Rename __qbuf_*() functions which are specific to a buffer type as
__prepare_*() which matches with what they do. The naming was there for
historical reasons; the purpose of the functions was changed without
renaming them.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There's a Macro that checks if gcc supports a warning before
disabling it. Use it, in order to avoid warnings when building
with older gcc versions.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The atomisp css2400/Makefile includes a Makefile.common:

	include $(srctree)/$(src)/../Makefile.common

Well, this file doesn't exist at the Kernel tree :-)

So, don't include it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The async sub-device was not unregistered in ad5820_remove() as it should
have been; do it now. Also remove the now-redundant
v4l2_device_unregister_subdev().
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Depending on arch configs to include dirs is evil, and makes
harder to change drivers to work with COMPILE_TEST.

Replace them by obj-y.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The DaVinci VPIF capture driver V4L2 OF support was added after the V4L2
OF framework got removed. Switch VPIF capture driver to V4L2 fwnode.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>

The 2nd check of cnt > 8 is redundant as cnt is already checked
and thresholded to a maximum of 8 a few statements earlier.
Remove this redundant 2nd check.

Detected by CoverityScan, CID#114281 ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some EXPORT_SYMBOL() on this file don't match the name of functions
that preceeds them.

Also, some kernel-doc markups also have a wrong name. Fix it.
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make checkpatch happier by fixing this warning:
  ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: NJasmin Jessich <jasmin@anw.at>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

hmm_init calls hmm_alloc to set dummy_ptr, hmm_alloc calls
hmm_init when dummy_ptr is not yet set, which is the case in
the call from hmm_init, so it calls hmm_init again, this continues
until we have a stack overflow due to the recursion.

This commit fixes this by adding a separate flag for tracking if
hmm_init has been called. Not pretty, but it gets the job done,
eventually we should be able to remove the hmm_init call from
hmm_alloc.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix "symbol 'xxxxxxx' was not declared. Should it be static?" sparse warnings.
Signed-off-by: NChen Guanqiao <chen.chenchacha@foxmail.com>
Reviewed-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is no reason for all this printk spamming and certainly
not at an error log level.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As the existing comment in the driver indicates the sensor has only 1 pin,
but some boards may have 2 gpios defined and we toggle both as we we don't
know which one is the right one. However if the ACPI resources table
defines only 1 gpio (as expected) the gpio1_ctrl call will always fail,
causing the probing of the driver to file.

This commit ignore the return value of the gpio1_ctrl call, fixing this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add OVTI2680 ACPI id to ov2680 driver
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add INT0310 ACPI id to gc0310 driver
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

menu controls are not allowed to have a step size, set step to 0 to
fix an oops from the WARN_ON in v4l2_ctrl_new_custom() triggering
because of this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Do not call dev_warn with a NULL device, this silence the following 2
warnings:

[   14.392194] (NULL device *): Failed to find gmin variable gmin_V2P8GPIO
[   14.392257] (NULL device *): Failed to find gmin variable gmin_V1P8GPIO

We could switch to using pr_warn for dev == NULL instead, but as comments
in the source indicate, the check for these 2 special gmin variables with
a NULL device is a workaround for 2 specific evaluation boards, so
completely silencing the missing warning for these actually is a good
thing.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

efivar_entry_get has certain alignment requirements and the atomisp
platform code was not honoring these, causing an oops by triggering the
WARN_ON in arch/x86/platform/efi/efi_64.c: virt_to_phys_or_null_size().

