Turn basically everything in vmscan.c into `unsigned long'.  This is to avoid
the possibility that some piece of code in there might decide to operate upon
more than 4G (or even 2G) of pages in one hit.

This might be silly, but we'll need it one day.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some allocations are restricted to a limited set of nodes (due to memory
policies or cpuset constraints).  If the page allocator is not able to find
enough memory then that does not mean that overall system memory is low.

In particular going postal and more or less randomly shooting at processes
is not likely going to help the situation but may just lead to suicide (the
whole system coming down).

It is better to signal to the process that no memory exists given the
constraints that the process (or the configuration of the process) has
placed on the allocation behavior.  The process may be killed but then the
sysadmin or developer can investigate the situation.  The solution is
similar to what we do when running out of hugepages.

This patch adds a check before we kill processes.  At that point
performance considerations do not matter much so we just scan the zonelist
and reconstruct a list of nodes.  If the list of nodes does not contain all
online nodes then this is a constrained allocation and we should kill the
current process.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Migrate a page with buffers without requiring writeback

This introduces a new address space operation migratepage() that may be used
by a filesystem to implement its own version of page migration.

A version is provided that migrates buffers attached to pages.  Some
filesystems (ext2, ext3, xfs) are modified to utilize this feature.

The swapper address space operation are modified so that a regular
migrate_page() will occur for anonymous pages without writeback (migrate_pages
forces every anonymous page to have a swap entry).
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add remove_from_swap

remove_from_swap() allows the restoration of the pte entries that existed
before page migration occurred for anonymous pages by walking the reverse
maps.  This reduces swap use and establishes regular pte's without the need
for page faults.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add direct migration support with fall back to swap.

Direct migration support on top of the swap based page migration facility.

This allows the direct migration of anonymous pages and the migration of file
backed pages by dropping the associated buffers (requires writeout).

Fall back to swap out if necessary.

The patch is based on lots of patches from the hotplug project but the code
was restructured, documented and simplified as much as possible.

Note that an additional patch that defines the migrate_page() method for
filesystems is necessary in order to avoid writeback for anonymous and file
backed pages.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently the zone_reclaim code has a fixed window of 30 seconds of off node
allocations should a local zone have no unused pagecache pages left.  Reclaim
will be attempted again after this timeout period to avoid repeated useless
scans for memory.  This is also useful to established sufficiently large off
node allocation chunks to relieve the local node.

It may be beneficial to adjust that time period for some special situations.
For example if memory use was exceeding node capacity one may want to give up
for longer periods of time.  If memory spikes intermittendly then one may want
to shorten the time period to reduce the number of off node allocations.

This patch allows just that....
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some bits for zone reclaim exists in 2.6.15 but they are not usable.  This
patch fixes them up, removes unused code and makes zone reclaim usable.

Zone reclaim allows the reclaiming of pages from a zone if the number of
free pages falls below the watermarks even if other zones still have enough
pages available.  Zone reclaim is of particular importance for NUMA
machines.  It can be more beneficial to reclaim a page than taking the
performance penalties that come with allocating a page on a remote zone.

Zone reclaim is enabled if the maximum distance to another node is higher
than RECLAIM_DISTANCE, which may be defined by an arch.  By default
RECLAIM_DISTANCE is 20.  20 is the distance to another node in the same
component (enclosure or motherboard) on IA64.  The meaning of the NUMA
distance information seems to vary by arch.

If zone reclaim is not successful then no further reclaim attempts will
occur for a certain time period (ZONE_RECLAIM_INTERVAL).

This patch was discussed before. See

http://marc.theaimsgroup.com/?l=linux-kernel&m=113519961504207&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113408418232531&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113389027420032&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113380938612205&w=2Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Migration code currently does not take a reference to target page
properly, so between unlocking the pte and trying to take a new
reference to the page with isolate_lru_page, anything could happen to
it.

Fix this by holding the pte lock until we get a chance to elevate the
refcount.

Other small cleanups while we're here.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some people apparently run CONFIG_NUMA without CONFIG_SWAP.  The migration
code currently depends on swap.  This patch provides a set of inline
fallback functions so that the kernel properly compiles.  However, calls to
migration functions will fail.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Extend the parameters of migrate_pages() to allow the caller control over the
fate of successfully migrated or impossible to migrate pages.

Swap migration and direct migration will have the same interface after this
patch so that patches can be independently applied to the policy layer and the
core migration code.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add gfp_mask to add_to_swap

add_to_swap does allocations with GFP_ATOMIC in order not to interfere with
swapping.  During migration we may have use add_to_swap extensively which may
lead to out of memory errors.

