFS.txt about details.

Authors:

 Ingo Molnar <mingo@elte.hu>
 Dmitry Adamushko <dmitry.adamushko@gmail.com>
 Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
 Mike Galbraith <efault@gmx.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>

increase SMP-nice's resolution. This is needed by CFS to
implement SCHED_IDLE and cleaned up nice level support.

no behavioral changes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add the init_idle_bootup_task() callback to the bootup thread,
unused at the moment. (CFS will use it to switch the scheduling
class of the boot thread to the idle class)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

uninline set_task_cpu(): CFS will add more code to it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the SMP load-balancer uses the boot-time migration-cost estimation
code to attempt to improve the quality of balancing. The reason for
this code is that the discrete priority queues do not preserve
the order of scheduling accurately, so the load-balancer skips
tasks that were running on a CPU 'recently'.

this code is fundamental fragile: the boot-time migration cost detector
doesnt really work on systems that had large L3 caches, it caused boot
delays on large systems and the whole cache-hot concept made the
balancing code pretty undeterministic as well.

(and hey, i wrote most of it, so i can say it out loud that it sucks ;-)

under CFS the same purpose of cache affinity can be achieved without
any special cache-hot special-case: tasks are sorted in the 'timeline'
tree and the SMP balancer picks tasks from the left side of the
tree, thus the most cache-cold task is balanced automatically.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this patch adds the SCHED_IDLE policy to sched.h.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

enum idle_type (used by the load-balancer) clashes with the
SCHED_IDLE name that we want to introduce. 'CPU_IDLE' instead
of 'SCHED_IDLE' is more descriptive as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

1. New entries can be added to tsk->pi_state_list after task completed
   exit_pi_state_list(). The result is memory leakage and deadlocks.

2. handle_mm_fault() is called under spinlock. The result is obvious.

3. results in self-inflicted deadlock inside glibc.
   Sometimes futex_lock_pi returns -ESRCH, when it is not expected
   and glibc enters to for(;;) sleep() to simulate deadlock. This problem
   is quite obvious and I think the patch is right. Though it looks like
   each "if" in futex_lock_pi() got some stupid special case "else if". :-)

4. sometimes futex_lock_pi() returns -EDEADLK,
   when nobody has the lock. The reason is also obvious (see comment
   in the patch), but correct fix is far beyond my comprehension.
   I guess someone already saw this, the chunk:

                        if (rt_mutex_trylock(&q.pi_state->pi_mutex))
                                ret = 0;

   is obviously from the same opera. But it does not work, because the
   rtmutex is really taken at this point: wake_futex_pi() of previous
   owner reassigned it to us. My fix works. But it looks very stupid.
   I would think about removal of shift of ownership in wake_futex_pi()
   and making all the work in context of process taking lock.

From: Thomas Gleixner <tglx@linutronix.de>

Fix 1) Avoid the tasklist lock variant of the exit race fix by adding
    an additional state transition to the exit code.

    This fixes also the issue, when a task with recursive segfaults
    is not able to release the futexes.

Fix 2) Cleanup the lookup_pi_state() failure path and solve the -ESRCH
    problem finally.

Fix 3) Solve the fixup_pi_state_owner() problem which needs to do the fixup
    in the lock protected section by using the in_atomic userspace access
    functions.

    This removes also the ugly lock drop / unqueue inside of fixup_pi_state()

Fix 4) Fix a stale lock in the error path of futex_wake_pi()

Added some error checks for verification.

The -EDEADLK problem is solved by the rtmutex fixups.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Steve Hawkes discovered a problem where recalc_sigpending_tsk was called in
do_sigaction but no signal_wake_up call was made, preventing later signals
from waking up blocked threads with TIF_SIGPENDING already set.

In fact, the few other calls to recalc_sigpending_tsk outside the signals
code are also subject to this problem in other race conditions.

