Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 11月, 2011 5 次提交
    • P
      ip_vs.h: fix implicit use of module_get/module_put from module.h · 69e7dae4
      由 Paul Gortmaker 提交于 
      This file was using the module get/put functions in two simple inline
functions.  But module_get/put were only within scope because of
the implicit presence of module.h being everywhere.

Rather than add module.h to another file in include/  -- which is
exactly the thing we are trying to avoid, simply convert these
one-line functions into a define, as per what was done for the
device_schedule_callback() in commit 523ded71.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      69e7dae4
    • P
      nf_conntrack.h: fix up fallout from implicit moduleparam.h presence · 34641c6d
      由 Paul Gortmaker 提交于 
      The implicit presence of module.h everywhere meant that this header
also was getting moduleparam.h which defines struct kernel_param.

Since it only needs to know that kernel_param is a struct, call that
out instead of adding an include of moduleparam.h -- to get rid of this:

include/net/netfilter/nf_conntrack.h:316: warning: 'struct kernel_param' declared inside parameter list
include/net/netfilter/nf_conntrack.h:316: warning: its scope is only this definition or declaration, which is probably not what you want
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      34641c6d
    • P
      include: replace linux/module.h with "struct module" wherever possible · de477254
      由 Paul Gortmaker 提交于 
      The <linux/module.h> pretty much brings in the kitchen sink along
with it, so it should be avoided wherever reasonably possible in
terms of being included from other commonly used <linux/something.h>
files, as it results in a measureable increase on compile times.

The worst culprit was probably device.h since it is used everywhere.
This file also had an implicit dependency/usage of mutex.h which was
masked by module.h, and is also fixed here at the same time.

There are over a dozen other headers that simply declare the
struct instead of pulling in the whole file, so follow their lead
and simply make it a few more.

Most of the implicit dependencies on module.h being present by
these headers pulling it in have been now weeded out, so we can
finally make this change with hopefully minimal breakage.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      de477254
    • P
      net: sch_generic remove redundant use of <linux/module.h> · 39aa9fdd
      由 Paul Gortmaker 提交于 
      This file has modular references, but they are limited to
those which are covered by the simple "struct module;"
declaration used in dozens of other places.  In fact that
declaration is already there (just outside of the context
of this commit) so simply remove the include line.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      39aa9fdd
    • P
      net: inet_timewait_sock doesnt need <linux/module.h> · 4ec65b8d
      由 Paul Gortmaker 提交于 
      There is nothing module specific in this header, and removing
it doesn't seem to uncover any implicit dependencies either.
Must be simply a vestige of an ancient legacy.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      4ec65b8d
  3. 25 10月, 2011 4 次提交
  5. 24 10月, 2011 3 次提交
  7. 22 10月, 2011 1 次提交
  9. 21 10月, 2011 2 次提交
  11. 19 10月, 2011 5 次提交
  13. 18 10月, 2011 1 次提交
  15. 15 10月, 2011 2 次提交
  17. 13 10月, 2011 1 次提交
  19. 12 10月, 2011 2 次提交
  21. 07 10月, 2011 3 次提交
  23. 04 10月, 2011 3 次提交
  25. 01 10月, 2011 8 次提交
    • J
      mac80211: document client powersave · 4b801bc9
      由 Johannes Berg 提交于 
      With the addition of uAPSD and driver buffering
the powersave handling has gotten quite complex.
Add a section to the documentation to explain it
for anyone wanting to implement it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      4b801bc9
    • J
      mac80211: allow out-of-band EOSP notification · 37fbd908
      由 Johannes Berg 提交于 
      iwlwifi has a separate EOSP notification from
the device, and to make use of that properly
it needs to be passed to mac80211. To be able
to mix with tx_status_irqsafe and rx_irqsafe
it also needs to be an "_irqsafe" version in
the sense that it goes through the tasklet,
the actual flag clearing would be IRQ-safe
but doing it directly would cause reordering
issues.