This commit fixes this by using the members of the efivar struct embedded
in the efivar_entry struct we kzalloc as arguments to efivar_entry_get(),
which is how all the other callers of efivar_entry_get() do this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Between the ISP2400 and ISP2401 code base this function moved file. The merge
of the drivers left us with two version in ifdefs. Resolve this down to a
single copy.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

We won't be adding abstractions or moving them here so kill it.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

ISP2401 introduced a helper for this which we can use just as well on the
ISP2400 and remove some more noise differences.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

ISP2401 introduced a rather sensible change to cut through the structure
spaghetti. Adopt that for the ISP2400 as well. It makes no difference to the
actual code other than readability.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The ISP2401 version of this function returns a pointer to the buffer, whilst
the ISP2400 version returns a boolean if a slot is found. We can trivially
unify the code to use the ISP2401 version.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This define is never set and these code paths are never used so they can go
away.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The isp->inputs[] array has isp->input_cnt elements which have been
initialized so this > should be >=.

This bug is harmless.  The check against ATOM_ISP_MAX_INPUTS prevents us
from reading beyond the end of the array.  The uninitialized elements
are zeroed out so we will end up returning -EINVAL a few lines later
because the .camera pointer is NULL.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The two drivers were machine merged and in this case the machine output was to
say the least not optimal.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

HRT_UNSCHED is never defined or set in the driver, so this is dead code that
can be retired, simplifying the code a bit further.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

With the removal of the HAS_BL bootloader code the value of NUM_OF_BLS is an
invariant zero. So let's get rid of it.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Kill off the HAS_BL define and the code and includes it brackets. We never
define HAS_BL or use that functionality.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix a couple of sparse warnings:
drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:59:14: warning: symbol 'repool_pgnr' was not declared. Should it be static?
drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:387:6: warning: symbol 'punit_ddr_dvfs_enable' was not declared. Should it be static?

Mark these symbols as static, so they are no longer incorrectly exported.
Signed-off-by: NJuan Antonio Pedreira Martos <juanpm1@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix warning issued by sparse: Using plain integer as NULL pointer
Signed-off-by: NPaolo Cretaro <melko@frugalware.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix checkpatch warnings of prefered using '%s..", __func__' as function
name in a string
Signed-off-by: NChristoph Fanelsa <eddi1983@gmx.net>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A driver error message is shown without DEBUG definition
to find an error and debug easily.
Signed-off-by: NHirokazu Honda <hiroh@chromium.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If the mdp_* nodes are under an mdp sub-node, their corresponding
platform device does not automatically get its iommu assigned properly.

Fix this by moving the mdp component nodes up a level such that they are
siblings of mdp and all other SoC subsystems.  This also simplifies the
device tree.

Although it fixes iommu assignment issue, it also break compatibility
with old device tree. So, the patch in driver is needed to iterate over
sibling mdp device nodes, not child ones, to keep driver work properly.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMinghsiu Tsai <minghsiu.tsai@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If the mdp_* nodes are under an mdp sub-node, their corresponding
platform device does not automatically get its iommu assigned properly.

Fix this by moving the mdp component nodes up a level such that they are
siblings of mdp and all other SoC subsystems.  This also simplifies the
device tree.

Although it fixes iommu assignment issue, it also break compatibility
with old device tree. So, the patch in driver is needed to iterate over
sibling mdp device nodes, not child ones, to keep driver work properly.
Signed-off-by: NMinghsiu Tsai <minghsiu.tsai@mediatek.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

That way we don't have to rely on userspace to inject the headers on IDR
requests, and there is always enough information to start decoding at an
I-frame.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement the V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME control to force IDR
frames. This is useful to implement VFU (Video Fast Update) on RTP
transmissions.
We already force an IDR frame at the beginning of each GOP to work
around a firmware bug on i.MX27, use the same mechanism to service IDR
requests from userspace.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The driver may sleep under a spin lock, and the function call path is:
snd_cx18_pcm_hw_free (acquire the lock by spin_lock_irqsave)
  vfree --> may sleep

To fix it, the "substream->runtime->dma_area" is passed to a temporary
value, and mark it NULL when holding the lock. The memory is freed by
vfree through the temporary value outside the lock holding.
Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com>
[hans.verkuil@cisco.com: removed unnecessary 'if (dma_area)']
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>