When firmware 1.20 was introduced, the dib0700 switched from a polling model
using a USB control message, to the messages being delivered on a USB bulk
pipe.  The code I originally added would do a blocking read on the pipe with a
50ms timeout.  Because the dvb-usb-remote code makes use of the global
workqueue, this resulted in the global workqueue being blocked 50% of the
time.  Also, the synchronous urb_bulk_msg() call would burn excess CPU time
(reflected as an abnormal increase in the system's load average when devices
were connected).

Rework the logic so that we now setup an asynchronous callback on the bulk
pipe, so that we now only handle RC data when it arrives on the pipe.  Note
that we provide a stub function for the RC polling callback so that we can
continue to leverage the shared code in dvb-usb-rc for the setting up of the
input device.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add parameter to change the buffer size. This buffer size is specified
in number of Ts packet. This parameter is stored inside the state.

For firmware higher than 1.21, the xfer buffer size can be changed
inside the dib0700 usb bridge the firware version is stored inside the
state
Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Data debug for i2c transactions was provided by the functions
called by dib0700_i2c_xfer_legacy, but not dib0700_i2c_xfer_new.

This patch adds the missing data debug dumps to dib0700_i2c_xfer_new.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make it clear that the address is in hex format.
Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The format for reading the IR controller changed in firmware 1.20.  It now
provides the events on bulk endpoint 1 instead of using a control request.

Support the new format, providing backward compatibility for users who might
be using older firmware.

Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing the
required information on how the version 1.20 firmware works.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a)

Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue with the i2c that prevented the xc5000 from working.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's
i2c implementation where it did not properly support a single i2c read request
(sending it as an i2c write request instead).  Version 1.20 of the firmware
added support for a new i2c API which supported such requests.

This change defaults to fw 1.20 for all devices, but does not default to using
the new i2c API (since initial testing suggests problems interacting with the
mt2060).  Maintainers can enable the use of the new i2c API by putting
the following into their frontend initialization:

struct dib0700_state *st = adap->dev->priv;
st->fw_use_new_i2c_api = 1;

Also note that the code expects i2c repeated start to be supported.  If the
i2c slave does not support repeated start, i2c messsages should have the
I2C_M_NOSTART flag set.

Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue as well as example i2c code utilizing the interface.
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The adapter_nr module options can be used to allocate static adapter
numbers on a driver level. It avoids problems with changing DVB apapter
numbers after warm/cold boot or device unplugging and repluging.

Each driver holds DVB_MAX_ADAPTER long array of the preferred order of
adapter numbers.

options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a
reversed allocation of adapter numbers.

With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If
both are already in use it will allocate the lowest free adapter number.
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Acked-by: NHermann Pitton <hermann.pitton@arcor.de>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch enables support for repeating last event when a key is holded
down with dib0700 devices. It works with rc5 and nec remotes.
It also fixes an annoying bug that floods kernel log with "Unknown key"
messages after each keypress. This happened because the driver was not
resetting infrared register after each poll so it kept polling last key
even if nothing was being pressed. Fixing this, (calling rc_setup after
each poll), permits to implement key repeat.

Signed-off-by: Filippo Argiolas <filippo.argiolas at gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The new firmware returns the data of the REQUEST_POLL_RC request in
reversed order. The default is RC5, but it can be adjusted using a
module parameter.
Signed-off-by: NJanne Grunau <janne-dvb@grunau.be>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add initial support for Dual-DVB-T stick based on DiB7700 and MT2266

- Microtune MT2266 driver.
- Preliminary support for these dual tuner devices :
  - Pinnacle Dual DVB-T diversity
  - Terratec Cinergy DT USB XS diversity
  - Hauppauge Nova TD USB
Signed-off-by: NOlivier DANET <odanet@caramail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When trying to use a Hauppauge Nova-T Stick on a big-endian architecture
(such as powerpc) no frontend can be attached.
The attached patch fixes this problem by removing two lines in
dib0700_ctrl_rd() that try to correct the endianess on two values that
already are correct:
-       /* think about swapping here */
-       value = le16_to_cpu(value);
-       index = le16_to_cpu(index);
With this simple patch this dvb hardware works great, thanks to anyone
involved for the good work. :)
Signed-off-by: NDennis Ranke <mail@exoticorn.de>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains support for the DiB7000PC-driver.
Signed-off-by: NFrancois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- forward the clock to the slave undivided
- when sleeping the 3000 do not shutdown the clock
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Several fixes for dib0700-module. (Firmware error checking, dependency)
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T).
It adds correct AGC setting for the 3000P, correct firmware download state
detection.
Additionally it fixes the mt2060-driver to be able to be used with dvb_attach.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added module for DiB0700 based USB devices. This module is preliminary and
untested (because of a lack of test devices) but should work.
Further commits will be necessary to make it work properly.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>