- 02 9月, 2015 7 次提交
-
-
由 Don Skidmore 提交于
When the device is closing or suspending, call ixgbe_enter_lplu to enter low power link up state on devices that support it. When this is done, prevent the phy from being reset in the ixgbe_down path so that link is present when calling ixgbe_enter_lplu. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
Add support for VXLAN RX offloads for the X55x devices that support them. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
By using GSO for UDP-encapsulated packets, all ixgbe devices can be directed to generate checksums for the inner headers because the outer UDP checksum can be zero. So point the machinery at the inner headers and have the hardware generate the checksum. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
Wait up to about 100 us for FDIRCMD writes to complete and return failure indications. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
There are various reasons why this method may or may not need to be defined and some of these we don't know until runtime. So we will set the value in get_invariants. Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch adds a support function that will indicate for the existence of management FW. Signed-off-by: NDonald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This fixes bugs where the port is not receiving multicast or VLAN tagged packets when in promiscuous mode. This can occur when a SW bridge is created on top of the device. This also fixes issues where the promiscuous behavior setting was not being preserved across a reset caused by features being enabled or disabled. We are using defport instead of doing a true promiscuous mode because we do not need to receive the SRIOV or VMDq VSI directed traffic which would suck up bandwidth and is really not intended for the SW bridge. In addition, with defport we get VLAN promiscuous behavior which is not possible from the VSI level promiscuous setting. Change-ID: Ie21985eac32d5af1c02e9d71c6430a90d5bab40f Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 27 8月, 2015 14 次提交
-
-
由 Catherine Sullivan 提交于
Bump version and update the copyright year for i40evf. Change-ID: Iddb81b9dba09f0dc57ab54937b5821ecdd721ff6 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
Store the CEE TLV status returned by firmware to allow drivers to dump that for debug purposes. Change-ID: Ie3c4cf8cebabee4f15e1e3fdc4fc8a68bbca40ee Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Add virtual channel offload capability to support RX polling mode in the VF. Change-ID: Ib643ae2a7506dfc75fc489fc207493fabefa4832 Signed-off-by: NJingjing Wu <jingjing.wu@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The kernel notifies all VXLAN capable registered drivers, i.e. any driver that implements ndo_add_vxlan_port(), of the addition of a port so that the driver can track which ports are in use. There's no need to log this - it just fills the system log with useless and irksome noise. Also, when failing to init SR-IOV interfaces the driver was printing the same message twice. Just remove the inner printk and let the outer message catch enable as well as the other failures. Change-ID: Id5ecb1d425c2a357ee2bc1635dab24553831dade Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
There were quite a few issues when the wrong defines were getting used in the VF driver. This patch fixes the code where PF driver registers were getting used for VF driver, and also removes the registers that are not being used from the VF register file. Change-ID: If116a9730112950d006eb8ec763998fc914cc839 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Use CTLN1 instead of CTLN for the VF relative register space. Change-ID: Iefba63faf0307af55fec8dbb64f26059f7d91318 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Turns out that 'inavlid' is an inavlid spelling for 'invalid'. Change-ID: Ie1fe2d0f8d1ba75ab880594875ec2e4152a76f61 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The existing comment is incorrect. Add new comment to point out that the PF reset does not affect link but if the reset is changed to a different type that does affect link then the link test would need to be moved to before the reset. Change-ID: I28d786f46e9465860babdee61c1dba51016464df Reported-by: NJeremiah Kyle <jeremiah.kyle@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
This patch adds capability to update per VEB per TC statistics and dump it via ethtool. It also adds a structure to hold VEB per TC statistics. The fields can be filled by reading the GLVEBTC_* counters. Change-ID: I28b4759b9ab6ad5a61f046a1bc9ef6b16fe31538 Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Treat netqueues the same way we do virtual functions when someone wants to run the ethtool offline diagnostic test. Change-ID: Id48d2b933f1fd0db7be06305a93c6ebe3dc821f5 Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch fixes the driver flow to take into account legacy interrupts. Over time we added code that assumes MSIX is the only mode that the driver runs in. It also enables a legacy workaround to trigger SWINT when the TX ring has non-cache aligned descriptors pending and interrupts are disabled. We work with a single vector in MSI mode too, so apply the same restrictions as Legacy. Change-ID: I826ddff1f9bd45d2dbe11f56a3ddcef0dbf42563 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
