- 02 7月, 2011 4 次提交
-
-
由 Russ Gorby 提交于
The gsm_mux is created/destroyed when ldisc is opened/closed but clients of the MUX channel devices (gsmttyN) may access this structure as long as the TTYs are open. For the open, the ldisc open is guaranteed to preceed the TTY open, but the close has no such guaranteed ordering. As a result, the gsm_mux can be freed in the ldisc close before being accessed by one of the TTY clients. This can happen if the ldisc is removed while there are open, active MUX channels. A similar situation exists for DLCI-0, it is basically a resource shared by MUX and DLCI , and should not be freed while they can be accessed To avoid this, gsm_mux and dlcis now have a reference counter ldisc open takes a reference on the mux and all the dlcis gsmtty_open takes a reference on the mux, dlci0 and its specific dlci. Dropping the last reference initiates the actual free. Signed-off-by: NRuss Gorby <russ.gorby@intel.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Russ Gorby 提交于
This patch adds the ability to open a network data connection over a mux virtual tty channel. This is for modems that support data connections with raw IP frames instead of PPP. On high speed data connections this eliminates a significant amount of PPP overhead. To use this interface, the application must first tell the modem to open a network connection on a virtual tty. Once that has been accomplished, the app will issue an IOCTL on that virtual tty to create the network interface. The IOCTL will return the index of the interface created. The two IOCTL commands are: ioctl( fd, GSMIOC_ENABLE_NET ); ioctl( fd, GSMIOC_DISABLE_NET ); Signed-off-by: NRuss Gorby <russ.gorby@intel.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Russ Gorby 提交于
The n_gsm driver being an ldisc, does not provide a convenient method e.g. udev to create the tty device nodes automatically when the ldisc is opened. The TTY device nodes are now created via calls to tty_register_device from the ldisc open. Signed-off-by: NRuss Gorby <russ.gorby@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomoya MORINAGA 提交于
Register "interrupt delay value" is for GbE which is connected to Bus-m of PCIe. However currently, the value is set for Bus-n. As a result, the value is not set correctly. This patch moves setting the value processing of Bus-n to Bus-m. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 6月, 2011 7 次提交
-
-
由 Jiri Slaby 提交于
With virtual machines like qemu, it's pretty common to see "too much work for irq4" messages nowadays. This happens when a bunch of output is printed on the emulated serial console. This is caused by too low PASS_LIMIT. When ISR loops more than the limit, it spits the message. I've been using a kernel with doubled the limit and I couldn't see no problems. Maybe it's time to get rid of the message now? Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Reed 提交于
The purpose of the patch is to add EEH support to the 8250_PCI driver for the IBM/Digi PCIE 2port Async EIA-232 Adapter that uses a PLX chipset on the PPC platforrm. Basic support for this adapter was recently added https://lkml.org/lkml/2011/5/11/341 This patch was created against the linux-next kernel Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: Scott Kilau <scottk@digi.com> Signed-off-by: NMichael Reed <mreed@linux.vnet.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Florian Fainelli 提交于
Since commit (4564f9e5: consolidate line discipline number definitions) the patch moved all line discipline number from a per-architecture termios.h to a shared one: tty.h. However, prior to this consolidation work, the line discipline numbers were outside of an ifdef __KERNEL__/endif block so these numbers used to be exported to user-space. Since such numbers are kernel ABI anyway, and tty.h is already included for user- space header processing, just move these relevant defines outside of the ifdef __KERNEL__/endif block in include/linux/tty.h. CC: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr> Acked-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Frédéric Brière 提交于
Timedia/SUNIX PCI cards with both serial and parallel ports are currently supported by 8250_pci and parport_pc individually. Moving that support into parport_serial allows using both types of ports at the same time. This was successfully tested with a SUNIX 4079T. Signed-off-by: NFrédéric Brière <fbriere@fbriere.net> Acked-by: NAlan Cox <alan@linux.intel.com> Cc: linux-serial@vger.kernel.org Cc: linux-parport@lists.infradead.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Frédéric Brière 提交于
