This reverts commit 773875bf.

It is very much needed and the lack of dithering has been reported by
a large list of people with various gen2/3 hardware.

Also, the original patch was complete non-sense since the WARNING
backtraces in the references bugzilla are about
gmch_pfit.lvds_border_bits mismatch, not at all about the dither bit.
That one seems to work.

Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Hans de Bruin <jmdebruin@xmsnet.nl>
Cc: stable@vger.kernel.org
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The panel power sequencer on vlv doesn't appear to accept changes to its
T12 power down duration during warm reboots. This change forces a delay
for warm reboots to the T12 panel timing as defined in the VBT table for
the connected panel.

Ver2: removed redundant pr_crit(), commented magic value for pp_div_reg

Ver3: moved SYS_RESTART check earlier, new name for pp_div.

Ver4: Minor issue changes

Ver5: Move registration of reboot notifier to edp_connector_init,
      Added warning comment to handler about lack of PM notification.
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The console subsystem only provides a function to switch to a given
console, but we want to actually only switach away from vgacon.
Unconditionally switching to the dummy console resulted in switching
away from fbcon in multi-gpu setups when other gpu drivers are loaded
before i915.

Then either the reinitialization of fbcon when i915 registers its
fbdev emulation or the teardown of the fbcon driver killed the
machine. So only switch to the dummy console when it's required.

Kudos to Chris for the original idea, I've only refined it a bit to
still unregister vgacon even when it's currently unused.

This regression has been introduced in

commit a4de0526
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jun 5 16:20:46 2014 +0200

    drm/i915: Kick out vga console
Reported-and-tested-by: NEd Tomlinson <edt@aei.ca>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On most gen2-4 platforms the GTT can be (or maybe always is?)
inside the stolen memory region. If that's the case, reduce the
size of the stolen memory appropriately to make make sure we
don't clobber the GTT.

v2: Deal with gen4 36 bit physical address
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80151Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We should keep DEVICE_READY bit set in the ULPS enter sequence. In
exit sequence also we should set DEVICE_READY, but thats causing
blankout for me. Also exit sequence is simplified as per hw team
recommendation.

This should fix -
[drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

While sending DPI SHUTDOWN command, we cannot wait for FIFO empty as
pipes are not disabled at that time. In case of MIPI we disable port
first and send SHUTDOWN command while pipe is still running and FIFOs
will not be empty, causing spurious error log
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The Toshiba CB35 Chromebook (with Celeron 2955U CPU) has a controllable
backlight although its VBT reports otherwise. Apply quirk to ignore the
backlight presence check during backlight setup.

Patch tested by author on Toshiba CB35.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813Signed-off-by: NScot Doyle <lkml14@scotdoyle.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # 3.15 only
[danvet: Add cc: stable because the regressing commit is in 3.15.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The Acer C720 and C720P Chromebooks (with Celeron 2955U CPU) have a
controllable backlight although their VBT reports otherwise. Apply quirk
to ignore the backlight presence check during backlight setup.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813Tested-by: NJames Duley <jagduley@gmail.com>
Tested-by: NMichael Mullin <masmullin@gmail.com>
Signed-off-by: NScot Doyle <lkml14@scotdoyle.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # 3.15 only
[danvet: Add cc: stable because the regressing commit is in 3.15.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

commit c675949e
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Apr 9 11:31:37 2014 +0300

    drm/i915: do not setup backlight if not available according to VBT

caused a regression on machines with a misconfigured VBT. Add a quirk to
assert the presence of a controllable backlight. Use it to ignore the VBT
backlight presence check during backlight setup.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813Tested-by: NJames Duley <jagduley@gmail.com>
Tested-by: NMichael Mullin <masmullin@gmail.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NScot Doyle <lkml14@scotdoyle.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # 3.15 only
[danvet: Add cc: stable because the regressing commit is in 3.15.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some Thinkpad laptops' firmware will initiate a backlight level change
request through operation region on the events of AC plug/unplug, but
since we are not using firmware's interface to do the backlight setting
on these affected laptops, we do not want the firmware to use some
arbitrary value from its ASL variable to set the backlight level on
AC plug/unplug either.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=76491
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77091Reported-and-tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com>
Reported-and-tested-by: NAnton Gubarkov <anton.gubarkov@gmail.com>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

For Haswell and Broadwell, if the display power well has been disabled,
the display audio controller divider values EM4 M VALUE and EM5 N VALUE
will have been lost. The CDCLK frequency is required for reprogramming them
to generate 24MHz HD-A link BCLK. So provide a private interface for the
audio driver to query CDCLK.