This is needed in the case of a P2P GO going
into an absence period without transmitting
any frames that should be driver-released as
in this case there's no other way to inform
mac80211 that the service period ended. Note
that for drivers that don't use the _irqsafe
functions another version of this function
will be required.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      37fbd908
    • J
      mac80211: explicitly notify drivers of frame release · 40b96408
      由 Johannes Berg 提交于 
      iwlwifi needs to know the number of frames that are
going to be sent to a station while it is asleep so
it can properly handle the uCode blocking of that
station.

Before uAPSD, we got by by telling the device that
a single frame was going to be released whenever we
encountered IEEE80211_TX_CTL_POLL_RESPONSE. With
uAPSD, however, that is no longer possible since
there could be more than a single frame.

To support this model, add a new callback to notify
drivers when frames are going to be released.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      40b96408
    • J
      mac80211: reply only once to each PS-poll · deeaee19
      由 Johannes Berg 提交于 
      If a PS-poll frame is retried (but was received)
there is no way to detect that since it has no
sequence number. As a consequence, the standard
asks us to not react to PS-poll frames until the
response to one made it out (was ACKed or lost).

Implement this by using the WLAN_STA_SP flags to
also indicate a PS-Poll "service period" and the
IEEE80211_TX_STATUS_EOSP flag for the response
packet to indicate the end of the "SP" as usual.

We could use separate flags, but that will most
likely completely confuse drivers, and while the
standard doesn't exclude simultaneously polling
using uAPSD and PS-Poll, doing that seems quite
problematic.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      deeaee19
    • J
      mac80211: implement uAPSD · 47086fc5
      由 Johannes Berg 提交于 
      Add uAPSD support to mac80211. This is probably not
possible with all devices, so advertising it with
the cfg80211 flag will be left up to drivers that
want it.

Due to my previous patches it is now a fairly
straight-forward extension. Drivers need to have
accurate TX status reporting for the EOSP frame.
For drivers that buffer themselves, the provided
APIs allow releasing the right number of frames,
but then drivers need to set EOSP and more-data
themselves. This is documented in more detail in
the new code itself.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      47086fc5
    • J
      mac80211: allow releasing driver-buffered frames · 4049e09a
      由 Johannes Berg 提交于 
      If there are frames for a station buffered in
the driver, mac80211 announces those in the TIM
IE but there's no way to release them. Add new
API to release such frames and use it when the
station polls for a frame.

Since the API will soon also be used for uAPSD
it is easily extensible.

Note that before this change drivers announcing
driver-buffered frames in the TIM bit actually
will respond to a PS-Poll with a potentially
lower priority frame (if there are any frames
buffered in mac80211), after this patch a driver
that hasn't been changed will no longer respond
at all. This only affects ath9k, which will need
to be fixed to implement the new API.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      4049e09a
    • J
      mac80211: split PS buffers into ACs · 948d887d
      由 Johannes Berg 提交于 
      For uAPSD support we'll need to have per-AC PS
buffers. As this is a major undertaking, split
the buffers before really adding support for
uAPSD. This already makes some reference to the
uapsd_queues variable, but for now that will
never be non-zero.

Since book-keeping is complicated, also change
the logic for keeping a maximum of frames only
and allow 64 frames per AC (up from 128 for a
station).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      948d887d
    • J
      mac80211: let drivers inform it about per TID buffered frames · 042ec453
      由 Johannes Berg 提交于 
      For uAPSD implementation, it is necessary to know on
which ACs frames are buffered. mac80211 obviously
knows about the frames it has buffered itself, but
with aggregation many drivers buffer frames. Thus,
mac80211 needs to be informed about this.

For now, since we don't have APSD in any form, this
will unconditionally set the TIM bit for the station
but later with uAPSD only some ACs might cause the
TIM bit to be set.

ath9k is the only driver using this API and I only
modify it in the most basic way, it won't be able
to implement uAPSD with this yet. But it can't do
that anyway since there's no way to selectively
release frames to the peer yet.

Since drivers will buffer frames per TID, let them
inform mac80211 on a per TID basis, mac80211 will
then sort out the AC mapping itself.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
      042ec453