This function, if present, is called early on by the 8250_pci probe; it can be used to reject devices meant for parport_serial. (The .init function cannot be used for this purpose, as it is also called by parport_serial.) Signed-off-by: NFrédéric Brière <fbriere@fbriere.net> Acked-by: NAlan Cox <alan@linux.intel.com> Cc: linux-serial@vger.kernel.org Cc: linux-parport@lists.infradead.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nicos Gollan 提交于
Add I/O based support for serial and parallel ports of the following chips: Vendor: Moschip (0x9710) Parts (device IDs) * 9900 (0x9900) * 9904 (0x9904 * 9901 (0x9912, also sold as 9912) * 9922 (0x9922) On all chips but the 9900, a single port is provided per PCI subdevice (subvendor-ID 0xA000, subdevice-IDs 0x1000 for serial, 0x2000 for parallel with proper class codes). In cascading configurations, the 9900 provides two devices per subdevice, with subvendor-ID 0xA000 and subdevice-IDs 0x30ps where p is the number of parallel ports and s the number of serial ports. Basic testing was only done on the serial part of a 9912 to the point where it can be used for a serial kernel console, and advanced features are completely untested. It is possible to reduce functionality of the chips by adding a configuration EEPROM, and the datasheet [1] is inconsistent w.r.t subdevices in the 4s+2s1p and 2s1p+4s configurations. The subdevice-ID 0x3012 should likely read 0x3011 with a serial port in function 3, which would be consistent with the BAR layouts. For now, the drivers ignore subdevices with ID 0x1000 and no class code. The parallel ports are integrated in parport_serial even for purely parallel parts to reduce the footprint of the patch. [1] http://www.moschip.com/data/products/MCS9900/MCS9900_Datasheet.pdfSigned-off-by: NNicos Gollan <gtdev@spearhead.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 6月, 2011 5 次提交
-
-
由 Linus Torvalds 提交于
-
由 Hugh Dickins 提交于
Al Viro observes that in the hugetlb case, handle_mm_fault() may return a value of the kind ENOSPC when its caller is expecting a value of the kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns. Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb - turn off de-emphasis in s/pdif for cm6206 ALSA: asihpi: Use angle brackets for system includes ALSA: fm801: add error handling if auto-detect fails ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd() ALSA: 6fire: Don't leak firmware in error path ASoC: Fix wm_hubs input PGA ZC bits ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (max6642): Better chip detection schema hwmon: (coretemp) Further relax temperature range checks hwmon: (coretemp) Fix TjMax detection for older CPUs hwmon: (coretemp) Relax target temperature range check hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault
-
由 Takashi Iwai 提交于
-
- 05 6月, 2011 4 次提交
-
-
git://android.git.kernel.org/kernel/tegra由 Linus Torvalds 提交于
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: Tegra: Harmony: Fix conflicting GPIO numbering
-
由 Stephen Warren 提交于
Currently, both the WM8903 and TPS6586x chips attempt to register with gpiolib using the same GPIO numbers. This causes the audio driver to fail to initialize. To solve this, add a define to board-harmony.h for the TPS6586x, and make board-harmony-power.c use this define, instead of directly referencing TEGRA_NR_GPIOS. This fixes a regression introduced by commit 6f168f2f. ARM: tegra: harmony: initialize the TPS65862 PMIC Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NColin Cross <ccross@android.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) btrfs: fix uninitialized variable warning btrfs: add helper for fs_info->closing Btrfs: add mount -o inode_cache btrfs: scrub: add explicit plugging btrfs: use btrfs_ino to access inode number Btrfs: don't save the inode cache if we are deleting this root btrfs: false BUG_ON when degraded Btrfs: don't save the inode cache in non-FS roots Btrfs: make sure we don't overflow the free space cache crc page Btrfs: fix uninit variable in the delayed inode code btrfs: scrub: don't reuse bios and pages Btrfs: leave spinning on lookup and map the leaf Btrfs: check for duplicate entries in the free space cache Btrfs: don't try to allocate from a block group that doesn't have enough space Btrfs: don't always do readahead Btrfs: try not to sleep as much when doing slow caching Btrfs: kill BTRFS_I(inode)->block_group Btrfs: don't look at the extent buffer level 3 times in a row Btrfs: map the node block when looking for readahead targets Btrfs: set range_start to the right start in count_range_bits ...
-
由 Per Dalén 提交于
Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: NPer Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 04 6月, 2011 20 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ...
