- 31 8月, 2014 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 30 8月, 2014 2 次提交
-
-
The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chao Yu 提交于
Since we allocate a temporary buffer in zram_bvec_read to handle partial page operations in commit 924bd88d ("Staging: zram: allow partial page operations"), our ->failed_reads value may be incorrect as we do not increase its value when failing to allocate the temporary buffer. Let's fix this issue and correct the annotation of failed_reads. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: NJerome Marchand <jmarchan@redhat.com> Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 8月, 2014 3 次提交
-
-
由 Jiang Liu 提交于
Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins. We need to keep IRQ assignment for PCI devices during runtime power management, otherwise it may cause failure of device wakeups. Commit 3eec5952 "x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation" has fixed the issue for suspend/ hibernation, we also need the same fix for runtime device sleep too. Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271Reported-and-Tested-by: NEmanueL Czirai <amanual@openmailbox.org> Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: EmanueL Czirai <amanual@openmailbox.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Doug Anderson 提交于
If our client is requesting a clock that is above the maximum clock then the following division will result in 0: rs->max_freq / rs->speed We'll then program 0 into the SPI_BAUDR register. The Rockchip TRM says: "If the value is 0, the serial output clock (sclk_out) is disabled." It's much better to end up with the fastest possible clock rather than a clock that is off, so enforce a minimum value. Signed-off-by: NDoug Anderson <dianders@chromium.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Mikulas Patocka 提交于
The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c99 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa0 ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: NKrzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: NMilan Broz <gmazyland@gmail.com> Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
- 28 8月, 2014 14 次提交
-
-
由 Tony Lindgren 提交于
Commit 43fef47f (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) added support for configuring the PMIC to cut off resources during deeper idle states to save power. This however caused regression for n900 display power that needed the PMIC configuration to be disabled with commit d937678a (ARM: dts: Revert enabling of twl configuration for n900). Turns out the root cause of the problem is that we must use TWL4030_RESCONFIG_UNDEF instead of DEV_GRP_NULL to avoid disabling regulators that may have been enabled before the init function for twl4030-power.c runs. With TWL4030_RESCONFIG_UNDEF we let the regulator framework control the regulators like it should. Here we need to only configure the sys_clken and sys_off_mode triggers for the regulators that cannot be done by the regulator framework as it's not running at that point. This allows us to enable the PMIC configuration for n900. Fixes: 43fef47f (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) Cc: stable@vger.kernel.org # v3.16 Signed-off-by: NTony Lindgren <tony@atomide.com> Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Thierry Reding 提交于
kerneldoc doesn't know how to parse variables, so don't let it try. Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
-
由 Y.C. Chen 提交于
This avoid reading past the end of the list for certain modes Signed-off-by: NY.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: NEgbert Eich <eich@freedesktop.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 David Herrmann 提交于
Kinda unexpected, but DIV_ROUND_UP() can overflow if passed an argument bigger than UINT_MAX - DIVISOR. Fix this by testing for "!cpp" before using it in the following division. Note that DIV_ROUND_UP() is defined as: #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) ..this will obviously overflow if (n + d - 1) is bigger than UINT_MAX. Reported-by: NTommi Rantala <tt.rantala@gmail.com> Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Reviewed-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Greg Kroah-Hartman 提交于
commit bdd405d2 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Michael Welling <mwelling@emacinc.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mark Brown 提交于
Since this is a platform driver and can be probed at any time we can't annotate funtions in the probe path as __init, the code can't safely be discarded at the end of kernel init. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Mika Westerberg 提交于
This is pretty much the same as Intel Baytrail, only the CPU ID is different. Add the new ID to the supported CPU list. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Andi Kleen 提交于
On larger systems intel_pstate currently spams the boot up log with its "Intel pstate controlling ..." message for each CPU. It's the only subsystem that prints a message for each CPU. Turn the message into a pr_debug. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NDirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 03936890. Vivek writes: We not longer need this patch, since we have planned to remove the usb-phy drivers for samsung [1], we have completely deleted the support for the the same from ohci-exynos and ehci-exynos drivers too [2]. Sorry for the confusion, but this patch can be dropped and instead we can pick the patches in [2]. [1] http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35774.html [2] https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35695.html https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35696.html Cc: Sachin Kamat <sachin.kamat@samsung.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Sachin Kamat <sachin.kamat@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alex Williamson 提交于
If we assign a Radeon device to a virtual machine, we can no longer assume a fixed hardware topology, like the GPU having a parent device. This patch simply adds a few pci_is_root_bus() tests to avoid passing a NULL pointer to PCI access functions, allowing the radeon driver to work in a QEMU 440FX machine with an assigned HD8570 on the emulated PCI root bus. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hans de Goede 提交于