This is a stopgap solution until a more generic interface between audio
and display drivers has been implemented.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Drop WA to fix Voltage not getting dropped to Vmin when Gfx is power
gated for latest VLV revision.

Workaround fixed in Latest VLV revision. Forcing Gfx clk up not needed,
and Requesting the min freq should bring bring the voltage Vnn.

v2: Drop WA for Latest VLV revision (Ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[Jani: modified code comment, reformatted the commit message a bit.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Apparently we can't trust this field on other platforms and need to find
some other way.

This fixes a regression introduced in
commit 27da3bdf
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Apr 4 16:12:07 2014 -0700

    drm/i915: use VBT to determine whether to enumerate the VGA port
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

BDW signals the flip done interrupt immediately after the DSPSURF write
when the plane is disabled. This is true even if we've already armed
DSPCNTR to enable the plane at the next vblank. This causes major
problems for our page flip code which relies on the flip done interrupts
happening at vblank time.

So what happens is that we enable the plane, and immediately allow
userspace to submit a page flip. If the plane is still in the process
of being enabled when the page flip is issued, the flip done gets
signalled immediately. Our DSPSURFLIVE check catches this to prevent
premature flip completion, but it also means that we don't get a flip
done interrupt when the plane actually gets enabled, and so the page
flip is never completed.

Work around this by re-introducing blocking vblank waits on BDW
whenever we enable the primary plane.

I removed some of the vblank waits here:
 commit 6304cd91
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Fri Apr 25 13:30:12 2014 +0300

    drm/i915: Drop the excessive vblank waits from modeset codepaths

To avoid these blocking vblank waits we should start using the vblank
interrupt instead of the flip done interrupt to complete page flips.
But that's material for another patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79354Tested-by: NGuo Jinxian <jinxianx.guo@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

For MIPI, DSI PLL is configured separately in vlv_configure_dsi_pll
during the DSI enable sequence

Causing WARN dump otherwise in dpio_reads

v2: Add IS_CHERRYVIEW check as suggested by Ville
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fixes an issue whereby we may race with the table updates (before the
core takes the struct_mutex) and so risk dereferencing a stale pointer in
the iterator for /debugfs/.../i915_gem_objects. For example,

