Fix vivi and mem2mem_testdev build errors: need to #include <linux/slab.h>:

drivers/media/video/vivi.c:1144: error: implicit declaration of function 'kfree'
drivers/media/video/vivi.c:1156: error: implicit declaration of function 'kzalloc'
drivers/media/video/vivi.c:1156: warning: assignment makes pointer from integer without a cast
drivers/media/video/mem2mem_testdev.c:862: error: implicit declaration of function 'kzalloc'
drivers/media/video/mem2mem_testdev.c:862: warning: assignment makes pointer from integer without a cast
drivers/media/video/mem2mem_testdev.c:874: error: implicit declaration of function 'kfree'
drivers/media/video/mem2mem_testdev.c:944: warning: assignment makes pointer from integer without a cast
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

bugfix incorrect image and line position in videobuffer
Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On Tue, May 04, 2010 at 06:06:41PM +0200, Dan Carpenter wrote:
> On Tue, May 04, 2010 at 10:03:18AM -0400, Jarod Wilson wrote:
> > @@ -1205,7 +1204,7 @@ static u32 imon_panel_key_lookup(u64 hw_code)
> >  		if (imon_panel_key_table[i].hw_code == (code | 0xffee))
> >  			break;
> >
> > -	keycode = imon_panel_key_table[i % IMON_KEY_RELEASE_OFFSET].keycode;
> > +	keycode = imon_panel_key_table[i].keycode;
> >
> >  	return keycode;
> >  }
>
> There is still potentially a problem here because if we don't hit the
> break statement, then we're one past the end of the array.

D'oh. Okay, here's v2, should fix that buglet too.

This hack was used when the imon driver was using internal key lookup
routines, but became dead weight when the driver was converted to use
ir-core's key lookup routines. These bits simply didn't get removed,
drop 'em now.

Pointed out by Dan Carpenter.

v2: fix possible attempt to access beyond end of key table array,
also pointed out by Dan.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by Dan Carpenter:
> This was my patch:  "cx25821: fix double unlock in medusa_video_init()"
>
> It accidentally got merged two times.  The version from the staging tree
> is not correct.  Please can you revert it:
> 7a02f549 "Staging: cx25821: fix double
> unlock in medusa_video_init()"

After reviewing the logic at the function, instead of just adding a patch to
revert the wrong one, the better is to apply a different logic: add a goto
that will always unlock and return the error.

This simplifies the code a little bit, and, instead of just return -EINVAL,
it will return the error condition reported by the called functions.

This patch is folded with another patch from Dan that added one missing
goto.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If my dvb device is removed while in use, I got the following oops:

[ 4920.484084] Call Trace:
[ 4920.484102]  [<c102daad>] ? default_wake_function+0x0/0x8
[ 4920.484147]  [<f8cb09e1>] ? dvb_unregister_frontend+0x95/0xcc [dvb_core]
[ 4920.484157]  [<c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484168]  [<f8dd1af2>] ? dvb_usb_adapter_frontend_exit+0x12/0x21 [dvb_usb]
[ 4920.484176]  [<f8dd12f1>] ? dvb_usb_exit+0x26/0x88 [dvb_usb]
[ 4920.484184]  [<f8dd138d>] ? dvb_usb_device_exit+0x3a/0x4a [dvb_usb]
[ 4920.484217]  [<f7fe1b08>] ? usb_unbind_interface+0x3f/0xb4 [usbcore]
[ 4920.484227]  [<c11a4178>] ? __device_release_driver+0x74/0xb7
[ 4920.484233]  [<c11a4247>] ? device_release_driver+0x15/0x1e
[ 4920.484243]  [<c11a3a33>] ? bus_remove_device+0x6e/0x87
[ 4920.484249]  [<c11a26d6>] ? device_del+0xfa/0x152
[ 4920.484264]  [<f7fdf609>] ? usb_disable_device+0x59/0xb9 [usbcore]
[ 4920.484279]  [<f7fdb9ee>] ? usb_disconnect+0x70/0xdc [usbcore]
[ 4920.484294]  [<f7fdc728>] ? hub_thread+0x521/0xe1d [usbcore]
[ 4920.484301]  [<c1044412>] ? autoremove_wake_function+0x0/0x2d
[ 4920.484316]  [<f7fdc207>] ? hub_thread+0x0/0xe1d [usbcore]
[ 4920.484321]  [<c10441e0>] ? kthread+0x61/0x66
[ 4920.484327]  [<c104417f>] ? kthread+0x0/0x66
[ 4920.484336]  [<c1003d47>] ? kernel_thread_helper+0x7/0x10

If there are users (for example users == -2) :
 - dvb_unregister_frontend :
 - stop kernel thread with dvb_frontend_stop :
  - fepriv->exit = 1;
  - thread loop catch stop event and break while loop
  - fepriv->thread = NULL; and fepriv->exit = 0;
 - dvb_unregister_frontend wait on "fepriv->dvbdev->wait_queue" that fepriv->dvbdev->users==-1.
The user finish :
 - dvb_frontend_release - set users to -1
 - don't wait wait_queue because fepriv->exit != 1

=> dvb_unregister_frontend never exit the wait queue.
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

My concern initially was we dereference "dev" in the parameter list to
s2255_dev_err() but it turns out that code path is never used.
The s2255_stop_readpipe() is only called from one place and "dev" is
never null.  So this patch just removes the whole condition here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: linux-dev@sensoray.com
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original code didn't handle the case where vdev was not found so I
added a check for that.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: linux-dev@sensoray.com
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We dereference "ov" unconditionally throughout the function so there is
no way it can be NULL here.  This code has been around for ages so if
it were possible for "ov" to be NULL someone would have complained.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We dereferenced "ctx" on the error path.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a missing include linux/delay.h to prevent
build failures[1-5]
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The "stv6110x" is NULL so we can just return directly without calling
kfree().  Also I changed the printk() to make checkpatch.pl happy.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add the demod and tuner dependencies required for the Avermedia m780 to the
Kconfig for the ngene driver.