This patch makes add_to_swap take a parameter that specifies the gfp mask.
The page migration code can then make add_to_swap use GFP_KERNEL.
Signed-off-by: NHirokazu Takahashi <taka@valinux.co.jp>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move move_to_lru, putback_lru_pages and isolate_lru in section surrounded by
CONFIG_MIGRATION saving some codesize for single processor kernels.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Include page migration if the system is NUMA or having a memory model that
allows distinct areas of memory (SPARSEMEM, DISCONTIGMEM).

And:
- Only include lru_add_drain_per_cpu if building for an SMP system.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds the basic page migration function with a minimal implementation that
only allows the eviction of pages to swap space.

Page eviction and migration may be useful to migrate pages, to suspend
programs or for remapping single pages (useful for faulty pages or pages with
soft ECC failures)

The process is as follows:

The function wanting to migrate pages must first build a list of pages to be
migrated or evicted and take them off the lru lists via isolate_lru_page().
isolate_lru_page determines that a page is freeable based on the LRU bit set.

Then the actual migration or swapout can happen by calling migrate_pages().

migrate_pages does its best to migrate or swapout the pages and does multiple
passes over the list.  Some pages may only be swappable if they are not dirty.
 migrate_pages may start writing out dirty pages in the initial passes over
the pages.  However, migrate_pages may not be able to migrate or evict all
pages for a variety of reasons.

The remaining pages may be returned to the LRU lists using putback_lru_pages().

Changelog V4->V5:
- Use the lru caches to return pages to the LRU

Changelog V3->V4:
- Restructure code so that applying patches to support full migration does
  require minimal changes. Rename swapout_pages() to migrate_pages().

Changelog V2->V3:
- Extract common code from shrink_list() and swapout_pages()
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: "Michael Kerrisk" <mtk-manpages@gmx.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the start of the `swap migration' patch series.

Swap migration allows the moving of the physical location of pages between
nodes in a numa system while the process is running.  This means that the
virtual addresses that the process sees do not change.  However, the system
rearranges the physical location of those pages.

The main intent of page migration patches here is to reduce the latency of
memory access by moving pages near to the processor where the process
accessing that memory is running.

The patchset allows a process to manually relocate the node on which its
pages are located through the MF_MOVE and MF_MOVE_ALL options while
setting a new memory policy.

The pages of process can also be relocated from another process using the
sys_migrate_pages() function call.  Requires CAP_SYS_ADMIN.  The migrate_pages
function call takes two sets of nodes and moves pages of a process that are
located on the from nodes to the destination nodes.

Manual migration is very useful if for example the scheduler has relocated a
process to a processor on a distant node.  A batch scheduler or an
administrator can detect the situation and move the pages of the process
nearer to the new processor.

sys_migrate_pages() could be used on non-numa machines as well, to force all
of a particualr process's pages out to swap, if someone thinks that's useful.

Larger installations usually partition the system using cpusets into sections
of nodes.  Paul has equipped cpusets with the ability to move pages when a
task is moved to another cpuset.  This allows automatic control over locality
of a process.  If a task is moved to a new cpuset then also all its pages are
moved with it so that the performance of the process does not sink
dramatically (as is the case today).

Swap migration works by simply evicting the page.  The pages must be faulted
back in.  The pages are then typically reallocated by the system near the node
where the process is executing.

For swap migration the destination of the move is controlled by the allocation
policy.  Cpusets set the allocation policy before calling sys_migrate_pages()
in order to move the pages as intended.

No allocation policy changes are performed for sys_migrate_pages().  This
means that the pages may not faulted in to the specified nodes if no
allocation policy was set by other means.  The pages will just end up near the
node where the fault occurred.

There's another patch series in the pipeline which implements "direct
migration".

The direct migration patchset extends the migration functionality to avoid
going through swap.  The destination node of the relation is controllable
during the actual moving of pages.  The crutch of using the allocation policy
to relocate is not necessary and the pages are moved directly to the target.
Its also faster since swap is not used.

And sys_migrate_pages() can then move pages directly to the specified node.
Implement functions to isolate pages from the LRU and put them back later.

This patch:

An earlier implementation was provided by Hirokazu Takahashi
<taka@valinux.co.jp> and IWAMOTO Toshihiro <iwamoto@valinux.co.jp> for the
memory hotplug project.

From: Magnus

This breaks out isolate_lru_page() and putpack_lru_page().  Needed for swap
migration.
Signed-off-by: NMagnus Damm <magnus.damm@gmail.com>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds the function get_swap_page_of_type() allowing us to specify an index
in swap_info[] and select a swap_info_struct structure to be used for
allocating a swap page.

