SCSI doesn't want drivers to modify request_bufflen, so keep a
driver-private copy of this in the scsi_pointer structure instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Replace the I2C bus address, as per drivers/acorn/char/pcf8583.c.

Also, since this driver also contains Acorn RiscPC specific code
for obtaining the current year from the SRAM (and updating the
platform specific checksum when writing new data back) this is
NOT a platform independent driver.

Document it as such, and update the dependencies to reflect this
fact.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

No, today is not 4th April 3907, it's 4th March 2007.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Both BCD_TO_BIN(x) and BIN_TO_BCD(x) have an unexpected side-effect -
not only do they return the value as expected, they _modify_ their
argument in the process.

Let's play it safe and avoid these macros.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Work around EBSA110 build errors by selecting NO_IOPORT.  EBSA110
can't support an IO port to MMIO mapping mechanism because the
MMIO and IO port spaces have quite different and complex addressing
requirements.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently, the mb() is defined as a DMB operation on ARMv6, even for
UP systems. This patch defines mb() as a compiler barrier only. For
the SMP case, the smp_* variants should be used anyway and the patch
defines them as DMB.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update help text with location of documentation
and duplicate the note on the speed of CRC
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove some of the explicit use of S3C2410 where
it is generic to all the S3C24XX series. Add more
info on the CRC code, and add an example of using
IRQ_EINT0 to resume from suspend
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Always allow backtrace when using oprofile on ARM, even if a PMU
isn't present.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Only entries for omap1 were added earlier.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use linux/delay.h not asm/delay.h
Signed-off-by: NTony Lindgren <tony@atomide.com>

Remove obsolete alsa typedefs
Signed-off-by: NTony Lindgren <tony@atomide.com>

Convert 1510->15xx in generic omap code, so that sx1 can work.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add missing includes to board-nokia770 to make it
compile again.

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Workqueue changes for board-h4.c

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

When I went to use dmtimer7 it did not seem to work.  I noticed that
the base addresses for dmtimers 7 and 8 were set wrong.  A simple patch
to correct a small error.  Confirmed to fix the problem on an OSK.
Signed-off-by: NMatthew Percival <matthew@capgo.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Some time ago, the 'lcd_lph8923' device was renamed to 'lcd_mipid' but
the board-nokia770.c file was not updated accordingly, leading to not
working lcd.

This one-liner fixe the trouble.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Teach OMAP2 gp timer that HZ isn't always 100.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix warning

arch/arm/mach-omap1/pm.c: In function 'omap_pm_init':
arch/arm/mach-omap1/pm.c:765: warning: ignoring return value
of 'subsys_create_file', declared with attribute
warn_unused_result

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix broken CONFIG_DEBUG_LL. In case of low level debugging
reconfigure some clocks early.

See

http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff;h=3bfb289ccc6c4624fd5ff0381546935e105f4093

too.

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix warning

arch/arm/mach-omap2/timer-gp.c: In function
'omap2_gp_timer_init':
arch/arm/mach-omap2/timer-gp.c:70: warning: implicit
declaration of function 'setup_irq'

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix warnings

arch/arm/plat-omap/dmtimer.c: In function
'omap_dm_timer_modify_idlect_mask':
arch/arm/plat-omap/dmtimer.c:317: warning: no return
statement in function returning non-void

arch/arm/plat-omap/mailbox.c: In function 'omap_mbox_init':
arch/arm/plat-omap/mailbox.c:231: warning: ignoring return
value of 'class_device_create_file', declared with attribute
warn_unused_result

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

No IRQF_TRIGGER set_type function for IRQ 353 (MPUIO)

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This makes serial usable also on omap310, not only 1510.
(changing 1510->15xx)
Signed-off-by: NMarek Vašut <marek.vasut@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The register bits are reset by writing one. Remove the unneeded reads and
fix writes to not clear too many bits.
Signed-off-by: NTimo Teras <timo.teras@solidboot.com>
Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix warning:

arch/arm/mach-omap1/clock.c: In function
'omap1_clk_enable_generic':
arch/arm/mach-omap1/clock.c:499: warning: 'return' with no
value, in function returning non-void