Thanks to Oliver Endriss for pointing this out.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Start moving the dvb specific code to ngene-dvb.c.  Note that there is still
stuff in ngene-core.c which could potentially be moved out, but it will require
considerable reworking of the logic in order to continue to properly support
DVB while also being able to support transport streams coming from analog MPEG
encoders.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Split out the card profiles into a new file called ngene-cards.c.  This is
part of a larger refactoring of the driver in preparation for adding analog
support.

Note that this patch makes *no* functional change - all I did was cut/paste the
code and add the function prototypes to ngene.h as needed.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Split out the i2c related code from the ngene-core.c into a new file called
ngene-i2c.c.  This is part of a larger refactoring of the driver in preparation
for adding analog support.

Note that this patch makes *no* functional change - all I did was cut/paste the
code and add the function prototypes to ngene.h as needed.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add ATSC/QAM support for the Avermedia m780.  Note that this patch does
not include any analog support for the board, as the ngene bridge driver does
not yet have analog implemented
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The current code assumes that channel zero is always a TS input, which would
result in an oops if the "one_adapter" modprobe option is 1 (which it is by
default) and the board in question has something else on channel zero (which
is the case for the Avermedia m780, which has it's analog input wired to UVI1)

The code now explicitly tracks the first adapter created and ensures that
other channels cannot accidentially be associated with a NULL adapter.

Also, eliminate what appears to be a typo where all of the channel parameters
are getting associated with stream zero's properties, which will work if you
happen to have a dual stream board with the exact same configuration, but if
they differ then the second stream is going to end up with the first stream's
configuration.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If the az6027_usb_in_op() returns a negative errno ret is -EIO and in
that case the value of b[0] may be undefined.  The original code
assigned 0 to ret, but since it's already 0 now we can skip that.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I changed the dma buffers to use allocated memory instead of stack
memory.

The reason for this is documented in Documentation/DMA-API-HOWTO.txt
under the section:  "What memory is DMA'able?"  That document was only
added a couple weeks ago and there are still lots of modules which
haven't been corrected yet.  Btw. Smatch includes a pretty good test to
find places which use stack memory as a dma buffer.  That's how I found
these.  (http://smatch.sf.net).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If there is an error here we should unlock in the caller (which is
imon_init_intf1()).  We can remove this stray unlock.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There is a typo here.  We meant to test "ir" instead of "props".  The
"props" variable was tested earlier.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The original condition is always false because ! has higher precedence
than == and neither 0 nor 1 is equal to IMON_DISPLAY_TYPE_VGA.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement enum_dv_presets in tvp7002.
Signed-off-by: NMats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The op enum_dv_preset was missing in this header but is needed by subdev
drivers with DV functionality.
Signed-off-by: NMats Randgaard <mats.randgaard@tandberg.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NBrian Johnson <brijohn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reverse HAS_BUTTON logic since most webcams either have a button or if
they don't don't bother to send any interrupts. However I have at least
one model that appears to leave the button GPIO floating and can send
a bogus interrupt.
Signed-off-by: NBrian Johnson <brijohn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NBrian Johnson <brijohn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NBrian Johnson <brijohn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

VIDIOC_S_PRIORITY is also part of the ioctls that need to check the
access priority.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The detection of the saa711x often failed. Adding a small delay before
attempting to detect it fixed this.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l2_device_register already sets intfdata, no need to do this again.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Disconnecting the HDPVR caused a kernel oops if lockdep was enabled.
In addition, if an app still had video0 open and attempted to call ioctl
when the device was already disconnected the system would crash.

Move the freeing and cleanup code to the release function: that is the
right place for it since you know when you get there that nobody is
using the device.

Also removed usb_set_intfdata: v4l2_device_register sets this already
to v4l2_dev.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l2_device_register already sets the usb intfdata to v4l2_dev. So use
that instead.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

No need to lock when unregistering the device: clear_bit is already an
atomic operation.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 'type' field was undefined but should be set to ANALOG_TV.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If no signal or valid format is detected, then VIDIOC_QUERY_DV_PRESET must
return 0 and set the preset to V4L2_DV_INVALID.

This driver returned an error instead.

Also simplified the kernel messages a bit: change v4l2_err to v4l2_dbg (not
detecting a signal/valid format is not an error, so only print this info when
debug == 1) and do not call v4l_fill_dv_preset_info: it's overkill to do this
just for a debug message.

Thanks to Mats Randgaard for bringing this to my attention.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l2_prio_init/open/close returned an int when in fact they would
always return 0. Make these void functions.

v4l2_prio_close and v4l2_prio_check pass an enum v4l2_priority as a
pointer for no good reason. Replace with a normal enum v4l2_priority
argument.

These changes will simplify the work of moving priority handling into
the v4l core.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>