-
由 David Sterba 提交于
With Linus' tree, today's linux-next build (powercp ppc64_defconfig) produced this warning: fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode': fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used uninitialized in this function Introduced by commit 16cdcec7 ("btrfs: implement delayed inode items operation"). This fixes a bug in btrfs_update_inode(): if the returned value from btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not updated and several call paths may hit a BUG_ON or fail with strange code. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 David Sterba 提交于
wrap checking of filesystem 'closing' flag and fix a few missing memory barriers. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 Chris Mason 提交于
This makes the inode map cache default to off until we fix the overflow problem when the free space crcs don't fit inside a single page. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Arne Jansen 提交于
With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 David Sterba 提交于
commit 4cb5300b ("Btrfs: add mount -o auto_defrag") accesses inode number directly while it should use the helper with the new inode number allocator. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
With xfstest 254 I can panic the box every time with the inode number caching stuff on. This is because we clean the inodes out when we delete the subvolume, but then we write out the inode cache which adds an inode to the subvolume inode tree, and then when it gets evicted again the root gets added back on the dead roots list and is deleted again, so we have a double free. To stop this from happening just return 0 if refs is 0 (and we're not the tree root since tree root always has refs of 0). With this fix 254 no longer panics. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Tested-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Arne Jansen 提交于
In degraded mode the struct btrfs_device of missing devs don't have device->name set. A kstrdup of NULL correctly returns NULL. Don't BUG in this case. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
This adds extra checks to make sure the inode map we are caching really belongs to a FS root instead of a special relocation tree. It prevents crashes during balancing operations. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The free space cache uses only one page for crcs right now, which means we can't have a cache file bigger than the crcs we can fit in the first page. This adds a check to enforce that restriction. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The nitems counter needs to start at zero Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Arne Jansen 提交于
The current scrub implementation reuses bios and pages as often as possible, allocating them only on start and releasing them when finished. This leads to more problems with the block layer than it's worth. The elevator gets confused when there are more pages added to the bio than bi_size suggests. This patch completely rips out the reuse of bios and pages and allocates them freshly for each submit. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Maosn <chris.mason@oracle.com>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-block: block: Use hlist_entry() for io_context.cic_list.first cfq-iosched: Remove bogus check in queue_fail path xen/blkback: potential null dereference in error handling xen/blkback: don't call vbd_size() if bd_disk is NULL block: blkdev_get() should access ->bd_disk only after success CFQ: Fix typo and remove unnecessary semicolon block: remove unwanted semicolons Revert "block: Remove extra discard_alignment from hd_struct." nbd: adjust 'max_part' according to part_shift nbd: limit module parameters to a sane value nbd: pass MSG_* flags to kernel_recvmsg() block: improve the bio_add_page() and bio_add_pc_page() descriptions
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: strncpy: fix handling of zero lengths
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: asm-generic/unistd.h: support sendmmsg syscall tile: enable CONFIG_BUGVERBOSE
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix-up free space earlier UBIFS: intialize LPT earlier UBIFS: assert no fixup when writing a node UBIFS: fix clean znode counter corruption in error cases UBIFS: fix memory leak on error path UBIFS: fix shrinker object count reports UBIFS: fix recovery broken by the previous recovery fix UBIFS: amend ubifs_recover_leb interface UBIFS: introduce a "grouped" journal head flag UBIFS: supress false error messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Ignore unset values of the minconfig in config_bisect ktest: Fix result of rebooting the kernel ktest: Fix off-by-one in config bisect result
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: add DMAC clock definitions on SH7372 ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO sh_mobile_meram: MERAM platform data for LCDC
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: dmaengine: shdma: fix a regression: initialise DMA channels for memcpy dmaengine: shdma: Fix up fallout from runtime PM changes. Revert "clocksource: sh_cmt: Runtime PM support" Revert "clocksource: sh_tmu: Runtime PM support" sh: Fix up asm-generic/ptrace.h fallout. sh64: Move from P1SEG to CAC_ADDR for consistent sync. sh64: asm/pgtable.h needs asm/mmu.h sh: asm/tlb.h needs linux/swap.h sh: mark DMA slave ID 0 as invalid sh: Update shmin to reflect PIO dependency. sh: arch/sh/kernel/process_32.c needs linux/prefetch.h. sh: add MMCIF runtime PM support on ecovec sh: switch ap325rxa to dynamically manage the platform camera
-