We should be stopping the service task and flow director on shutdown not on suspension. Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The port.crc_errors is really an RX counter, so let's mark it as such. Change-ID: I179afd3f8a95d45229bb4163a6aeb01f0d2d250b Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Sparse cries when we compare an __le16 to a u16, almost like it cares about architectures other than x86. Weird. Use the le16_to_cpu macro to make it stop crying. Change-ID: Id068f4d7868a2d3df234a791a76d15938f37db35 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 22 8月, 2015 1 次提交
-
-
由 Michal Hocko 提交于
Commit c48a11c7 ("netvm: propagate page->pfmemalloc to skb") added checks for page->pfmemalloc to __skb_fill_page_desc(): if (page->pfmemalloc && !page->mapping) skb->pfmemalloc = true; It assumes page->mapping == NULL implies that page->pfmemalloc can be trusted. However, __delete_from_page_cache() can set set page->mapping to NULL and leave page->index value alone. Due to being in union, a non-zero page->index will be interpreted as true page->pfmemalloc. So the assumption is invalid if the networking code can see such a page. And it seems it can. We have encountered this with a NFS over loopback setup when such a page is attached to a new skbuf. There is no copying going on in this case so the page confuses __skb_fill_page_desc which interprets the index as pfmemalloc flag and the network stack drops packets that have been allocated using the reserves unless they are to be queued on sockets handling the swapping which is the case here and that leads to hangs when the nfs client waits for a response from the server which has been dropped and thus never arrive. The struct page is already heavily packed so rather than finding another hole to put it in, let's do a trick instead. We can reuse the index again but define it to an impossible value (-1UL). This is the page index so it should never see the value that large. Replace all direct users of page->pfmemalloc by page_is_pfmemalloc which will hide this nastiness from unspoiled eyes. The information will get lost if somebody wants to use page->index obviously but that was the case before and the original code expected that the information should be persisted somewhere else if that is really needed (e.g. what SLAB and SLUB do). [akpm@linux-foundation.org: fix blooper in slub] Fixes: c48a11c7 ("netvm: propagate page->pfmemalloc to skb") Signed-off-by: NMichal Hocko <mhocko@suse.com> Debugged-by: NVlastimil Babka <vbabka@suse.com> Debugged-by: NJiri Bohac <jbohac@suse.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Acked-by: NMel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 8月, 2015 15 次提交
-
-
由 Jacob Keller 提交于
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
Simplify port-specific macros by eliminating explicit comparison with 0. More importantly, enclose formal parameter in parens to eliminate the risk of an operator precedence surprise. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
Recent changes to igb_probe_vfs() could lead to the PF holding onto all of the queues. Reorder igb_probe_vfs() to be before gb_init_queue_configuration() and add some more error checking. Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Stefan Assmann 提交于
The driver doesn't clear buffer_info->dma after calling dma_unmap_single() in all cases. This has been discovered by changing the mtu twice, which caused the following backtrace. [ 68.569280] WARNING: CPU: 2 PID: 1860 at drivers/iommu/intel-iommu.c:3517 intel_unmap+0x20c/0x220() [ 68.579392] Driver unmaps unmatched page at PFN fffc2a40 [ 68.585322] Modules linked in: igbvf ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat kvm_intel kvm igb megs [ 68.599163] CPU: 2 PID: 1860 Comm: ifconfig Not tainted 4.2.0-rc4+ #147 [ 68.606543] Hardware name: IBM -[546025Z]-/00Y7630, BIOS -[VVE134TUS-1.51]- 10/17/2013 [ 68.615473] 0000000000000dbd ffff88046441bb08 ffffffff81a5ad0b ffffffff81e2f9ea [ 68.623775] ffff88046441bb58 ffff88046441bb48 ffffffff81056b55 ffff88047fc583c0 [ 68.632075] 0000000000000000 ffff880469a8e600 00000000fffc2a40 ffff880465b32098 [ 68.640375] Call Trace: [ 68.643109] [<ffffffff81a5ad0b>] dump_stack+0x48/0x5d [ 68.648844] [<ffffffff81056b55>] warn_slowpath_common+0x95/0xe0 [ 68.655549] [<ffffffff81056c56>] warn_slowpath_fmt+0x46/0x70 [ 68.661960] [<ffffffff8158a614>] ? find_iova+0x54/0x90 [ 68.667791] [<ffffffff815988dc>] intel_unmap+0x20c/0x220 [ 68.673815] [<ffffffff8159891e>] intel_unmap_page+0xe/0x10 [ 68.680038] [<ffffffffa0067536>] igbvf_clean_rx_ring+0x96/0x370 [igbvf] [ 68.687516] [<ffffffffa0067915>] igbvf_down+0x105/0x110 [igbvf] [ 68.694219] [<ffffffffa0067beb>] igbvf_change_mtu+0x16b/0x180 [igbvf] [...] Signed-off-by: NStefan Assmann <sassmann@kpanic.de> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jia-Ju Bai 提交于
In error handling code of igb_probe, the memory adapter->shadow_vfta allocated by kcalloc in igb_sw_init is not freed. So when register_netdev or igb_init_i2c is failed, a memory leak will occur. This patch adds kfree to fix it. Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jia-Ju Bai 提交于
When e1000e_setup_rx_resources is failed in e1000_open, e1000e_free_tx_resources in "err_setup_rx" segment is executed. "writel(0, tx_ring->head)" statement in e1000_clean_tx_ring in e1000e_free_tx_resources will cause a null poonter dereference(crash), because "tx_ring->head" is only assigned in e1000_configure_tx in e1000_configure, but it is after e1000e_setup_rx_resources. This patch moves head/tail register writing to e1000_configure_tx/rx, which can fix this problem. It is inspired by igb_configure_tx_ring in the igb driver. Specially, thank Alexander Duyck for his valuable suggestion. Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jia-Ju Bai 提交于
