This reduces the number of direct users of crtc->new_config, opening up
the possibilty of removing it altogether.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And get rid of the duplicate mode structures. This patch was generated
with the following semantic patch:

@@ @@
struct intel_crtc_state {
+struct drm_crtc_state base;
+
...
-struct drm_display_mode requested_mode;
-struct drm_display_mode adjusted_mode;
...
}
@@ struct intel_crtc_state *state; @@
-state->adjusted_mode
+state->base.adjusted_mode
@@ struct intel_crtc_state *state; @@
-state->requested_mode
+state->base.mode
@@ struct intel_crtc_state state; @@
-state.adjusted_mode
+state.base.adjusted_mode
@@ struct intel_crtc_state state; @@
-state.requested_mode
+state.base.mode
@@ struct drm_crtc *crtc; @@
-to_intel_crtc(crtc)->config.adjusted_mode
+to_intel_crtc(crtc)->config.base.adjusted_mode
@@ identifier member; expression E; @@
-PIPE_CONF_CHECK_FLAGS(adjusted_mode.member, E);
+PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.member, E);
@@ identifier member; @@
-PIPE_CONF_CHECK_I(adjusted_mode.member);
+PIPE_CONF_CHECK_I(base.adjusted_mode.member);
@@ identifier member; @@
-PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.member);
+PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.member);

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The objective is to make this structure usable with the atomic helpers,
so let's start with the rename. Patch generated with coccinelle:

@@ @@
-struct intel_crtc_config {
+struct intel_crtc_state {
...
}
@@ @@
-struct intel_crtc_config
+struct intel_crtc_state

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

2 pieces of code need to read out the DDI clock: the DDI encoder and the
MST encoder .get_config() vfuncs.

Until now the SKL read out code was only in the former, so let's move
the pre and post SKL logic in intel_ddi_clock_get() and this this one
everywhere.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Hardware team updated the recommended translation values for DP/eDP 1.3.
This should help with some stability and HBR2 issues.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Satheeshakrishna M<satheeshakrishna.m@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

encoder->type can change underneath us and doesn't need to reflect
actual hw state (since we don't construct it from hw state like
e.g. encoder->crtc crtc->config).

And this can indeed happen:
1) Boot with plugged-in hdmi screen. Since we only set ->type in the
   probe functions this means we won't detect any infoframes since
   type is still unkown.
2) First probe sets type to HDMI.
3) If the first modeset now does _not_ happen on the HDMI pipe with
   infoframes encoder->get_config suddenly sees infoframes and the
   state checker gets angry.

Fix this by only relying on actual hw state when figuring out whether
the ddi port is in hdmi mode and sends infoframes.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reported-by: NPaulo Zanoni <przanoni@gmail.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just like we do in the HDMI code, set the infoframe flag if we detect
that infoframes are enabled.

v2: check for actual infoframe status as in hdmi code (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The lack of a break here wasn't for falling through to some other
important code, so made me do a double take.  Add a break just to make
things a little less confusing.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On SKL DPLL0 is used to derive CDCLK but can also be used to drive an
eDP port (as long as we don't want SSC). DPLL0 is special enough to not
be handled by the shared DPLL framework (drives CDCLK, not supposed to
enable the HDMI mode), So we need to compute the configuration
separately from the other DPLLs.

Note that we don't need to reprogram DPLL0 (which would mean bringing
down CDCLK) to support the various eDP 1.3 link rates as they all share
the same VCO (8100).
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No functional changes. Just cleaning and reorganizing it.

v2: Rebase it puting it to begin of psr rework. This helps to blame easily
at least latest changes.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_ddi.c:955:41: sparse: constant 8400000000 is so big it is long
intel_ddi.c:955:53: sparse: constant 9000000000 is so big it is long
intel_ddi.c:955:65: sparse: constant 9600000000 is so big it is long
intel_ddi.c:1028:23: sparse: constant 9600000000 is so big it is long
intel_ddi.c:1031:23: sparse: constant 9000000000 is so big it is long
intel_ddi.c:1034:23: sparse: constant 8400000000 is so big it is long
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The eDP WA to stop link train based on port type is for HSW/BDW, not
required for SKL+.
Suggested by Satheesh

v2: Simplified the check befoe stop_link_train. Suggested by Satheesh.

