- 27 4月, 2009 8 次提交
-
-
由 Mike Christie 提交于
Set target can queue limit to the number of preallocated session tasks we have. This along with the cxgb3i can_queue patch will fix a throughput problem where it could only queue one LU worth of data at a time. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
If a command's scsi cmd pdu setup fails then we can just fail the IO to the scsi layer. If a DATA_OUT for a R2T fails then we will want to drop the session, because it means we got a bad request from the target (iscsi protocol error). This patch has us propogate the error upwards so libiscsi_tcp or libiscsi can decide what the best action is to take. It also fixes a bug where we could try to grab the session lock while holding it, because if iscsi_tcp drops the session in the pdu setup callout the session lock is held when setting up the scsi cmd pdu. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
We cannot call blk_plug_device from scsi_target_queue_ready because the q lock is not held. And we do not need to call it from there because when we return 0, the scsi_request_fn not_ready handling will plug the queue for us if needed. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Update driver version to 8.3.1 Also update copyright end year for driver. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
8.3.1 Fixes/Changes : - Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC) - Remove a bad cast of MBslimaddr which loses the __iomem (sparse) - Make lpfc_debugfs_mask_disc_trc static (sparse) - Correct misspelled word BlockGuard in lpfc_logmsg.h comment - Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs(). - Increased HBQ buffers to support 40KB SSC sequences. - Added sysfs interface to update speed and topology parameter without link bounce. - Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs. - Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test - Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport - Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called. - Fixed "Nodelist not empty" message when unloading the driver after target reboot test - Added LP2105 HBA model description - Added code to print all 16 words of unrecognized ASYNC events - Fixed memory leak in vport create + delete loop - Added support for handling dual error bit from HBA - Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb - Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node - Take NULL termintator into account when calculating available buffer space Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 FUJITA Tomonori 提交于
blk_rq_unmap_user() returns EFAULT if a program passes an invalid address to kernel (the kernel fails to copy data to user space). sg needs to pass the returned value to user space instead of ignoring it. Before the block layer conversion, sg returns EFAULT properly. This restores the old behavior. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NDouglas Gilbert <dgilbert@interlog.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Peter Jones 提交于
So, what's happening here is that the drive is reporting a sense of 2/4/1 ("logical unit is becoming ready") from sr_test_unit_ready(), and then we ask for the media event notification before checking that result at all. The check_media_event_descriptor() call isn't getting a check condition, but it's also reporting that the tray is closed and that there's no media. In actuality it doesn't yet know if there's media or not, but there's no way to express that in the media event status field. My current thought is that if it told us the device isn't yet ready, we should return that immediately, since there's nothing that'll tell us any more data than that reliably: Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 23 4月, 2009 1 次提交
-
-
由 Geert Uytterhoeven 提交于
commit 7a192ec3 ("platform driver: fix incorrect use of 'platform_bus_type' with 'struct device_driver') turned a driver_UNregister into platform_driver_REGISTER. Correct this to platform_driver_UNregister. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 22 4月, 2009 1 次提交
-
-
由 Arjan van de Ven 提交于
There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 4月, 2009 1 次提交
-
-
由 David Howells 提交于
Fix lpfc_parse_bg_err()'s use of do_div(). It should be passing a 64-bit variable as the first parameter. However, since it's only using a 32-bit variable, it doesn't need to use do_div() at all, but can instead use the division operator. This deals with the following warnings: CC drivers/scsi/lpfc/lpfc_scsi.o drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err': drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 4月, 2009 2 次提交
-
-
由 Yang Hongyang 提交于
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
There is a race between resume from hibernation and the asynchronous scanning of SCSI devices and to prevent it from happening we need to call scsi_complete_async_scans() during resume from hibernation. In addition, if the resume from hibernation is userland-driven, it's better to wait for all device probes in the kernel to complete before attempting to open the resume device. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 4月, 2009 1 次提交
-
-
由 David Woodhouse 提交于