[ 1524.757545] BUG: unable to handle kernel paging request at f53af748
[ 1524.757572] IP: [<c1406982>] per_file_stats+0x12/0x100
[ 1524.757599] *pdpt = 0000000001b13001 *pde = 00000000379fb067 *pte = 80000000353af060
[ 1524.757621] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 1524.757637] Modules linked in: ctr ccm arc4 ath9k ath9k_common ath9k_hw ath snd_hda_codec_conexant mac80211 snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec bnep snd_hwdep rfcomm snd_pcm gpio_ich dell_wmi sparse_keymap snd_seq_midi hid_multitouch uvcvideo snd_seq_midi_event dell_laptop snd_rawmidi dcdbas snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev snd_seq_device coretemp snd_timer hid joydev kvm_intel cfg80211 ath3k kvm btusb bluetooth serio_raw snd microcode soundcore lpc_ich wmi mac_hid parport_pc ppdev lp parport psmouse ahci libahci
[ 1524.757825] CPU: 3 PID: 1911 Comm: intel-gpu-overl Tainted: G        W  OE 3.15.0-rc3+ #96
[ 1524.757840] Hardware name: Dell Inc. Inspiron 1090/Inspiron 1090, BIOS A06 08/23/2011
[ 1524.757855] task: f52f36c0 ti: f4cbc000 task.ti: f4cbc000
[ 1524.757869] EIP: 0060:[<c1406982>] EFLAGS: 00210202 CPU: 3
[ 1524.757884] EIP is at per_file_stats+0x12/0x100
[ 1524.757896] EAX: 0000002d EBX: 00000000 ECX: f4cbdefc EDX: f53af700
[ 1524.757909] ESI: c1406970 EDI: f53af700 EBP: f4cbde6c ESP: f4cbde5c
[ 1524.757922]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 1524.757934] CR0: 80050033 CR2: f53af748 CR3: 356af000 CR4: 000007f0
[ 1524.757945] Stack:
[ 1524.757957]  f4cbdefc 00000000 c1406970 f53af700 f4cbdea8 c12e5f15 f4cbdefc c1406970
[ 1524.757993]  0000ffff f4cbde90 0000002d f5dc5cd0 e4e80438 c1181d59 f4cbded8 f4d89900
[ 1524.758027]  f5631b40 e5131074 c1903f37 f4cbdf28 c14068e6 f52648a0 c1927748 c1903f37
[ 1524.758062] Call Trace:
[ 1524.758084]  [<c1406970>] ? i915_gem_object_info+0x510/0x510
[ 1524.758106]  [<c12e5f15>] idr_for_each+0xa5/0x100
[ 1524.758126]  [<c1406970>] ? i915_gem_object_info+0x510/0x510
[ 1524.758148]  [<c1181d59>] ? seq_vprintf+0x29/0x50
[ 1524.758168]  [<c14068e6>] i915_gem_object_info+0x486/0x510
[ 1524.758189]  [<c11823a6>] seq_read+0xd6/0x380
[ 1524.758208]  [<c116d11d>] ? final_putname+0x1d/0x40
[ 1524.758227]  [<c11822d0>] ? seq_hlist_next_percpu+0x90/0x90
[ 1524.758246]  [<c1163e52>] vfs_read+0x82/0x150
[ 1524.758265]  [<c11645d6>] SyS_read+0x46/0x90
[ 1524.758285]  [<c16b8d8c>] sysenter_do_call+0x12/0x22
[ 1524.758298] Code: f5 8f 2a 00 83 c4 6c 31 c0 5b 5e 5f 5d c3 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 04 3e 8d 74 26 00 83 41 04 01 <8b> 42 48 01 41 08 8b 42 4c 89 d7 85 c0 75 07 8b 42 60 85 c0 74
[ 1524.758461] EIP: [<c1406982>] per_file_stats+0x12/0x100 SS:ESP 0068:f4cbde5c
[ 1524.758485] CR2: 00000000f53af748
Reported-by: NSam Jansen <sam.jansen@starleaf.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Jansen <sam.jansen@starleaf.com>
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fallout from

commit 46470fc9
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Wed May 21 19:01:06 2014 +0300

    drm/i915: Add null state batch to active list

undid the earlier fix of only marking the ctx as initialised after it is
saved by the hardware during a SET_CONTEXT operation:

commit ad1d2199
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Sat Dec 28 13:31:49 2013 -0800

    drm/i915: set ctx->initialized only after RCS
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[Jani: add reference to the earlier fix in the commit messsage.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Apparently there are Apple laptops with magic smoke for a VBIOS, which
we fail to find and use. Default to having and setting up backlight in
this case.

This fixes a regression introduced by
commit c675949e
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Apr 9 11:31:37 2014 +0300

    drm/i915: do not setup backlight if not available according to VBT

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77831Reported-and-tested-by: NMatteo Cypriani <mcy@lm7.fr>
Cc: stable@vger.kernel.org # 3.15+
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Jesse noticed that the punit communication needed to query the VLV power
well status can cause substantial delays. Since we can query the state
frequently, for example during I2C transfers, maintain a cached version
of the HW state to get rid of this delay.

This fixes at least one reported regression where boot time increased by
~4 seconds due to frequent power well state queries on VLV during eDP
EDID read.

This regression has been introduced in

commit bb4932c4
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Apr 14 20:24:33 2014 +0300

    drm/i915: vlv: check port power domain instead of only D0 for eDP VDD on
Reported-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When a machine is booted with nomodeset option, i915 driver skips the
whole initialization.  Meanwhile, HD-audio tries to bind wth i915 just
by request_symbol() without knowing that the initialization was
skipped, and eventually it hits WARN_ON() in i915_request_power_well()
and i915_release_power_well() wrongly but still continues probing,
even though it doesn't work at all.

