- 21 3月, 2013 6 次提交
-
-
由 Claudiu Manoil 提交于
Split the napi budget fairly among the active queues only, instead of dividing it by the total number of Rx queues assigned to the given interrupt group. Use the h/w indication field RXFi in rstat (receive status register) to identify the active rx queues from the current interrupt group (i.e. receive event occured on ring i, if ring i is part of the current interrupt group). This indication field in rstat, RXFi i=0..7, allows us to find out on which queues of the same interrupt group do we have incomming traffic once we entered the polling routine for the given interrupt group. After servicing the ring i, the corresponding bit RXFi will be written with 1 to clear the active queue indication for that ring. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
There are 2 issues with the current napi poll routine, with regards to tx ring cleanup: 1) for multi-queue devices (MQ_MG_MODE), should tx_bit_map != rx_bit_map, which is possible (and supported in h/w) if the DT property "fsl,tx-bit-map" holds a different value than rx_bit_map, the current polling routine will service the wrong Tx queues in this case (i.e. the interrupt group will receive interrupts from tx queues that it will not service) 2) Tx cleanup completion consumes napi budget, whereas the napi budget should be reserved for Rx work only. The patch fixes these issues and provides a clean napi polling routine. Napi poll completion is reached when all the Rx queues have been serviced and there is no Tx work to do. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
Fix the following warnings that happen when building with W=1 option: drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers': drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers': drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init': drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2013 8 次提交
-
-
由 Sachin Kamat 提交于
Silences the following sparse warning: drivers/net/ethernet/smsc/smsc911x.c:2145:30: warning: Using plain integer as NULL pointer Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704 "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: NMaciej Żenczykowski <maze@google.com> Cc: Mintz Yuval <yuvalmin@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
The patch drives FW to perform RSS for GRE traffic, based on inner headers. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
The patch utilizes FW offload capabilities for encapsulation protocols. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2013 5 次提交
-
-
由 stephen hemminger 提交于
Trivial sparse detected functions that should be static. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
If the hardware initialization fails in bnx2x_nic_load() after adding napi objects, they would not be deleted. A subsequent attempt to unload the bnx2x module detects a corruption in the napi list. Add the missing napi deletion to the error path. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Fix which was done in the following commit in cpsw driver has to be taken forward to davinci emac driver as well. commit d35162f8 Author: Daniel Mack <zonque@gmail.com> Date: Tue Mar 12 06:31:19 2013 +0000 net: ethernet: cpsw: fix usage of cpdma_check_free_tx_desc() Commit fae50823 ("net: ethernet: davinci_cpdma: Add boundary for rx and tx descriptors") introduced a function to check the current allocation state of tx packets. The return value is taken into account to stop the netqork queue on the adapter in case there are no free slots. However, cpdma_check_free_tx_desc() returns 'true' if there is room in the bitmap, not 'false', so the usage of the function is wrong. Reported-by: NPrabhakar Lad <prabhakar.csengg@gmail.com> Tested-by: NPrabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The automated ARM build tests have shown that the tulip de4x5 driver uses the old-style virt_to_bus() interface on some architectures. Alpha, Sparc and PowerPC did not hit this problem, because they use a different code path, and most other architectures actually do provide VIRT_TO_BUS. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2013 7 次提交
-
-
由 Li RongQing 提交于
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Somnath Kotur 提交于
This is needed as the earlier method of manipulating this register via PCI Config space is disallowed by certain Hypervisors. Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Somnath Kotur 提交于
As the NIC PCI function may be used by other protocols, the chip interrupts must be enabled in be_probe() itself rather than be_open(). Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Georg Hofmann 提交于
Commit dc975382 introduces napi support but never calls napi_disable. This will generate a kernel oops (kernel BUG at include/linux/netdevice.h:473!) every time, when ndo_stop is called followed by ndo_start. Add the missing napi_diable call. Signed-off-by: NGeorg Hofmann <georg@hofmannsweb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lucas Stach 提交于
Proviously we would only restart the FEC when PHY link or duplex state changed. PHY does not always bring down the link for speed changes, in which case we would not detect any change and keep FEC running. Switching link speed without restarting the FEC results in the FEC being stuck in an indefinite state, generating error conditions for every packet. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 nikolay@redhat.com 提交于
This patch allows LRO aggregation on bonded devices that contain an NX3031 device. It also adds a for_each_netdev_in_bond_rcu(bond, slave) macro which executes for each slave that has bond as master. V3: After testing and discussing this with Rajesh, I decided to keep the vlan ip cache and just rename it to ip_cache since it will store bond ip addresses too. A new master flag has been added to the ip cache to denote that the address has been added because of a master device. I've taken care of the enslave/release cases by checking for various combinations of events and flags (e.g. netxen has a master, it's a bond master and it's not marked as a slave means it is being enslaved and is dev_open()ed in bond_enslave). I've changed netxen_free_ip_list() to have a "master" parameter which causes all IP addresses marked as master to be deleted (used when a netxen is being released). I've made the patch use the new upper device API as well. The following cases were tested: - bond -> netxen - vlan -> netxen - vlan -> bond -> netxen V2: Remove local ip caching, retrieve addresses dynamically and restore them if necessary. Note: Tested with NX3031 adapter. Tested-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAndy Gospodarek <agospoda@redhat.com> Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2013 13 次提交
-
-
由 Vipul Pandya 提交于
It enables direct DMA by HW to memory region PBL arrays and fast register PBL arrays from host memory, vs the T4 way of passing these arrays in the WR itself. The result is lower latency for memory registration, and larger PBL array support for fast register operations. This patch also updates ULP_TX_MEM_WRITE command fields for T5. Ordering bit of ULP_TX_MEM_WRITE is at bit position 22 in T5 and at 23 in T4. Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vipul Pandya 提交于
Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
All T5 adapters will only support VFs on PF0-3 despite the ability of the hardware to support them on PF4-7. This keeps our T4 and T5 adapters more similar which simplifies host driver software. Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
This patch implements a low latency Write Combining (aka Write Coalescing) work request path. PCIE maps User Space Doorbell BAR2 region writes to the new interface to SGE. SGE pulls a new message from PCIE new interface and if its a coalesced write work request then pushes it for processing. This patch copies coalesced work request to memory mapped BAR2 space. Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santosh Rastapur 提交于
Signed-off-by: NSantosh Rastapur <santosh@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2013 1 次提交
-
-
由 Wei Yongjun 提交于
Remove duplicated include. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-