Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 19 6月, 2015 1 次提交
  3. 07 6月, 2015 3 次提交
    • Y
      perf/x86/intel: Drain the PEBS buffer during context switches · 9c964efa
      由 Yan, Zheng 提交于 
      Flush the PEBS buffer during context switches if PEBS interrupt threshold
is larger than one. This allows perf to supply TID for sample outputs.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-6-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      9c964efa
    • Y
      perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) · 3569c0d7
      由 Yan, Zheng 提交于 
      PEBS always had the capability to log samples to its buffers without
an interrupt. Traditionally perf has not used this but always set the
PEBS threshold to one.

For frequently occurring events (like cycles or branches or load/store)
this in term requires using a relatively high sampling period to avoid
overloading the system, by only processing PMIs. This in term increases
sampling error.

For the common cases we still need to use the PMI because the PEBS
hardware has various limitations. The biggest one is that it can not
supply a callgraph. It also requires setting a fixed period, as the
hardware does not support adaptive period. Another issue is that it
cannot supply a time stamp and some other options. To supply a TID it
requires flushing on context switch. It can however supply the IP, the
load/store address, TSX information, registers, and some other things.

So we can make PEBS work for some specific cases, basically as long as
you can do without a callgraph and can set the period you can use this
new PEBS mode.

The main benefit is the ability to support much lower sampling period
(down to -c 1000) without extensive overhead.

One use cases is for example to increase the resolution of the c2c tool.
Another is double checking when you suspect the standard sampling has
too much sampling error.

Some numbers on the overhead, using cycle soak, comparing the elapsed
time from "kernbench -M -H" between plain (threshold set to one) and
multi (large threshold).

The test command for plain:
  "perf record --time -e cycles:p -c $period -- kernbench -M -H"

The test command for multi:
  "perf record --no-time -e cycles:p -c $period -- kernbench -M -H"

( The only difference of test command between multi and plain is time
  stamp options. Since time stamp is not supported by large PEBS
  threshold, it can be used as a flag to indicate if large threshold is
  enabled during the test. )

	period    plain(Sec)  multi(Sec)  Delta
	10003     32.7        16.5        16.2
	20003     30.2        16.2        14.0
	40003     18.6        14.1        4.5
	80003     16.8        14.6        2.2
	100003    16.9        14.1        2.8
	800003    15.4        15.7        -0.3
	1000003   15.3        15.2        0.2
	2000003   15.3        15.1        0.1

With periods below 100003, plain (threshold one) cause much more
overhead. With 10003 sampling period, the Elapsed Time for multi is
even 2X faster than plain.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      3569c0d7
    • Y
      perf/x86/intel: Use the PEBS auto reload mechanism when possible · 851559e3
      由 Yan, Zheng 提交于 
      When a fixed period is specified, this patch makes perf use the PEBS
auto reload mechanism. This makes normal profiling faster, because
it avoids one costly MSR write in the PMI handler.

However, the reset value will be loaded by hardware assist. There is a
small delay compared to the previous non-auto-reload mechanism. The
delay time is arbitrary, but very small. The assist cost is 400-800
cycles, assuming common cases with everything cached. The minimum period
the patch currently uses is 10000. In that extreme case it can be ~10%
if cycles are used.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-2-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      851559e3
  5. 27 5月, 2015 4 次提交
    • P
      perf/x86/intel: Remove intel_excl_states::init_state · 43ef205b
      由 Peter Zijlstra 提交于 
      For some obscure reason intel_{start,stop}_scheduling() copy the HT
state to an intermediate array. This would make sense if we ever were
to make changes to it which we'd have to discard.

Except we don't. By the time we call intel_commit_scheduling() we're;
as the name implies; committed to them. We'll never back out.

A further hint its pointless is that stop_scheduling() unconditionally
publishes the state.

So the intermediate array is pointless, modify the state in place and
kill the extra array.

And remove the pointless array initialization: INTEL_EXCL_UNUSED == 0.

Note; all is serialized by intel_excl_cntr::lock.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      43ef205b
    • P
      perf/x86/intel: Clean up intel_commit_scheduling() placement · 0c41e756
      由 Peter Zijlstra 提交于 
      Move the code of intel_commit_scheduling() to the right place, which is
in between start() and stop().

No change in functionality.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      0c41e756
    • P
      perf/x86: Improve HT workaround GP counter constraint · cc1790cf
      由 Peter Zijlstra 提交于 
      The (SNB/IVB/HSW) HT bug only affects events that can be programmed
onto GP counters, therefore we should only limit the number of GP
counters that can be used per cpu -- iow we should not constrain the
FP counters.