In this patch, both functions are changed to return an error in case
of uninitialized state instead of WARN_ON(), so that HD-audio driver
can give up HDMI controller initialization at the right time.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> [3.15]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Correct a merge mishap in

commit e4443e45
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Apr 9 13:28:41 2014 +0300

    drm/i915/chv: Add a bunch of pre production workarounds

Remove the the chv specific workarounds from bdw code, specifically
gen8_enable_rps().
Signed-off-by: NTom O'Rourke <Tom.O'Rourke@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
[Jani: extract hunk #1 for 3.16 from Tom's patch, clarify commit message]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

---

All, I intend to push this to drm-intel-fixes, any objections?

Jani.

If the timer putting the last forcewake refcount was pending and we
canceled it, we'll leak the corresponding forcewake and RPM references.

v2:
- do the ptr casting at the caller instead of adding a separate helper
  for this (Chris)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

If a semaphore is waiting on another ring, which in turn happens to be
waiting on the first ring, but that second semaphore has been signalled,
we will be able to kick the second ring and so can treat the first ring
as a valid WAIT and not as HUNG.

v2: Be paranoid and cap the potential recursion depth whilst visiting
the semaphore signallers. (Mika)

References: https://bugs.freedesktop.org/show_bug.cgi?id=54226
References: https://bugs.freedesktop.org/show_bug.cgi?id=75502Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Otherwise we print out spurious processes on unused rings in the error
state.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

For reasons I can't claim to fully understand gen4 seems to require
backlight duty cycle setting after the backlight has been enabled, or
else black screen follows. I don't have documentation for the correct
sequence on gen4 either. Confirmed on Dell Latitude D630 and MacBook4,1.

This fixes a regression introduced by
commit b35684b8
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Thu Nov 14 12:13:41 2013 +0200

    drm/i915: do full backlight setup at enable time

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75791
Reported-and-tested-by: mcy@lm7.fr
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79423Reported-and-tested-by: NMarc Milgram <mmilgram@redhat.com>
Cc: Stable <stable@vger.kernel.org> # 3.14+
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On certain platforms pixel_multiplier is read out in
.get_pipe_config(), but it also gets used to calculate the
pixel clock in intel_sdvo_get_config(). If the pipe is disable
but some SDVO outputs are active, we may end up dividing by zero
in intel_sdvo_get_config().

To avoid the problem simply check for zero pixel_multiplier and skip
the division. Another attempt at fixing this involved populating
pixel_multiplier to 1 even for disabled pipes, but that triggered a
WARN because SDVO_CMD_GET_CLOCK_RATE_MULT command failed and thus
encoder_pixel_multiplier was left at zero and didn't match
pipe_config->pixel_multiplier.

The "divide by pixel_multiplier" operation got introduced here:
 commit 18442d08
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Fri Sep 13 16:00:08 2013 +0300

    drm/i915: Fix port_clock and adjusted_mode.clock readout all over

and it has caused a regression on certain machines since they would
hit the div-by-zero during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76520
Cc: <stable@vger.kernel.org> # 3.13+
Tested-by: NTim Richardson <tim@tim-richardson.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

It causes black screen on bootup and is approximately 100x slower than
running with FBC disabled, so the GPU runs at a high frequency for much
longer - completely contrary to the power saving claims. It also still
has mutex deadlocks in multi-head scenarios, which can lead to a
system/X lockup. These bugs were known before FBC was enabled by default
on Haswell and still have not been fixed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79716Reported-and-tested-by: NJon Kristensen <info@jonkri.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
[Jani: update subject to reflect the actual change]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

I cannot see a need to provide a DRM_ version of ARRAY_SIZE(), only used
in a few places. I suspect its usage has been spread by copy & paste
rather than anything else.

Let's just remove it for plain ARRAY_SIZE().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Touching the VGA resources on an IVB EFI machine causes hard hangs when
we then kick out the efifb. Ouch.

Apparently this also prevents unclaimed register errors on hsw and
hard machine hangs on my i855gm when trying to unbind fbcon.

Also, we want this to make I915_FBDEV=n safe.

v2: Rebase and pimp commit message.

v3: We also need to unregister the vga console, otherwise the unbind
of the fb console before module unload might resurrect it again.

v4: Ignore errors when the vga console is already unregistered - this
can happen when e.g. reloading i915.ko.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67813
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The global gtt is setup up in 2 parts, so we need to be careful
with the cleanup. For consistency shovel it all into the ->cleanup
callback, like with ppgtt.