v3: stop_link_train need not be called from intel_enable_ddi for gen >= 9
Suggested-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Cc: Satheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch implements SKL DPLL programming that includes:
        - DPLL allocation
        - wide range PLL calculation and programming
        - DP link rate programming
        - DDI to DPLL mapping

v2: Incorporated following changes
        - Added vfunc for function required outside
        - Fixed multiple comments in WRPLL calculation

v3: - Fix the DCO computation
    - Move the initialization up to not clobber the computed values
    - Use the correct macro for DP link rate programming.
    - Use wait_for() to wait for the PLL locked bit

v4: Rebase on top of nigthly (Damien)

v5: A few code cleanups in the WRPLL computation (Damien)
    - Use uint32_t when possible
    - Use abs_diff() in the WRPLL computation
    - Make the 64bits divisions use div64_u64()
    - Fix typo in dco_central_feq_deviation (freq)
    - Replace the chain of breaks with a goto

v6: Port of the patch to work on top of the shared DPLLs (Damien)
v7: Don't try to handle eDP in ddi_pll_select() (Damien)
v8: Modified as per review comments from Paulo (Satheesh)
v9: Rebase on top of Ander's clock computation staging work for atomic (Damien)
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v3)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Skylake deprecates the usage of PORT_CLK_SEL and we are advised to use
the new DPLL_CRTL2 for the DDI->PLL mapping.

v2: Modified as per review comments
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On skylake, DPLL 1, 2 and 3 can be used for DP and HDMI. The shared dpll
framework allows us to share those DPLLs among DDIs when possible.

The most tricky part is to provide a DPLL state that can be easily
compared. DPLL_CRTL1 is shared by all the DPLLs, 6 bits each. The
per-dpll crtl1 field of the hw state is then normalized to be the same
value if 2 DPLLs do indeed have identical values for those 6 bits.

v2: Port the code to the shared DPLL infrastructure (Damien)

v3: Rebase on top of Ander's clock computation staging work for atomic (Damien)

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v2)
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Fixup compilation due to the removal of the intel_ddi_dpll_id enum.
And add a fixme about the abuse of pipe_config here.

v3: Rebase on top of the hsw_ddi_clock_get() rename (Damien)

v4: Modified as per review comments from Paulo
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Determine programmed cd clock for SKL.

v2: Fix the LCPLL1 enable warning logic

v3: Rebase over the hsw pll rework.

v4: Rebase on top of the per-platform split (Damien)

v5: Modified as per review comments from Paulo
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the infrastructure added in a previous patch to choose shared DPLLs
and calculate clocks before touching the hardware.

v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The new struct will be used in a follow up patch to allow a current and
a staged config to exist for the same shared DPLL.

v2: Rebase on by mask_to_refcount()->hweight32() change. (Damien)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This shouldn't change the behavior of those functions, since they are
called after the new_config is made effective and that points to the
current config. In a follow up patch, the mode set sequence will be
changed so this is called before disabling crtcs, and in that case
those functions should work on the staged config.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Flatten if by moving the check into the WARN.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Introduce functions to enable/disable the audio codec, incorporating the
ELD setup within enable. The disable is initially limited to HSW,
covering exactly what was done previously.

The only functional difference is that ELD valid is no longer set if
there is no connector with ELD, which should be the right thing to do
anyway. Otherwise the sequence remains the same, with warts and all, in
preparation for applying more sanity.

v2: add kernel doc.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The audio programming sequence states that the ELD must be written and
enabled after the pipe is ready. Indeed, this should clarify the
situation with

commit c7905792
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Apr 16 16:56:09 2014 +0200

    drm/i915: Remove vblank wait from haswell_write_eld

and Ville's review of it [1].

Moreover, we should not touch the relevant registers before we get the
audio power domain.