This is a bit bigger hammer then I would like to use for this, but for now it will have to make do. I'm working on getting my hands on one of these so that I can try to get streams to work (with a quirk flag if necessary) and then we can re-enable them. For now this at least makes uas capable disk enclosures work again by forcing fallback to the usb-storage driver. https://bugzilla.kernel.org/show_bug.cgi?id=79511 Cc: stable@vger.kernel.org # 3.15 Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make sure to verify the number of ports requested by subdriver to avoid writing beyond the end of fixed-size array in interface data. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of ports requested by a subdriver (which could have been determined from device descriptors) did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <johan@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make sure to verify the maximum number of endpoints per type to avoid writing beyond the end of a stack-allocated array. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of endpoints of a certain type reported by a device did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: NJohan Hovold <johan@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andy Shevchenko 提交于
The obvious fix after the commit d9c73bb8 "spi: dw: add support for gpio controlled chip select". This patch fixes the issue by using locally defined temporary variable. Fixes: d9c73bb8 (spi: dw: add support for gpio controlled chip select) Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org>
-
- 27 8月, 2014 10 次提交
-
-
由 Andy Shevchenko 提交于
The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Juri Lelli 提交于
Commit af040ffc ("ARM: make it easier to check the CPU part number correctly") changed ARM_CPU_PART_X masks, and the way they are returned and checked against. Usage of read_cpuid_part_number() is now deprecated, and calling places updated accordingly. This actually broke cpuidle-big_little initialization, as bl_idle_driver_init() performs a check using an hardcoded mask on cpu_id. Create an interface to perform the check (that is now even easier to read). Define also a proper mask (ARM_CPU_PART_MASK) that makes this kind of checks cleaner and helps preventing bugs in the future. Update usage accordingly. Signed-off-by: NJuri Lelli <juri.lelli@arm.com> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jiri Kosina 提交于
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Cc: stable@vger.kernel.org Reported-by: NSteven Vittitoe <scvitti@google.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Cc: stable@vger.kernel.org Reported-by: NSteven Vittitoe <scvitti@google.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Vivek Gautam 提交于
Since we want to keep support for both older usb-phys as well as the newer generic phys, lets first get the generic PHYs and fallback to older USB-PHYs only when we fail to get the former. This should fix the issue with ehci-exynos and ohci-exynos, wherein in the absence of SAMSUNG_USB2PHY config symbol, we end up getting the NOP_USB_XCEIV phy when the same is enabled. And thus the PHYs are not configured properly. Reported-by: NSachin Kamat <sachin.kamat@samsung.com> Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Jingoo Han <jg1.han@samsung.com> Tested-by: NSachin Kamat <sachin.kamat@samsung.com> Acked-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Roger Quadros 提交于
If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a "USB: set hub's default autosuspend delay as 0" Cc: [3.8+] <stable@vger.kernel.org> Signed-off-by: NRoger Quadros <rogerq@ti.com> Tested-by: NMichael Welling <mwelling@emacinc.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andreas Noever 提交于
Zero hops in tb_path_activate before writing a new path. This fixes the following scenario: - Boot with a coldplugged device - Unplug device - Plug device back in - PCI hotplug fails The hotplug operation fails because our new path matches the (now defunct) path which was setup by the firmware for the coldplugged device. By writing zeros before writing our path configuration we can force thunderbolt to retrain the path. Signed-off-by: NAndreas Noever <andreas.noever@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephen Hemminger 提交于
I have a j5 create (JUA210) USB 2 video device and adding it device id to SIS USB video gets it to work. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alex Deucher 提交于
This is a port of cedb655a to older asics. Fixes a possible divide by 0 if the harvest register is invalid. v2: drop some additional harvest munging. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
This fixes a problem with GPU resets and TLB flushes on SI/CIK. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 26 8月, 2014 10 次提交
-
-
由 Wei Yongjun 提交于
Add the missing unlock before return from function msm_fbdev_create() in the error handling case. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
This avoids a problem seen with weston (for example) where the display gets stuck in "black screen" if starting weston first thing after boot. Possibly mdp5 needs something similar. The downstream android fbdev driver always requests DMA_E (or DMA_P) when display is active, rather than only enabling it on-demand as the drm driver does, which I believe has the same end result. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
87e956e9 changed the fault handler to return -ENOSYS, which causes the iommu driver to print out a huge splat. Which wouldn't be quite so bad if nothing ever faulted. But seems like some EXA composite operations generate quite a lot of (seemingly harmless) faults. That is probably a userspace problem, but the huge increase in verbosity from iommu fault dumps makes things kind of unusable. We probably should actually log *some* message (not conditional on drm.debug). But ratelimit it. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Ian Abbott 提交于
When looking at this driver for a client, I noticed the code that configures the HSYNC pulse clobbers the display width in the same register. It only preserves the MS part of the width in bit 3 and zeros the LS part of the width in bits 9 to 4. This doesn't matter during initialization as the width is configured afterwards, but subsequent use of the FBIPUT_HSYNC ioctl would clobber the width. Preserve bits 9 to 0 of LCD_RASTER_TIMING_0_REG when configuring the horizontal sync. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Jingoo Han 提交于
Add missing dependency on RESET_CONTROLLER in order to fix the following build error. drivers/gpu/drm/sti/sti_hdmi.c: In function 'sti_hdmi_probe' drivers/gpu/drm/sti/sti_hdmi.c:780:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] Benjamin Gaignard remark: I have change "depends on" to "select" but keep the original author name. Signed-off-by: NJingoo Han <jg1.han@samsung.com>
-
由 Kiran Padwal 提交于
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: NKiran Padwal <kiran.padwal@smartplayin.com>
-
由 Wei Yongjun 提交于
In case of error, the function platform_device_register_resndata() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
-
由 Wei Yongjun 提交于
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
-
由 Wei Yongjun 提交于
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
-