This change makes recalc_sigpending_tsk private to the signals code.  It
changes the outside calls, as well as do_sigaction, to use the new
recalc_sigpending_and_wake instead.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: <Steve.Hawkes@motorola.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently try_to_freeze_tasks() has to wait until all of the vforked processes
exit and for this reason every user can make it fail.  To fix this problem we
can introduce the additional process flag PF_FREEZER_SKIP to be used by tasks
that do not want to be counted as freezable by the freezer and want to have
TIF_FREEZE set nevertheless.  Then, this flag can be set by tasks using
sys_vfork() before they call wait_for_completion(&vfork) and cleared after
they have woken up.  After clearing it, the tasks should call try_to_freeze()
as soon as possible.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch series implements the new signalfd() system call.

I took part of the original Linus code (and you know how badly it can be
broken :), and I added even more breakage ;) Signals are fetched from the same
signal queue used by the process, so signalfd will compete with standard
kernel delivery in dequeue_signal().  If you want to reliably fetch signals on
the signalfd file, you need to block them with sigprocmask(SIG_BLOCK).  This
seems to be working fine on my Dual Opteron machine.  I made a quick test
program for it:

http://www.xmailserver.org/signafd-test.c

The signalfd() system call implements signal delivery into a file descriptor
receiver.  The signalfd file descriptor if created with the following API:

int signalfd(int ufd, const sigset_t *mask, size_t masksize);

The "ufd" parameter allows to change an existing signalfd sigmask, w/out going
to close/create cycle (Linus idea).  Use "ufd" == -1 if you want a brand new
signalfd file.

The "mask" allows to specify the signal mask of signals that we are interested
in.  The "masksize" parameter is the size of "mask".

The signalfd fd supports the poll(2) and read(2) system calls.  The poll(2)
will return POLLIN when signals are available to be dequeued.  As a direct
consequence of supporting the Linux poll subsystem, the signalfd fd can use
used together with epoll(2) too.

The read(2) system call will return a "struct signalfd_siginfo" structure in
the userspace supplied buffer.  The return value is the number of bytes copied
in the supplied buffer, or -1 in case of error.  The read(2) call can also
return 0, in case the sighand structure to which the signalfd was attached,
has been orphaned.  The O_NONBLOCK flag is also supported, and read(2) will
return -EAGAIN in case no signal is available.

If the size of the buffer passed to read(2) is lower than sizeof(struct
signalfd_siginfo), -EINVAL is returned.  A read from the signalfd can also
return -ERESTARTSYS in case a signal hits the process.  The format of the
struct signalfd_siginfo is, and the valid fields depends of the (->code &
__SI_MASK) value, in the same way a struct siginfo would:

struct signalfd_siginfo {
	__u32 signo;	/* si_signo */
	__s32 err;	/* si_errno */
	__s32 code;	/* si_code */
	__u32 pid;	/* si_pid */
	__u32 uid;	/* si_uid */
	__s32 fd;	/* si_fd */
	__u32 tid;	/* si_fd */
	__u32 band;	/* si_band */
	__u32 overrun;	/* si_overrun */
	__u32 trapno;	/* si_trapno */
	__s32 status;	/* si_status */
	__s32 svint;	/* si_int */
	__u64 svptr;	/* si_ptr */
	__u64 utime;	/* si_utime */
	__u64 stime;	/* si_stime */
	__u64 addr;	/* si_addr */
};

[akpm@linux-foundation.org: fix signalfd_copyinfo() on i386]
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_TASK_IO_ACCOUNTING is defined, we update io accounting counters for
each task.

This patch permits reporting of values using the well known getrusage()
syscall, filling ru_inblock and ru_oublock instead of null values.

As TASK_IO_ACCOUNTING currently counts bytes counts, we approximate blocks
count doing : nr_blocks = nr_bytes / 512

Example of use :
----------------------
After patch is applied, /usr/bin/time command can now give a good
approximation of IO that the process had to do.

$ /usr/bin/time grep tototo /usr/include/*
Command exited with non-zero status 1
0.00user 0.02system 0:02.11elapsed 1%CPU (0avgtext+0avgdata 0maxresident)k
24288inputs+0outputs (0major+259minor)pagefaults 0swaps

$ /usr/bin/time dd if=/dev/zero of=/tmp/testfile count=1000
1000+0 enregistrements lus
1000+0 enregistrements écrits
512000 octets (512 kB) copiés, 0,00326601 seconde, 157 MB/s
0.00user 0.00system 0:00.00elapsed 80%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+3000outputs (0major+299minor)pagefaults 0swaps
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

to generic_make_request can use up a lot of space, and we would rather they
didn't.