We were calculating the wrong address for the start of the data. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Tested-by: NJeremy Higdon <jeremy@sgi.com>
-
- 07 4月, 2009 5 次提交
-
-
由 Yang Hongyang 提交于
Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yang Hongyang 提交于
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yang Hongyang 提交于
Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yang Hongyang 提交于
Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yang Hongyang 提交于
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 4月, 2009 21 次提交
-
-
由 FUJITA Tomonori 提交于
sg_rq_end_io() is called via rq->end_io. In some rare cases, sg_rq_end_io calls blk_put_request/blk_rq_unmap_user (when a program issuing a command has gone before the command completion; e.g. by interrupting a program issuing a command before the command completes). We can't call blk_put_request/blk_rq_unmap_user in interrupt so the commit c96952ed uses execute_in_process_context(). The problem is that scsi_error_handler() calls rq->end_io too. We can't call blk_put_request/blk_rq_unmap_user too in this path (we hold q->queue_lock). To avoid the above problem, in these rare cases, this patch always uses schedule_work() instead of execute_in_process_context(). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Acked-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Adrian Bunk 提交于
a2091_{detect,release}() can become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Adrian Bunk 提交于
a3000_{detect,release}() can become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Wei Yongjun 提交于
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 FUJITA Tomonori 提交于
- needs to use copy_from_user for iovec before passing it to blk_rq_map_user_iov(). - before the block layer conversion, if ->dxfer_len and sum of iovec disagrees, the shorter one wins. However, currently sg returns -EINVAL. This restores the old behavior. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: stable@kernel.org Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Jaswinder Singh Rajput 提交于
Firmware blob is little endian Thanks to Stephen Rothwell for fixing typos Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Jaswinder Singh Rajput 提交于
Firmware blob looks like this... __le32 checksum unsigned char data[] Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Jaswinder Singh Rajput 提交于
Firmware blob is little endian looks like this... unsigned char Version1 unsigned char Version2 unsigned char Version3 unsigned char Padding unsigned short start_address unsigned short data Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Jean Delvare 提交于
Le lundi 30 mars 2009, Chris Wright a écrit : > q->queue could be ERR_PTR(-ENOMEM) which will break unwinding > on error. Make iscsi_pool_free more defensive. > Making the freeing of q->queue dependent on q->pool being set looks really weird (although it is correct at the moment. But this seems to be fixable in a much simpler way. With the benefit that only the error case is slowed down. In both cases we have a problem if q->queue contains an error value but it's not -ENOMEM. Apparently this can't happen today, but it doesn't feel right to assume this will always be true. Maybe it's the right time to fix this as well. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
cxgb3i_ddp_cleanup just calls ddp_release directly so there is no reason for the wrapper. This patch just renames ddp_release to cxgb3i_ddp_cleanup and removes the old wrapper function. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Karen Xie 提交于
- Merge cxgb3i_ddp.ko to cxgb3i.ko as there is no other users. - Bump the driver version up to 1.0.2. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Karen Xie 提交于
Keep track of offloaded tcp connections per adapter. Close all of the connections upon reset. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
Orignally from Karen Xie, but merge conflicts/errors fixed up by Mike Christie. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Karen Xie 提交于
Re-initialize the ddp settings after chip reset. It includes re-initialize the related registers and the ddp map. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Karen Xie 提交于
Add error notification handling function which is called during chip reset. Signed-off-by: NKaren Xie <kxie@chelsio.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Leubner, Achim 提交于
changes: - set aac_cache=2 as default value to avoid performance problem (Novell bugzilla #469922) - Dell/PERC controller boot problem fixed (RedHat bugzilla #457552) - WWN flag added to fix SLES10 SP1/SP2 drive detection problems - 64-bit support changes - DECLARE_PCI_DEVICE_TABLE macro added - controller type changes Signed-off-by: NAchim Leubner <aacraid@adaptec.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Alan Cox 提交于
Mention ATAPI. We could insert an essay about libata and ide-scsi etc but the failure case is someone enables it which is just fine so keep it simple. (Revised text from suggestion by Matthew Wilcox) Closes #7736 Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Ed Lin 提交于
Signed-off-by: NEd Lin <ed.lin@promise.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Ed Lin 提交于
This adds the support of a new SAS 6G controller (st_yel) Signed-off-by: NEd Lin <ed.lin@promise.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-