Noticed because it blew up in the out_gtt: cleanup code while
fiddling with the vgacon code.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

BDW uses IVB cursor offsets.

Whithout this patch it is not possible to use multiple outputs with cursor
on BDW.
The cursor gets completely crazy because update position uses the wrong
cursor register for the second pipe.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79621Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Daniel requested in the bug that I use a 3GB fallback size. Since this
is not in the spec as a valid size, I decided against it. We could
potentially add a patch to bump it to 3GB on top of this one.

This probably should be CC: stable - but I'll let the powers that be
decide that one.

Regression from a revert of the revert:
commit 7907f45b
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Wed Feb 19 22:05:46 2014 -0800

    Revert "drm/i915/bdw: Limit GTT to 2GB"

v2: Change ifdef to 32b, instead of ifndef
update comment

v3. Update comment to not wrap (Daniel).
Update commit message

v4: s/CONFIG_32/CONFIG_X86_32 (Jani).

v5: s/CONFIG_x86_32BIT/CONFIG_x86_32, as meant in v4
s/32B/32b (chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76619
Cc: stable@vger.kernel.org
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Tested-by: N"Yang, Guang A" <guang.a.yang@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Apparently it does more harm than good. Thomas Richter reports that
it helps his machine (Thinkpad X31) and there's another report from a
Fujitsu S6010. Also, we've nuked it on i845G already to make Chris'
machine happy.

Cc: Thomas Richter <richter@rus.uni-stuttgart.de>
References: http://mid.mail-archive.com/538C54E0.8090507@rus.uni-stuttgart.deSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, we refcount both power domains and power wells and
intel_display_power_enabled_sw() returns the power domain refcount. What
the callers are really interested in though is the sw state of the
underlying power wells. Due to this we will report incorrectly that a
given power domain is off if its power wells were enabled via another
power domain, for example POWER_DOMAIN_INIT which enables all power
wells.

As a fix return instead the state based on the refcount of all power
wells included in the passed in power domain.

References: https://bugs.freedesktop.org/show_bug.cgi?id=79505
References: https://bugs.freedesktop.org/show_bug.cgi?id=79038Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It is possible for userspace to create a big object large enough for a
256x256, and then switch over to using it as a 64x64 cursor. This
requires the cursor update routines to check for a change in width on
every update, rather than just when the cursor is originally enabled.

This also fixes an issue with 845g/865g which cannot change the base
address of the cursor whilst it is active.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[Antti:rebased, adjusted macro names and moved some lines, no functional
changes]
Reviewed-by: NAntti Koskipaa <antti.koskipaa@linux.intel.com>
Tested-by: NAntti Koskipaa <antti.koskipaa@linux.intel.com>
Cc: stable@vger.kernel.org
Testcase: igt/kms_cursor_crc/cursor-size-change
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If both KMS is disabled (by i915.modeset=0 or nomodeset parameters) and
UMS is disabled (by CONFIG_DRM_I915_UMS=n, the default), the user might
not be aware his setup is not supported. Inform the users (and, by
extension, the poor i915 developers having to read their dmesgs in bug
reports) why their graphics experience might be lacking.

A similar message was added on the UMS path in
commit e147accb
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Thu Oct 10 15:25:37 2013 +0300

    drm/i915: tell the user KMS is required for gen6+

but it won't be reached if CONFIG_DRM_I915_UMS=n since
commit b30324ad
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Nov 13 22:11:25 2013 +0100

    drm/i915: Deprecated UMS support

v2: Use DRM_DEBUG_DRIVER.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some platforms may not have it, and enumerating it is both confusing and
time consuming due to the hotplug and DDC probing.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Gen2 doesn't have the ring idle/stop bits in the SCPD/MI_MODE register,
so don't go spewing warnings about the state of those bits.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the user tries to mmap through the GTT an object that is marked as
snooped, we report an error rather than allow the GPU to hang the
machine. The choice of EINVAL, however, was unfortunate as we turn that
into a WARN rather than a quiet SIGBUS.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move the MI_ARB_STATE MI_ARB_C3_LP_WRITE_ENABLE setup to
gen3_init_clock_gating() from i915_gem_load() when KMS is enabled. Leave
it in i915_gem_load() for the UMS case, but add an explcit check, just
to make it easier to spot it when we eventually rip out UMS support.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>