As generic_make_request is a void function, and as it is generally not
expected that it will have any effect immediately, it is safe to delay any
call to generic_make_request until there is sufficient stack space
available.

As ->bi_next is reserved for the driver to use, it can have no valid value
when generic_make_request is called, and as __make_request implicitly
assumes it will be NULL (ELEVATOR_BACK_MERGE fork of switch) we can be
certain that all callers set it to NULL.  We can therefore safely use
bi_next to link pending requests together, providing we clear it before
making the real call.

So, we choose to allow each thread to only be active in one
generic_make_request at a time.  If a subsequent (recursive) call is made,
the bio is linked into a per-thread list, and is handled when the active
call completes.

As the list of pending bios is per-thread, there are no locking issues to
worry about.

I say above that it is "safe to delay any call...".  There are, however,
some behaviours of a make_request_fn which would make it unsafe.  These
include any behaviour that assumes anything will have changed after a
recursive call to generic_make_request.

These could include:
 - waiting for that call to finish and call it's bi_end_io function.
   md use to sometimes do this (marking the superblock dirty before
   completing a write) but doesn't any more
 - inspecting the bio for fields that generic_make_request might
   change, such as bi_sector or bi_bdev.  It is hard to see a good
   reason for this, and I don't think anyone actually does it.
 - inspecing the queue to see if, e.g. it is 'full' yet.  Again, I
   think this is very unlikely to be useful, or to be done.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <dm-devel@redhat.com>

Alasdair G Kergon <agk@redhat.com> said:

 I can see nothing wrong with this in principle.

 For device-mapper at the moment though it's essential that, while the bio
 mappings may now get delayed, they still get processed in exactly
 the same order as they were passed to generic_make_request().

 My main concern is whether the timing changes implicit in this patch
 will make the rare data-corrupting races in the existing snapshot code
 more likely. (I'm working on a fix for these races, but the unfinished
 patch is already several hundred lines long.)

 It would be helpful if some people on this mailing list would test
 this patch in various scenarios and report back.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This finally renames the thread_info field in task structure to stack, so that
the assumptions about this field are gone and archs have more freedom about
placing the thread_info structure.

Nonbroken archs which have a proper thread pointer can do the access to both
current thread and task structure via a single pointer.

It'll allow for a few more cleanups of the fork code, from which e.g.  ia64
could benefit.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
[akpm@linux-foundation.org: build fix]
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Andi Kleen <ak@muc.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently kernel threads use sigprocmask(SIG_BLOCK) to protect against
signals.  This doesn't prevent the signal delivery, this only blocks
signal_wake_up().  Every "killall -33 kthreadd" means a "struct siginfo"
leak.

Change kthreadd_setup() to set all handlers to SIG_IGN instead of blocking
them (make a new helper ignore_signals() for that).  If the kernel thread
needs some signal, it should use allow_signal() anyway, and in that case it
should not use CLONE_SIGHAND.

Note that we can't change daemonize() (should die!) in the same way,
because it can be used along with CLONE_SIGHAND.  This means that
allow_signal() still should unblock the signal to work correctly with
daemonize()ed threads.

However, disallow_signal() doesn't block the signal any longer but ignores
it.

NOTE: with or without this patch the kernel threads are not protected from
handle_stop_signal(), this seems harmless, but not good.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I noticed expensive divides done in try_to_wakeup() and
find_busiest_group() on a bi dual core Opteron machine (total of 4 cores),
moderatly loaded (15.000 context switch per second)

oprofile numbers :

CPU: AMD64 processors, speed 2600.05 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Cycles outside of halt state) with a unit
mask of 0x00 (No unit mask) count 50000
samples  %        symbol name
...
613914    1.0498  try_to_wake_up
    834  0.0013 :ffffffff80227ae1:   div    %rcx
77513  0.1191 :ffffffff80227ae4:   mov    %rax,%r11

608893    1.0413  find_busiest_group
   1841  0.0031 :ffffffff802260bf:       div    %rdi
140109  0.2394 :ffffffff802260c2:       test   %sil,%sil

Some of these divides can use the reciprocal divides we introduced some
time ago (currently used in slab AFAIK)

We can assume a load will fit in a 32bits number, because with a
SCHED_LOAD_SCALE=128 value, its still a theorical limit of 33554432

When/if we reach this limit one day, probably cpus will have a fast
hardware divide and we can zap the reciprocal divide trick.