When igb_init_interrupt_scheme in igb_sriov_reinit is failed, the lock acquired by rtnl_lock() is not released, which causes a deadlock. This patch adds rtnl_unlock() in error handling to fix it. Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jia-Ju Bai 提交于
When pci_dma_mapping_error in e100_xmit_prepare is failed, the skb buffer allocated by netdev_alloc_skb_ip_align in e100_rx_alloc_skb is not released, which causes a possible resource leak. This patch adds error handling code to fix it. Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jia-Ju Bai 提交于
The driver lacks the check of nic->cbs_pool after pci_pool_create in e100_probe. When this function is failed, a null pointer dereference occurs when pci_pool_alloc uses nic->cbs_pool in e100_alloc_cbs. This patch adds a check and related error handling code to fix it. Signed-off-by: NJia-Ju Bai <baijiaju1990@163.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alex Williamson 提交于
When the .remove() callback for a PF is called, SR-IOV support for the device is disabled, which requires unbinding and removing the VFs. The VFs may be in-use either by the host kernel or userspace, such as assigned to a VM through vfio-pci. In this latter case, the VFs may be removed either by shutting down the VM or hot-unplugging the devices from the VM. Unfortunately in the case of a Windows 2012 R2 guest, hot-unplug is broken due to the ordering of the PF driver teardown. Disabling SR-IOV prior to unregister_netdev() avoids this issue. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
This patch adds support for Marvell PHY 1512 (required for I354). Submitted by: Maciej Szwed <maciej.szwed@intel.com> Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Richard Cochran 提交于
In addition to interrupt driven target time output events, the i210 also has two programmable clock outputs. These clocks support periods between 16 nanoseconds and 140 milliseconds. This patch implements the periodic output function using the clock outputs when possible, falling back to the target time for longer periods. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Stefan Assmann 提交于
During driver probing the following code path is triggered. igb_probe ->igb_sw_init ->igb_probe_vfs ->igb_pci_enable_sriov ->igb_sriov_reinit Doing the SR-IOV re-init is not necessary during probing since we're starting from scratch. Here we can call igb_enable_sriov() right away. Running igb_sriov_reinit() during igb_probe() also seems to cause occasional packet loss on some onboard 82576 NICs. Reproduced on Dell and HP servers with onboard 82576 NICs. Example: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Dell Device [1028:0481] Signed-off-by: NStefan Assmann <sassmann@kpanic.de> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vasily Averin 提交于
Signed-off-by: NVasily Averin <vvs@virtuozzo.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shota Suzuki 提交于
When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is set if adapter->rss_queues exceeds half of max_rss_queues in igb_init_queue_configuration(). On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of queues exceeds half of max_combined in igb_set_channels() when changing the number of queues by "ethtool -L". In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size of adapter->msix_entries[], an overflow can occur in igb_set_interrupt_capability(), which in turn leads to an oops. Fix this problem as follows: - When changing the number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver. - When increasing the size of q_vector, reallocate it appropriately. (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.) Another possible way to fix this problem is to cap the queues at its initial number, which is the number of the initial online cpus. But this is not the optimal way because we cannot increase queues when another cpu becomes online. Note that before commit cd14ef54 ("igb: Change to use statically allocated array for MSIx entries"), this problem did not cause oops but just made the number of queues become 1 because of entering msi_only mode in igb_set_interrupt_capability(). Fixes: 907b7835 ("igb: Add ethtool support to configure number of channels") CC: stable <stable@vger.kernel.org> Signed-off-by: NShota Suzuki <suzuki_shota_t3@lab.ntt.co.jp> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 8月, 2015 3 次提交
-
-
由 Raanan Avargil 提交于
Signed-off-by: NRaanan Avargil <raanan.avargil@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Raanan Avargil 提交于
Change the algorithm. Read systimel twice and check for overflow. If there was no overflow, use the first value. If there was an overflow, read systimeh again and use the second systimel value. Signed-off-by: NRaanan Avargil <raanan.avargil@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Raanan Avargil 提交于
This patch fixes wrong locking usage. In the context of slot reset, we should use lock. And during resume, there is no need of lock. Reported-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NRaanan Avargil <raanan.avargil@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-