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Disable accesses to SOFT_REQ_REG2 and ULPD_SOFT_DISABLE_REQ_REG
registers for 15xx processors that don't have these registers. Enable
level 2 interrupt handler for processors that identify as OMAP 15xx
(e.g 310) and not 1510 specifically. Also fix the following compiler
warning (only visible with CONFIG_OMAP_RESET_CLOCKS):

arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused':
arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in
function returning void
Signed-off-by: NAndrzej Zaborowski <balrog@zabor.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: improve spurious SDB FIS handling
  ahci/pata_jmicron: match class not function number
  jmicron ATA: reimplement jmicron ATA quirk
  pata_jmicron: drop unnecessary device programming in [re]init
  libata: blacklist FUJITSU MHT2060BH for NCQ
  sata_sil24: kill unused local variable idx in sil24_fill_sg()
  libata: clear drvdata in ata_host_release(), take#2

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle button
  HID: add git tree information to MAINTAINERS
  HID: fix broken Logitech S510 keyboard report descriptor; make extra keys work
  HID: fix possible double-free on error path in hid parser
  HID: hid-debug.c should #include <linux/hid-debug.h>
  HID: fix bug in zeroing the last field byte in output reports
  USB HID: use CONFIG_HID_DEBUG for outputting report descriptor
  USB HID: Fix USB vendor and product IDs endianness for USB HID devices

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix parport_pc build.
  [SPARC64]: Update defconfig.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Fix minisock tcp_create_openreq_child() typo.
  [TCP]: Document several sysctls.
  [NET]: Fix kfree(skb)
  [NET]: Handle disabled preemption in gfp_any()
  [BRIDGE]: Fix locking of set path cost.
  [IPV6]: /proc/net/anycast6 unbalanced inet6_dev refcnt
  [IPX]: Remove ancient changelog
  [IPX]: Remove outdated information from Kconfig
  [NET]: Revert socket.h/stat.h ifdef hacks.
  [IPV6]: anycast refcnt fix
  [XFRM] xfrm_user: Fix return values of xfrm_add_sa_expire.

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5305): Mark VIDIOC_DBG_S/G_REGISTER as experimental
  V4L/DVB (5271): Add VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls.
  V4L/DVB (5270): Add VIDIOC_G_ENC_INDEX ioctl
  V4L/DVB (5276): Cxusb: fix firmware patch for big endian systems
  V4L/DVB (5258): Cafe_ccic: fix compiler warning
  V4L/DVB (5295): Digitv: open nxt6000 i2c_gate for TDED4 tuner handling
  V4L/DVB (5304): Improve chip matching in v4l2_register
  V4L/DVB (5255): Fix cx25840 firmware loading.

B0rkage introduced by dfa87c82.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Spurious SDB FIS during NCQ might not contain spurious completions.
It could be spurious TF update or invalid async notification.  Treat
as HSM violation iff a spurious SDB FIS contains spurious completions;
otherwise, just whine once about it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Make jmiron_ata quirk update pdev->class after programming the device
and update ahci and pata_jmicron such that they match class code
instead of checking function number manually.  For ahci, it matches
for vendor and class.  For pata_jmicron, it matches vendor, device and
class as IDE class isn't as well defined as AHCI class.

This makes jmicron device matching more conventional and script
friendly.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Reimplement jmicron ATA quirk.

* renamed to quirk_jmicron_ata()
* quirk is invoked only for the affected controllers
* programming is stricter.  e.g. conf5 bit24 is cleared if
  unnecessary.
* code factored for readability
* JMB360 and JMB368 are programmed into proper mode

Verified on JMB360, 363 and 368.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Channel redirect and AHCI mode enable programmings are done via PCI
quirk for both probe and resume paths.  Drop duplicate and possibly
unsafe device programming from pata_jmicron().
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch provides the following hugetlb-related fixes to the recent stacked
shm files changes:
 - Update is_file_hugepages() so it will reconize hugetlb shm segments.
 - get_unmapped_area must be called with the nested file struct to handle
   the sfd->file->f_ops->get_unmapped_area == NULL case.
 - The fsync f_op must be wrapped since it is specified in the hugetlbfs
   f_ops.

This is based on proposed fixes from Eric Biederman that were debugged and
tested by me.  Without it, attempting to use hugetlb shared memory segments
on powerpc (and likely ia64) will kill your box.
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NWilliam Irwin <bill.irwin@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>