[1] http://mid.gmane.org/20140416155309.GK18465@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Everything else can be derived from that. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hsw_get_cdclk_freq() is really just HSW, so we can use IS_HSW_ULT()
instead of IS_ULT() there.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

- fini goes with init, so call it intel_power_domains_fini. While
  at it shovel some of the fini code that leaked out of it back in.

- give power_enabled functions the verb _is_ to make the meaning clearer.
  Also use a __ prefix instead of _unlocked to really discourage users.

- rename runtime_pm_init/fini to enable/disable since that's what they do.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

BDW display - DP buffer translation values changed to give better margin.

Further change to entry 6; set dword 0 bit 31=1.

Both changes were approved already but this one didn't landed BSpec yet
this is why it is in a separated patch. Making reviewer's life easier.
Also alowing separated tests and any future bisect that might be needed.

Reference: Predator r74080 / HSD 4394389

v2: Arthur noticed I was changing the wrong bit.

Cc: Arthur Runyan <arthur.j.runyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NArthur Runyan <arthur.j.runyan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reference: Predator r73977 / HSD 4394389

Cc: Arthur Runyan <arthur.j.runyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NArthur Runyan <arthur.j.runyan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A couple of things have changed compared to Broadwell:
  - Entry 9 is used for eDP
  - No more FDI

v2: Update the translation values to latest specs.
v3: Rebase on top of the BDW HDMI translation patch
v4: Remove the low voltage edp tables,
    Rebase on top of the patch not writing the HDMI entry on eDP/FDI
    DDIs (Satheesh, Paulo).
v5: Apply the / 2 fix for the number of HDMI entries (Satheesh)
v6: Rebase on top of Jani's clean up for the DDI_BUF_TRANS tables
v7: Restore the commit message that was mangled by error
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The new version of the macro does a few things better:
  - protect the arguments,
  - only evaluate the arguments once,
  - check that the arguments are of the same type,

Change LC_FREQ_2K to be a unsigned 64bit constant and removed the '()'
from the caller as a result.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Try to avoid confusion with ARRAY_SIZE()/2 and hdmi_level*2.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Resolve silent patch conflict (didn't even fail to build)
with with Sonika's preceding patch to use the
hsw_ddi_translations_fdi table to driver the fdi link training
iteration loop. Also drop the double-write loop Damien spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Renaming the HSW-specific macros for ddi buffer translation slot to denote the
slot and not the vswing/pre-emph values as they are platform-dependent.

This patch is based on top of the patch series for renaming the DP training
vswing/pre-emph defines:
http://lists.freedesktop.org/archives/intel-gfx/2014-August/050407.html

v2: Creating single macro with argument for slot number (Damien)
v3: Adding macro for num of translation entries (Damien)
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I keep telling myself that those tables aren't great because their size
is the number of dwords we need to program and not the number of entries
(number of dwords = number of entries * 2).

And... I got it wrong when I refactored the code. Fortunately, it was
only wrong when the VBT table (or the code parsing it) is itself
erroneous. Long story short, it shouldn't matter, but still, there's a
potential array overflow and random programming of the DDI translation
tables.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We used to carry a default HDMI value in entry 9, but this entry got
removed for both HSW and BDW.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We always write entries 0 to 8 from the DDI translation tables and then
entry 9 for HDMI/DVI with the help of the VBT. We then don't need the
failsafe HDMI entry in the DP/eDP/FDI tables.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Among the changes, the tables has only 10 entries instead of 12 on HSW
and the index the the 800mV/0dB entry has changed.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The knowledge about the HDMI/DVI DDI translation table was scattered
around.
  - info->hdmi_level_shift was initialized with 6, the index of the 800
    mV, 0dB translation
  - A check on the VBT value was done to ensure it wasn't overflowing
    the translation table (< 0xC)
  - The actual programming was done in intel_ddi.c

As we need to change that knowledge for Broadwell, let's gather
everything into one place.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Turns out we were again way too naive and optimistic, of course things
will change.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is only going to get worse, so split it now to avoid adding more
cases to the if/else ladder.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>