This function (or another one of similar functionality) will be necessary for
implementing the image-writing part of swsusp in the user space.   It can also
be used for simplifying the current in-kernel implementation of the
image-writing part of swsusp.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the last bits of Martin's ill-fated sys_set_zone_reclaim().

Cc: Martin Hicks <mort@wildopensource.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some users (hi Zwane) have seen a problem when running a workload that
eats nearly all of physical memory - th system does an OOM kill, even
when there is still a lot of swap free.

The problem appears to be a very big task that is holding the swap
token, and the VM has a very hard time finding any other page in the
system that is swappable.

Instead of ignoring the swap token when sc->priority reaches 0, we could
simply take the swap token away from the memory hog and make sure we
don't give it back to the memory hog for a few seconds.

This patch resolves the problem Zwane ran into.
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 - added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The idea of a swap_device_lock per device, and a swap_list_lock over them all,
is appealing; but in practice almost every holder of swap_device_lock must
already hold swap_list_lock, which defeats the purpose of the split.

The only exceptions have been swap_duplicate, valid_swaphandles and an
untrodden path in try_to_unuse (plus a few places added in this series).
valid_swaphandles doesn't show up high in profiles, but swap_duplicate does
demand attention.  However, with the hold time in get_swap_pages so much
reduced, I've not yet found a load and set of swap device priorities to show
even swap_duplicate benefitting from the split.  Certainly the split is mere
overhead in the common case of a single swap device.

So, replace swap_list_lock and swap_device_lock by spinlock_t swap_lock
(generally we seem to prefer an _ in the name, and not hide in a macro).

If someone can show a regression in swap_duplicate, then probably we should
add a hashlock for the swap_map entries alone (shorts being anatomic), so as
to help the case of the single swap device too.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

get_swap_page has often shown up on latency traces, doing lengthy scans while
holding two spinlocks.  swap_list_lock is already dropped, now scan_swap_map
drop swap_device_lock before scanning the swap_map.

While scanning for an empty cluster, don't worry that racing tasks may
allocate what was free and free what was allocated; but when allocating an
entry, check it's still free after retaking the lock.  Avoid dropping the lock
in the expected common path.  No barriers beyond the locks, just let the
cookie crumble; highest_bit limit is volatile, but benign.

Guard against swapoff: must check SWP_WRITEOK before allocating, must raise
SWP_SCANNING reference count while in scan_swap_map, swapoff wait for that to
fall - just use schedule_timeout, we don't want to burden scan_swap_map
itself, and it's very unlikely that anyone can really still be in
scan_swap_map once swapoff gets this far.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The swap header's unsigned int last_page determines the range of swap pages,
but swap_info has been using int or unsigned long in some cases: use unsigned
int throughout (except, in several places a local unsigned long is useful to
avoid overflows when adding).
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The "Adding %dk swap" message shows the number of swap extents, as a guide to
how fragmented the swapfile may be.  But a useful further guide is what total
extent they span across (sometimes scarily large).

And there's no need to keep nr_extents in swap_info: it's unused after the
initial message, so save a little space by keeping it on stack.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are several comments that swap's extent_list.prev points to the lowest
extent: that's not so, it's extent_list.next which points to it, as you'd
expect.  And a couple of loops in add_swap_extent which go all the way through
the list, when they should just add to the other end.

Fix those up, and let map_swap_page search the list forwards: profiles shows
it to be twice as quick that way - because prefetch works better on how the
structs are typically kmalloc'ed?  or because usually more is written to than
read from swap, and swap is allocated ascendingly?
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sparc can not include linux/pagemap.h because of the following circular
dependency:

asm-sparc/pgtable include linux/swap.h
linux/swap.h include now linux/pagemap.h
linux/pagemap.h include linux/mm.h
linux/mm.h include asm/pgtable.h

It needs to have the swp_entry_t type fully visible in pgtable.h,
we can't work around this using macros.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

free_pages_and_swap_cache() and free_page_and_swap_cache() use release_pages()
and page_cache_release() respectively, so make sure that we have the
declarations in scope.

Cc: Olaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Dump the current allocation order when OOM killing.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

try_to_free_pages accepts a third argument, order, but hasn't used it since
before 2.6.0.  The following patch removes the argument and updates all the
calls to try_to_free_pages.
Signed-off-by: NDarren Hart <dvhltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.cSigned-off-by: NMartin Hicks <mort@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!