Since get_settings() returns a signed int and it gets checked
for < 0 to catch an error, res should be a signed int too.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

No need to record this information in source code, its all in the git
repository, and kernel archives.

Bonding source files still have changelogs in the comments.  This, then,
is an update to that changelog.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Minor spelling and whitespace corrections.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This large patch adds sysfs functionality to the channel bonding module.
Bonds can be added, removed, and reconfigured at runtime without having
to reload the module.  Multiple bonds with different configurations are
easily configured, and ifenslave is no longer required to configure bonds.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Make the /proc files show which ARP targets are in use by each bond.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

With the sysfs interface, the user can remove entries from the ARP table
at runtime.  The ARP monitor code now allows for empty entries in the
table.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The sysfs interface can create bonds at runtime, and __init code goes away
after module init.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The sysfs interface can create bonds at runtime, so we need a separate
function to do this, instead of just doing it in the module init code.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The sysfs code needs access these functions, so make them
not static, and move the protos to the header file.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The sysfs code needs to know what these structs look like, so make them
not static, and move the definition to the header.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Take the primary slave name shown in /proc from the actual slave dev
instead of from the command-line parameter, which won't be present
if the bond is created via sysfs.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Adds information about the recently-added transmit policy setting to each
bond's /proc file.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Expand and correct the parameter descriptions shown by modinfo.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add the bond name to all error messages so we can tell which one is
complaining.  Also reformats some error messages to be more consistent.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This should resolve http://bugzilla.kernel.org/show_bug.cgi?id=5519

The current feature computation loses bits that it doesn't know about,
resulting in an inability to add VLANs and possibly other havoc.
Rewrote function to preserve bits it doesn't know about, remove an
unneeded state variable, and simplify the code.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Expand comment explaining MAC address selection for replicated IGMP
frames transmitted in bonding mode 1 (active-backup).  Also, a small
whitespace cleanup.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

 - added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix implicit nocast warnings in bonding code:
drivers/net/bonding/bond_main.c:1302:49: warning: implicit cast to nocast type
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replicate IGMP frames across all slaves in activebackup mode. This
ensures fail-over is rapid for multicast traffic as well. Otherwise,
multicast traffic will be lost until the next IGMP membership report
poll timeout.

This is conceptually similar to the treatment of IGMP traffic in
bond_alb_xmit. In that case, IGMP traffic transmitted on any slave
is re-routed to the active slave in order to ensure that multicast
traffic continues to be directed to the active receiver.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

David S. Miller <davem@davemloft.net> wrote:
>I think removing support for older ifenslave binaries is
>the least painful solution to this problem.

	This patch removes backwards compatibility for old ifenslave
binaries (ifenslave prior to verison 1.0.0).

	I did not similarly modify ifenslave itself; with sysfs on the
horizon, I don't see that as being worthwhile.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

The following patch renames __in_dev_get() to __in_dev_get_rtnl() and
introduces __in_dev_get_rcu() to cover the second case.

1) RCU with refcnt should use in_dev_get().
2) RCU without refcnt should use __in_dev_get_rcu().
3) All others must hold RTNL and use __in_dev_get_rtnl().

There is one exception in net/ipv4/route.c which is in fact a pre-existing
race condition.  I've marked it as such so that we remember to fix it.

This patch is based on suggestions and prior work by Suzanne Wood and
Paul McKenney.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix bond_enslave link monitoring warning to check use_carrier status
and ethtool_ops in addition to do_ioctl.  This version checks ethtool_ops
as well as do_ioctl, and also uses the per-bond params.use_carrier
instead of the global use_carrier.
Signed-off-by: NJason R. Martin <nsxfreddy@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

From: Florin Malita <fmalita@gmail.com>

bond_init() is not releasing rtnl_sem after register_netdevice() and before
calling unregister_netdevice() (from bond_free_all()) in the exception
path.  As the device registration is not completed (dev->reg_state ==
NETREG_REGISTERING), the call to unregister_netdevice() triggers
BUG_ON(dev->reg_state != NETREG_REGISTERED).
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	Bonding leaks route structures when the ARP monitor is
configured to send probes over VLANs.

	Originally reported by Ian Abel <ian.abel@mxtelecom.com>; his
original fix was modified by Jay Vosburgh to correct coding style and to
close a leak it missed.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This change allows a bonding device to inherit the "zero-copy"
features of its slave devices.

It was inspired by a couple of previous postings on this topic:
http://marc.theaimsgroup.com/?l=bonding-devel&m=111924607327794&w=2
http://marc.theaimsgroup.com/?l=bonding-devel&m=111925242706297&w=2
and it's largely a combination of the patches that appear in those
emails.
Signed-off-by: NArthur Kepner <akepner@sgi.com>

Add support for alternate slave selection algorithms to bonding
balance-xor and 802.3ad modes.  Default mode (what we have now: xor of
MAC addresses) is "layer2", new choice is "layer3+4", using IP and port
information for hashing to select peer.

Originally submitted by Jason Gabler for balance-xor mode;
modified by Jay Vosburgh to additionally support 802.3ad mode.  Jason's
original comment is as follows:

The attached patch to the Linux Etherchannel Bonding driver modifies the
driver's "balance-xor" mode as follows:

      - alternate hashing policy support for mode 2
        * Added kernel parameter "xmit_policy" to allow the specification
          of different hashing policies for mode 2.  The original mode 2
          policy is the default, now found in xmit_hash_policy_layer2().
        * Added xmit_hash_policy_layer34()

This patch was inspired by hashing policies implemented by Cisco,
Foundry and IBM, which are explained in
Foundry documentation found at:
http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750Signed-off-by: NJason Gabler <jygabler@lbl.gov>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>

Add support for generating gratuitous ARPs in bonding
active-backup mode when failovers occur.  Includes support for VLAN
tagging the ARPs as needed.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>

Correcting the list traversal makes the problem go away.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!