Furthermore, we should only enfore such a limit when there are in fact
exclusive events being scheduled on either sibling.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ Fixed build fail for the !CONFIG_CPU_SUP_INTEL case. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      cc1790cf
    • P
      perf/x86: Fix event/group validation · b371b594
      由 Peter Zijlstra 提交于 
      Commit 43b45780 ("perf/x86: Reduce stack usage of
x86_schedule_events()") violated the rule that 'fake' scheduling; as
used for event/group validation; should not change the event state.

This went mostly un-noticed because repeated calls of
x86_pmu::get_event_constraints() would give the same result. And
x86_pmu::put_event_constraints() would mostly not do anything.

Commit e979121b ("perf/x86/intel: Implement cross-HT corruption
bug workaround") made the situation much worse by actually setting the
event->hw.constraint value to NULL, so when validation and actual
scheduling interact we get NULL ptr derefs.

Fix it by removing the constraint pointer from the event and move it
back to an array, this time in cpuc instead of on the stack.

validate_group()
  x86_schedule_events()
    event->hw.constraint = c; # store

      <context switch>
        perf_task_event_sched_in()
          ...
            x86_schedule_events();
              event->hw.constraint = c2; # store

              ...

              put_event_constraints(event); # assume failure to schedule
                intel_put_event_constraints()
                  event->hw.constraint = NULL;

      <context switch end>

    c = event->hw.constraint; # read -> NULL

    if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref

This in particular is possible when the event in question is a
cpu-wide event and group-leader, where the validate_group() tries to
add an event to the group.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43b45780 ("perf/x86: Reduce stack usage of x86_schedule_events()")
Fixes: e979121b ("perf/x86/intel: Implement cross-HT corruption bug workaround")
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      b371b594
  7. 17 4月, 2015 1 次提交
  9. 02 4月, 2015 13 次提交
  11. 27 3月, 2015 1 次提交
    • A
      perf/x86/intel: Add INST_RETIRED.ALL workarounds · 294fe0f5
      由 Andi Kleen 提交于 
      On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.

This is erratum BDM11 and BDM55:

  http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/5th-gen-core-family-spec-update.pdf

BDM11: When using a period < 100; we may get incorrect PEBS/PMI
interrupts and/or an invalid counter state.
BDM55: When bit0-5 of the period are !0 we may get redundant PEBS
records on overflow.

Add a new callback to enforce this, and set it for Broadwell.

How does this handle the case when an app requests a specific
period with some of the bottom bits set?

Short answer:

Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.

Long answer (by Peterz):

IFF we guarantee perf_event_attr::sample_period >= 128.

Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.

So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.

So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.

So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
[ Updated comments and changelog a bit. ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-3-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      294fe0f5
  13. 19 2月, 2015 6 次提交
  15. 04 2月, 2015 1 次提交
    • A
      perf/x86: Only allow rdpmc if a perf_event is mapped · 7911d3f7
      由 Andy Lutomirski 提交于 
      We currently allow any process to use rdpmc.  This significantly
weakens the protection offered by PR_TSC_DISABLED, and it could be
helpful to users attempting to exploit timing attacks.

Since we can't enable access to individual counters, use a very
coarse heuristic to limit access to rdpmc: allow access only when
a perf_event is mmapped.  This protects seccomp sandboxes.

There is plenty of room to further tighen these restrictions.  For
example, this allows rdpmc for any x86_pmu event, but it's only
useful for self-monitoring tasks.

As a side effect, cap_user_rdpmc will now be false for AMD uncore
events.  This isn't a real regression, since .event_idx is disabled
for these events anyway for the time being.  Whenever that gets
re-added, the cap_user_rdpmc code can be adjusted or refactored
accordingly.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Vince Weaver <vince@deater.net>
Cc: "hillf.zj" <hillf.zj@alibaba-inc.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/a2bdb3cf3a1d70c26980d7c6dddfbaa69f3182bf.1414190806.git.luto@amacapital.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7911d3f7
  17. 16 11月, 2014 1 次提交
  19. 29 10月, 2014 1 次提交
    • I
      perf/x86/intel: Revert incomplete and undocumented Broadwell client support · 1776b106
      由 Ingo Molnar 提交于 
      These patches:

  86a349a2 ("perf/x86/intel: Add Broadwell core support")
  c46e665f ("perf/x86: Add INST_RETIRED.ALL workarounds")
  fdda3c4a ("perf/x86/intel: Use Broadwell cache event list for Haswell")

introduced magic constants and unexplained changes:

  https://lkml.org/lkml/2014/10/28/1128
  https://lkml.org/lkml/2014/10/27/325
  https://lkml.org/lkml/2014/8/27/546
  https://lkml.org/lkml/2014/10/28/546

Peter Zijlstra has attempted to help out, to clean up the mess:

  https://lkml.org/lkml/2014/10/28/543

But has not received helpful and constructive replies which makes
me doubt wether it can all be finished in time until v3.18 is
released.

