- 22 3月, 2006 14 次提交
-
-
由 Rickard Osser 提交于
- Added support for AVerMedia A169 Dual Analog tuner card (dual saa7134 decoders - only 1 working right now) - Added autodetection for both parts of the card. It shows up like 2 cards, B1 and B - Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO, FIXME: B is more or less dead at this point and I suspect the FM-radio is on the B part of the board Signed-off-by: NRickard Osser <ricky@osser.se> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- added tuner_lg_taln_pal_secam_ranges - renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN - updated FlyTV mini Asus Digimatrix with new tuner Thanks-to: Rickard Osser <ricky@osser.se> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- matched indents on quotes within a printk Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- added missing "count" element in Thomson FE6600 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Used Lindent, manually changed some line breaks. Removed invalid email addresses, useless casts and useless initialization of return values. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead of int for the member 'type' of struct dmxdev_filter. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
The member dvbdev gets initialized once but is never used after that. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
The PID value is already stored in struct dmx_sct_filter_params which is a member of struct dmxdev_filter. Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marcin Rudowski 提交于
Old values generally works in A2 mono, but new ones allows: - detect and use Nicam stereo - mute in tv - use radio FM Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Also Removed whitespaces introduced by previous tena patch Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Pickworth 提交于
There is an error in the cx88 code that causes this message in the syslog when balance is changed at full volume: Mar 4 18:35:08 ian2 kernel: cx88[0]: irq pci [0x1] vid* Mar 4 18:35:39 ian2 last message repeated 348 times Mar 4 18:36:01 ian2 last message repeated 564 times ... and so on The attached patch cures this problem. Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Duncan Sands 提交于
The Coverity checker (previously Stanford checker) noticed that the value of nskips could be read even if it was never written. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Radio now works. Tuner now supports both PAL/D and STD/MN models Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 20 3月, 2006 1 次提交
-
-
由 Michael Chan 提交于
The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2006 2 次提交
-
-
由 Michael Krufky 提交于
VIDEO_CX88_ALSA should not be between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS When cx88-alsa was added to cx88/Kconfig, it was added in between VIDEO_CX88_DVB and VIDEO_CX88_DVB_ALL_FRONTENDS. This caused undesireable effects to the appearance of the menu options in menuconfig. This fix reorders cx88-alsa and cx88-dvb in Kconfig, to match saa7134, and restore the correct menuconfig appearance. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Rechberger 提交于
Fixed em28xx based system lockup, device needs to be initialized before starting the isoc transfer otherwise the system will completly lock up. Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 3月, 2006 3 次提交
-
-
由 Kevin Corry 提交于
The dm-stripe target currently does not enforce that the size of a stripe device be a multiple of the chunk-size. Under certain conditions, this can lead to I/O requests going off the end of an underlying device. This test-case shows one example. echo "0 100 linear /dev/hdb1 0" | dmsetup create linear0 echo "0 100 linear /dev/hdb1 100" | dmsetup create linear1 echo "0 200 striped 2 32 /dev/mapper/linear0 0 /dev/mapper/linear1 0" | \ dmsetup create stripe0 dd if=/dev/zero of=/dev/mapper/stripe0 bs=1k This will produce the output: dd: writing '/dev/mapper/stripe0': Input/output error 97+0 records in 96+0 records out And in the kernel log will be: attempt to access beyond end of device dm-0: rw=0, want=104, limit=100 The patch will check that the table size is a multiple of the stripe chunk-size when the table is created, which will prevent the above striped device from being created. This should not affect tools like LVM or EVMS, since in all the cases I can think of, striped devices are always created with the sizes being a multiple of the chunk-size. The size of a stripe device must be a multiple of its chunk-size. (akpm: that typecast is quite gratuitous) Signed-off-by: NKevin Corry <kevcorry@us.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Scott Bardone 提交于
Adrian Bunk wrote: > The Coverity checker spotted the following two array overflows in > drivers/net/chelsio/sge.c (in both cases, the arrays contain 3 > elements): [snip] This is a bug. The array should contain 2 elements. Here is the fix. Signed-off-by: NScott Bardone <sbardone@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 David S. Miller 提交于
