- 11 5月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Fix SPDIF output (at least on Realtek codecs). The DIGI_CONVERT verbs have to be reset before the PCM stream is set up. Otherwise the digital setup is screwed up. Also, check the AMP capability before setting AMP of the digital out widget. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 09 2月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
Use snd_pci_quirk_lookup() for looking up a board config table. The config table is sorted in numerical order of PCI SSIDs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 03 1月, 2006 4 次提交
-
-
由 Kailang Yang 提交于
Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver Remove xxx_t typedefs from the HD-Audio codec support codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver Fix the auto-assignment of speaker pin. Handle it independently from line-out pins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver,HDA generic driver Add common channel-mode helper functions for all codec patches. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver Replace kcalloc(1,..) with kzalloc(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 8月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
HDA Codec driver Added the default config for ASUS P5AD2. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2005 1 次提交
-
-
由 Nicolas Graziano 提交于
HDA Codec driver - Correct some index variable inversion in patch_cmedia.c Signed-off-by: NNicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2005 1 次提交
-
-
由 Takashi Iwai 提交于
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 5月, 2005 3 次提交
-
-
由 Takashi Iwai 提交于
HDA Codec driver Fix and cleanup of CM9880 automatic PIN configuration. snd_hda_codec_setup_stream() doesn't do anything when NID is 0. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Patch by C.L. Tien <cltien@cmedia.com.tw>: The patch makes cm9880 to choose multi-channel jacks automatically. 1. I found the current code has basic_init, which already includes necessary controls for 6-stack initialization, so I don't need another model. 2. I add a new model 'auto' to let the driver find a. if there are option real panel/front panel, b. the jacks to be used for multichannel. Because the jack color are based on MS's channel sequence, so the 'auto' model will pick the same jacks for multichannel MS uses. I did this to hope to minimize users questions. These code can also be applied to other codecs but I don't have any to test. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 ChenLi Tien 提交于
HDA Codec driver The patch_cm9880.c can't play side/C/B channels from front panel jacks. I fixed it by adding select pin. Signed-off-by: NChenLi Tien <cltien@cmedia.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-