Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 18 3月, 2009 7 次提交
    • S
      x86: fix broken irq migration logic while cleaning up multiple vectors · 68a8ca59
      由 Suresh Siddha 提交于 
      Impact: fix spurious IRQs

During irq migration, we send a low priority interrupt to the previous
irq destination. This happens in non interrupt-remapping case after interrupt
starts arriving at new destination and in interrupt-remapping case after
modifying and flushing the interrupt-remapping table entry caches.

This low priority irq cleanup handler can cleanup multiple vectors, as
multiple irq's can be migrated at almost the same time. While
there will be multiple invocations of irq cleanup handler (one cleanup
IPI for each irq migration), first invocation of the cleanup handler
can potentially cleanup more than one vector (as the first invocation can
see the requests for more than vector cleanup). When we cleanup multiple
vectors during the first invocation of the smp_irq_move_cleanup_interrupt(),
other vectors that are to be cleanedup can still be pending in the local
cpu's IRR (as smp_irq_move_cleanup_interrupt() runs with interrupts disabled).

When we are ready to unhook a vector corresponding to an irq, check if that
vector is registered in the local cpu's IRR. If so skip that cleanup and
do a self IPI with the cleanup vector, so that we give a chance to
service the pending vector interrupt and then cleanup that vector
allocation once we execute the lowest priority handler.

This fixes spurious interrupts seen when migrating multiple vectors
at the same time.

[ This is apparently possible even on conventional xapic, although to
  the best of our knowledge it has never been seen.  The stable
  maintainers may wish to consider this one for -stable. ]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: stable@kernel.org
      68a8ca59
    • S
      x86, ioapic: Fix non atomic allocation with interrupts disabled · 05c3dc2c
      由 Suresh Siddha 提交于 
      Impact: fix possible race

save_mask_IO_APIC_setup() was using non atomic memory allocation while getting
called with interrupts disabled. Fix this by splitting this into two different
function. Allocation part save_IO_APIC_setup() now happens before
disabling interrupts.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      05c3dc2c
    • S
      x86, x2apic: cleanup ifdef CONFIG_INTR_REMAP in io_apic code · 29b61be6
      由 Suresh Siddha 提交于 
      Impact: cleanup

Clean up #ifdefs and replace them with helper functions.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      29b61be6
    • S
      x86, x2apic: cleanup the IO-APIC level migration with interrupt-remapping · 0280f7c4
      由 Suresh Siddha 提交于 
      Impact: simplification

In the current code, for level triggered migration, we need to modify the
io-apic RTE with the update vector information, along with modifying interrupt
remapping table entry(IRTE) with vector and destination. This is to ensure that
remote IRR bit inthe IOAPIC RTE gets cleared when the cpu does EOI.

With this patch, for level triggered, we eliminate the io-apic RTE modification
(with the updated vector information), by using a virtual vector (io-apic pin
number).  Real vector that is used for interrupting cpu will be coming from
the interrupt-remapping table entry. Trigger mode in the IRTE will always be
edge, and the actual level or edge trigger will be setup in the IO-APIC RTE.
So a level triggered interrupt will appear as an edge to the local apic
cpu but still as level to the IO-APIC.

With this change, level irq migration can be done by simply modifying
the interrupt-remapping table entry with out changing the io-apic RTE.
And as the interrupt appears as edge at the cpu, in addition to do the
local apic EOI, we need to do IO-APIC directed EOI to clear the remote
IRR bit in  the IO-APIC RTE.

This simplies the irq migration in the presence of interrupt-remapping.
Idea-by: NRajesh Sankaran <rajesh.sankaran@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      0280f7c4
    • S
      x86, x2apic: fix clear_local_APIC() in the presence of x2apic · cf6567fe
      由 Suresh Siddha 提交于 
      Impact: cleanup, paranoia

We were not clearing the local APIC in clear_local_APIC() in the
presence of x2apic. Fix it.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      cf6567fe
    • S
      x86, x2apic: use virtual wire A mode in disable_IO_APIC() with interrupt-remapping · 7c6d9f97
      由 Suresh Siddha 提交于 
      Impact: make kexec work with x2apic

disable_IO_APIC() gets called during crashdump aswell, which configures the
IO-APIC/LAPIC so that legacy interrupts can be delivered for the kexec'd kernel.

In the presence of interrupt-remapping, we need to change the
interrupt-remapping configuration aswell as modifying IO-APIC for virtual wire
B mode.

To keep things simple during the crash, use virtual wire A mode
(for which we don't need to touch io-apic and interrupt-remapping tables).
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      7c6d9f97
    • S
      x86, x2apic: enable fault handling for intr-remapping · 9d783ba0
      由 Suresh Siddha 提交于 
      Impact: interface augmentation (not yet used)

Enable fault handling flow for intr-remapping aswell. Fault handling
code now shared by both dma-remapping and intr-remapping.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      9d783ba0
  3. 14 3月, 2009 3 次提交
    • I
      x86: cpu/common.c more cleanups · 0f3fa48a
      由 Ingo Molnar 提交于 
      Complete/fix the cleanups of cpu/common.c:

 - fix ugly warning due to asm/topology.h -> linux/topology.h change
 - standardize the style across the file
 - simplify/refactor the code flow where possible

Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
LKML-Reference: <1237009789.4387.2.camel@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0f3fa48a
    • J
      x86: entry_32.S fix compile warnings - fix work mask bit width · 88200bc2
      由 Jaswinder Singh Rajput 提交于 
      Fix:

 arch/x86/kernel/entry_32.S:446: Warning: 00000000080001d1 shortened to 00000000000001d1
 arch/x86/kernel/entry_32.S:457: Warning: 000000000800feff shortened to 000000000000feff
 arch/x86/kernel/entry_32.S:527: Warning: 00000000080001d1 shortened to 00000000000001d1
 arch/x86/kernel/entry_32.S:541: Warning: 000000000800feff shortened to 000000000000feff
 arch/x86/kernel/entry_32.S:676: Warning: 0000000008000091 shortened to 0000000000000091

TIF_SYSCALL_FTRACE is 0x08000000 and until now we checked the
first 16 bits of the work mask - bit 27 falls outside of that.

Update the entry_32.S code to check the full 32-bit mask.

[ %cx => %ecx fix from Cyrill Gorcunov <gorcunov@gmail.com> ]
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "H. Peter Anvin" <hpa@kernel.org>
LKML-Reference: <1237012693.18733.3.camel@ht.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      88200bc2
    • J
      x86: cpu/common.c cleanups · 9766cdbc
      由 Jaswinder Singh Rajput 提交于 
      - fix various style problems
 - declare varibles before they get used
 - introduced clear_all_debug_regs
 - fix header files issues

LKML-Reference: <1237009789.4387.2.camel@localhost.localdomain>
Signed-off-by: NJaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9766cdbc
  5. 13 3月, 2009 16 次提交
  7. 12 3月, 2009 10 次提交
  9. 11 3月, 2009 4 次提交