Despite various review feedback the author (Andi Kleen) has answered
only few of the review questions and has generally been uncooperative,
only giving replies when prompted repeatedly, and only giving minimal
answers instead of constructively explaining and helping along the effort.

That kind of behavior is not acceptable.

There's also a boot crash on Intel E5-1630 v3 CPUs reported for another
commit from Andi Kleen:

  e735b9db ("perf/x86/intel/uncore: Add Haswell-EP uncore support")

  https://lkml.org/lkml/2014/10/22/730

Which is not yet resolved. The uncore driver is independent in theory,
but the crash makes me worry about how well all these patches were
tested and makes me uneasy about the level of interminging that the
Broadwell and Haswell code has received by the commits above.

As a first step to resolve the mess revert the Broadwell client commits
back to the v3.17 version, before we run out of time and problematic
code hits a stable upstream kernel.

( If the Haswell-EP crash is not resolved via a simple fix then we'll have
  to revert the Haswell-EP uncore driver as well. )

The Broadwell client series has to be submitted in a clean fashion, with
single, well documented changes per patch. If they are submitted in time
and are accepted during review then they can possibly go into v3.19 but
will need additional scrutiny due to the rocky history of this patch set.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1776b106
  21. 24 9月, 2014 1 次提交
    • A
      perf/x86: Add INST_RETIRED.ALL workarounds · c46e665f
      由 Andi Kleen 提交于 
      On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.

Add a new callback to enforce this, and set it for Broadwell.

This is erratum BDM57 and BDM11.

How does this handle the case when an app requests a specific
period with some of the bottom bits set

The apps thinks it is sampling at X occurences per sample, when it is
in fact at X - 63 (worst case).

Short answer:

Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.

Long answer:

<write up by Peter:>

IFF we guarantee perf_event_attr::sample_period >= 128.

Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.

So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.

So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.

So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1409683455-29168-4-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c46e665f
  23. 13 8月, 2014 1 次提交
    • A
      perf/x86: Revamp PEBS event selection · 86a04461
      由 Andi Kleen 提交于 
      The basic idea is that it does not make sense to list all PEBS
events individually. The list is very long, sometimes outdated
and the hardware doesn't need it. If an event does not support
PEBS it will just not count, there is no security issue.

We need to only list events that something special, like
supporting load or store addresses.

This vastly simplifies the PEBS event selection. It also
speeds up the scheduling because the scheduler doesn't
have to walk as many constraints.

Bugs fixed:

 - We do not allow setting forbidden flags with PEBS anymore
   (SDM 18.9.4), except for the special cycle event.
   This is done using a new constraint macro that also
   matches on the event flags.

 - Correct DataLA and load/store/na flags reporting on Haswell
   [Requires a followon patch]

 - We did not allow all PEBS events on Haswell:
   We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*,
   MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*)

This includes the changes proposed by Stephane earlier and obsoletes
his patchkit (except for some changes on pre Sandy Bridge/Silvermont
CPUs)

I only did Sandy Bridge and Silvermont and later so far, mostly because these
are the parts I could directly confirm the hardware behavior with hardware
architects. Also I do not believe the older CPUs have any
missing events in their PEBS list, so there's no pressing
need to change them.

I did not implement the flag proposed by Peter to allow
setting forbidden flags. If really needed this could
be implemented on to of this patch.

v2: Fix broken store events on SNB/IVB (Stephane Eranian)
v3: More fixes. Rename some arguments (Stephane Eranian)
v4: List most Haswell events individually again to report
memory operation type correctly.
Add new flags to describe load/store/na for datala.
Update description.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      86a04461
  25. 16 7月, 2014 1 次提交
    • K
      perf/x86/intel: Protect LBR and extra_regs against KVM lying · 338b522c
      由 Kan Liang 提交于 
      With -cpu host, KVM reports LBR and extra_regs support, if the host has
support.

When the guest perf driver tries to access LBR or extra_regs MSR,
it #GPs all MSR accesses,since KVM doesn't handle LBR and extra_regs support.
So check the related MSRs access right once at initialization time to avoid
the error access at runtime.

For reproducing the issue, please build the kernel with CONFIG_KVM_INTEL = y
(for host kernel).
And CONFIG_PARAVIRT = n and CONFIG_KVM_GUEST = n (for guest kernel).
Start the guest with -cpu host.
Run perf record with --branch-any or --branch-filter in guest to trigger LBR
Run perf stat offcore events (E.g. LLC-loads/LLC-load-misses ...) in guest to
trigger offcore_rsp #GP
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1405365957-20202-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      338b522c
  27. 27 2月, 2014 1 次提交
  29. 09 2月, 2014 1 次提交
  31. 05 12月, 2013 1 次提交
  33. 04 10月, 2013 1 次提交
  35. 13 9月, 2013 1 次提交