return -E_NO_BIG_ENDIAN_TESTING; [E1000]: Fix 4 missed endianness conversions on RX descriptor fields. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 3月, 2006 1 次提交
-
-
由 Jesse Brandeburg 提交于
Olaf Hering reported a problem on pseries with e100 where ethtool -t would cause a bus error, and the e100 driver would stop working. Due to the new load ucode command the cb list must be allocated before calling e100_init_hw, so remove the call and just let e100_up take care of it. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
-
- 15 3月, 2006 1 次提交
-
-
由 Greg Smith 提交于
It seems this patch got dropped (it was in addition to the `s390: improve response code handling in chsc_enable_facility()' patch). Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 3月, 2006 4 次提交
-
-
由 Dave Peterson 提交于
- Disable the EDAC sysfs code. The sysfs interface that EDAC presents to user space needs more thought, and is likely to change substantially. Therefore disable it for now so users don't start depending on it in its current form. - Disable the default behavior of calling panic() when an uncorrectible error is detected (since for now, there is no sysfs interface that allows the user to configure this behavior). Signed-off-by: NDavid S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Report AC Power present in /proc/pmu/info if there is no battery. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Hunold 提交于
The behaviour of the all-in-one Video4Linux tuner driver apparently changed. It now wants to know the tv standard, otherwise it refuses to tune. Restore tuning functionality in my driver for the "Multimedia eXtension Board". The all-in-one tuner driver apparently changed its behaviour. Signed-off-by: NMichael Hunold <hunold@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Fix a bug in the block-erase optimization for Dataflash; it was using block erase even for smaller segments that need page erase. That wouldn't matter for JFFS2, which never erases less than one block (sometimes several blocks), but for other callers it might. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 3月, 2006 14 次提交
-
-
由 Adrian Bunk 提交于
The Coverity checker spotted this dead code (note that (clock_ctrl == 7) is already handled above). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
We're leaking an skb in a failure path in this function. Coverity #632 Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
Fix NULL pointer dereference detected by the Coverity checker. Kill dev -> pdev -> dev conversion while at it. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Andrew Morton 提交于
- Don't call eisa_driver_unregister() if eisa_driver_register() failed. - Properly propagate error values. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Sam Ravnborg 提交于
In latest -mm de620 gave following warning: WARNING: drivers/net/de620.o - Section mismatch: reference to \ .init.text:de620_probe from .text between 'init_module' (at offset \ 0x1682) and 'cleanup_module' init_module() call de620_probe() which is declared __init. Fix is to declare init_module() __init too. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jesper Juhl 提交于
Improve reference to PCI NE2K support in ISA NE2K documentation. Original 2.4 patch From: Ged Haywood <ged@jubileegroup.co.uk> Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jon Mason 提交于
This patch fixes an error in the dl2k driver's DMA mapping/unmapping. The adapter uses the upper 16bits of the DMA address for the buffer size. However, this is not masked off when referencing the DMA address, and can lead to errors by trying to free a DMA address out of range. Thanks, Jon Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 David S. Miller 提交于
For some reason, E1000's ->hard_start_xmit() routine returns -EFAULT instead of one of the NETDEV_TX_* error codes. In fact, it frees up the SKB before returning this. This makes the queueing layer think the packet should be requeued and subsequently we corrupt a freed object. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Antonino A. Daplas 提交于
radeonfb_parse_monitor_layout() will produce an array overrun if passed with a substring of length higher than 4 (ie, "XXXXX,YYYYYY"). Coverity Bug 494 Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Fix static array overrun Coverity Bug 556 Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The pseudo_palette has room only for 16 entries, but tdfxfb_setcolreg may attempt to write more. Coverity Bug 557 Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The pseudo_palette has room only for 16 entries, but intelfb_setcolreg will attempt to write more. Coverity Bug 558 Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
par->edid is kfree'd before using in fb_edid_to_monspecs() Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The struct info and device resource may not be released in the driver's error path. Fix. Coverity Bug 671 Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-