All callers of async_tx_sync_epilog have called async_tx_quiesce on the
depend_tx, so async_tx_sync_epilog need only call the callback to
complete the operation.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Replace open coded "wait and acknowledge" instances with async_tx_quiesce.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The source and destination addresses are included to allow channel
selection based on address alignment.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Remove the unused ASYNC_TX_ASSUME_COHERENT flag.  Async_tx is
meant to hide the difference between asynchronous hardware and synchronous
software operations, this flag requires clients to understand cache
coherency consequences of the async path.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Andrew Morton:
	[async_memcpy] is very wrong if both ASYNC_TX_KMAP_DST and
	ASYNC_TX_KMAP_SRC can ever be set.  We'll end up using the same kmap
	slot for both src add dest and we get either corrupted data or a BUG.

Evgeniy Polyakov:
	Btw, shouldn't it always be kmap_atomic() even if flag is not set.
	That pages are usual one returned by alloc_page().

So fix the usage of kmap_atomic and kill the ASYNC_TX_KMAP_DST and
ASYNC_TX_KMAP_SRC flags.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The async_tx api provides methods for describing a chain of asynchronous
bulk memory transfers/transforms with support for inter-transactional
dependencies.  It is implemented as a dmaengine client that smooths over
the details of different hardware offload engine implementations.  Code
that is written to the api can optimize for asynchronous operation and the
api will fit the chain of operations to the available offload resources. 
 
	I imagine that any piece of ADMA hardware would register with the
	'async_*' subsystem, and a call to async_X would be routed as
	appropriate, or be run in-line. - Neil Brown

async_tx exploits the capabilities of struct dma_async_tx_descriptor to
provide an api of the following general format:

struct dma_async_tx_descriptor *
async_<operation>(..., struct dma_async_tx_descriptor *depend_tx,
			dma_async_tx_callback cb_fn, void *cb_param)
{
	struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>);
	struct dma_device *device = chan ? chan->device : NULL;
	int int_en = cb_fn ? 1 : 0;
	struct dma_async_tx_descriptor *tx = device ?
		device->device_prep_dma_<operation>(chan, len, int_en) : NULL;

	if (tx) { /* run <operation> asynchronously */
		...
		tx->tx_set_dest(addr, tx, index);
		...
		tx->tx_set_src(addr, tx, index);
		...
		async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
	} else { /* run <operation> synchronously */
		...
		<operation>
		...
		async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param);
	}

	return tx;
}

async_tx_find_channel() returns a capable channel from its pool.  The
channel pool is organized as a per-cpu array of channel pointers.  The
async_tx_rebalance() routine is tasked with managing these arrays.  In the
uniprocessor case async_tx_rebalance() tries to spread responsibility
evenly over channels of similar capabilities.  For example if there are two
copy+xor channels, one will handle copy operations and the other will
handle xor.  In the SMP case async_tx_rebalance() attempts to spread the
operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor
channel0 while cpu1 gets copy channel 1 and xor channel 1.  When a
dependency is specified async_tx_find_channel defaults to keeping the
operation on the same channel.  A xor->copy->xor chain will stay on one
channel if it supports both operation types, otherwise the transaction will
transition between a copy and a xor resource.

Currently the raid5 implementation in the MD raid456 driver has been
converted to the async_tx api.  A driver for the offload engines on the
Intel Xscale series of I/O processors, iop-adma, is provided in a later
commit.  With the iop-adma driver and async_tx, raid456 is able to offload
copy, xor, and xor-zero-sum operations to hardware engines.
 
On iop342 tiobench showed higher throughput for sequential writes (20 - 30%
improvement) and sequential reads to a degraded array (40 - 55%
improvement).  For the other cases performance was roughly equal, +/- a few
percentage points.  On a x86-smp platform the performance of the async_tx
implementation (in synchronous mode) was also +/- a few percentage points
of the original implementation.  According to 'top' on iop342 CPU
utilization drops from ~50% to ~15% during a 'resync' while the speed
according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s.
 
The tiobench command line used for testing was: tiobench --size 2048
--block 4096 --block 131072 --dir /mnt/raid --numruns 5
* iop342 had 1GB of memory available

Details:
* if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making
  async_tx_find_channel a static inline routine that always returns NULL
* when a callback is specified for a given transaction an interrupt will
  fire at operation completion time and the callback will occur in a
  tasklet.  if the the channel does not support interrupts then a live
  polling wait will be performed
* the api is written as a dmaengine client that requests all available
  channels
* In support of dependencies the api implicitly schedules channel-switch
  interrupts.  The interrupt triggers the cleanup tasklet which causes
  pending operations to be scheduled on the next channel
* Xor engines treat an xor destination address differently than a software
  xor routine.  To the software routine the destination address is an implied
  source, whereas engines treat it as a write-only destination.  This patch
  modifies the xor_blocks routine to take a an explicit destination address
  to mirror the hardware.

Changelog:
* fixed a leftover debug print
* don't allow callbacks in async_interrupt_cond
* fixed xor_block changes
* fixed usage of ASYNC_TX_XOR_DROP_DEST
* drop dma mapping methods, suggested by Chris Leech
* printk warning fixups from Andrew Morton
* don't use inline in C files, Adrian Bunk
* select the API when MD is enabled
* BUG_ON xor source counts <= 1
* implicitly handle hardware concerns like channel switching and
  interrupts, Neil Brown
* remove the per operation type list, and distribute operation capabilities
  evenly amongst the available channels
* simplify async_tx_find_channel to optimize the fast path
* introduce the channel_table_initialized flag to prevent early calls to
  the api
* reorganize the code to mimic crypto
* include mm.h as not all archs include it in dma-mapping.h
* make the Kconfig options non-user visible, Adrian Bunk
* move async_tx under crypto since it is meant as 'core' functionality, and
  the two may share algorithms in the future
* move large inline functions into c files
* checkpatch.pl fixes
* gpl v2 only correction

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-By: NNeilBrown <neilb@suse.de>