Ingo suggested to rename cpu_power to __cpu_power to make clear it should
not be modified without changing its reciprocal value too.

I did not convert the divide in cpu_avg_load_per_task(), because tracking
nr_running changes may be not worth it ?  We could use a static table of 32
reciprocal values but it would add a conditional branch and table lookup.

[akpm@linux-foundation.org: !SMP build fix]
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the process idle load balancing in the presence of dynticks.  cpus for
which ticks are stopped will sleep till the next event wakes it up.
Potentially these sleeps can be for large durations and during which today,
there is no periodic idle load balancing being done.

This patch nominates an owner among the idle cpus, which does the idle load
balancing on behalf of the other idle cpus.  And once all the cpus are
completely idle, then we can stop this idle load balancing too.  Checks added
in fast path are minimized.  Whenever there are busy cpus in the system, there
will be an owner(idle cpu) doing the system wide idle load balancing.

Open items:
1. Intelligent owner selection (like an idle core in a busy package).
2. Merge with rcu's nohz_cpu_mask?
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add touch_all_softlockup_watchdogs() to allow the softlockup watchdog
timers on all cpus to be updated.  This is used to prevent sysrq-t from
generating a spurious watchdog message when generating lots of output.

Softlockup watchdogs use sched_clock() as its timebase, which is inherently
per-cpu (at least, when it is measuring unstolen time).  Because of this,
it isn't possible for one CPU to directly update the other CPU's timers,
but it is possible to tell the other CPUs to do update themselves
appropriately.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: NChris Lalancette <clalance@redhat.com>
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Rick Lindsley <ricklind@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sysdev.h uses THIS_MODULE so should include <linux/module.h>.

[akpm@linux-foundation.org: couple of fixes]
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This past week I was playing around with that pahole tool
(http://oops.ghostprotocols.net:81/acme/dwarves/) and looking at the size
of various struct in the kernel.  I was surprised by the size of the
task_struct on x86_64, approaching 4K.  I looked through the fields in
task_struct and found that a number of them were declared as "unsigned
long" rather than "unsigned int" despite them appearing okay as 32-bit
sized fields.  On x86_64 "unsigned long" ends up being 8 bytes in size and
forces 8 byte alignment.  Is there a reason there a reason they are
"unsigned long"?

The patch below drops the size of the struct from 3808 bytes (60 64-byte
cachelines) to 3760 bytes (59 64-byte cachelines).  A couple other fields
in the task struct take a signficant amount of space:

struct thread_struct       thread;               688
struct held_lock           held_locks[30];       1680

CONFIG_LOCKDEP is turned on in the .config

[akpm@linux-foundation.org: fix printk warnings]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

show_state() (SysRq-T) developed the buggy habbit of not showing
TASK_RUNNING tasks.  This was due to the mistaken belief that state_filter
== -1 would be a pass-through filter - while in reality it did not let
TASK_RUNNING == 0 p->state values through.

Fix this by restoring the original '!state_filter means all tasks'
special-case i had in the original version.  Test-built and test-booted on
i686, SysRq-T now works as intended.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the SMT-nice feature which idles sibling cpus on SMT cpus to
facilitiate nice working properly where cpu power is shared.  The idling of
cpus in the presence of runnable tasks is considered too fragile, easy to
break with outside code, and the complexity of managing this system if an
architecture comes along with many logical cores sharing cpu power will be
unworkable.

Remove the associated per_cpu_gain variable in sched_domains used only by
this code.

Also:

  The reason is that with dynticks enabled, this code breaks without yet
  further tweaks so dynticks brought on the rapid demise of this code.  So
  either we tweak this code or kill it off entirely.  It was Ingo's preference
  to kill it off.  Either way this needs to happen for 2.6.21 since dynticks
  has gone in.
Signed-off-by: NCon Kolivas <kernel@kolivas.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit d3228a88.
DeBunk this code.  We need it for compat_sys_rt_sigqueueinfo.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>