- 24 10月, 2009 3 次提交
-
-
由 Jiri Olsa 提交于
Trivial patch to fix a documentation example and to fix a comment. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.871719877@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jiri Olsa 提交于
trace_seq_printf() return value is a little ambiguous. It currently returns the length of the space available in the buffer. printf usually returns the amount written. This is not adequate here, because: trace_seq_printf(s, ""); is perfectly legal, and returning 0 would indicate that it failed. We can always see the amount written by looking at the before and after values of s->len. This is not quite the same use as printf. We only care if the string was successfully written to the buffer or not. Make trace_seq_printf() return 0 if the trace oversizes the buffer's free space, 1 otherwise. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.631787612@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jiri Olsa 提交于
Instead of directly updating filp->f_pos we should update the *ppos argument. The filp->f_pos gets updated within the file_pos_write() function called from sys_write(). Signed-off-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.399670810@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 10月, 2009 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Increase TEST_SUSPEND_SECONDS to 10 so the warning in suspend_test_finish() doesn't annoy the users of slower systems so much. Also, make the warning print the suspend-resume cycle time, so that we know why the warning actually triggered. Patch prepared during the hacking session at the Kernel Summit in Tokyo. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 10月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
It basically turns a delayed work into an immediate work, and then waits for it to finish, thus allowing you to force (and wait for) an immediate flush of a delayed work. We'll want to use this in the tty layer to clean up tty_flush_to_ldisc(). Acked-by: NOleg Nesterov <oleg@redhat.com> [ Fixed to use 'del_timer_sync()' as noted by Oleg ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
It basically turns a delayed work into an immediate work, and then waits for it to finish.
-
- 13 10月, 2009 1 次提交
-
-
由 Li Zefan 提交于
Every time we set a filter, we leak memory allocated by postfix_append_operand() and postfix_append_op(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: <stable@kernel.org> # for v2.6.31.x LKML-Reference: <4AD3D7D9.4070400@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 10月, 2009 2 次提交
-
-
由 Randy Dunlap 提交于
The following htmldocs warnings: Warning(kernel/sched.c:685): No description found for parameter 'cpu' Warning(kernel/sched.c:3676): No description found for parameter 'sd' Trigger because new parameters were added to update_rq_clock() and update_group_power() without updating the kernel-doc notation. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4AD29070.7070002@oracle.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Dobriyan 提交于
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
-
- 09 10月, 2009 4 次提交
-
-
由 Mike Galbraith 提交于
In try_to_wake_up(), we update the runqueue clock, but select_task_rq() may select a different runqueue than the one we updated, leaving the new runqueue's clock stale for a bit. This patch cures occasional huge latencies reported by latencytop when coming out of idle on a mostly idle NO_HZ box. Signed-off-by: NMike Galbraith <efault@gmx.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1255070103.7639.30.camel@marge.simson.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Some tracepoint magic (TRACE_EVENT(lock_acquired)) relies on the fact that lock hold times are positive and uses div64 on that. That triggered a build warning on MIPS, and probably causes bad output in certain circumstances as well. Make it truly positive. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1254818502.21044.112.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Wu Fengguang 提交于
It makes sense to do IOWAIT when someone is blocked due to IO throttle, as suggested by Kame and Peter. There is an old comment for not doing IOWAIT on throttle, however it has been mismatching the code for a long time. If we stop accounting IOWAIT for 2.6.32, it could be an undesirable behavior change. So restore the io_schedule. CC: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Steven Rostedt 提交于
The addition of trace_array_{v}printk used the wrong function for trace_vprintk to call. This broke trace_marker and trace_vprintk itself. Although trace_printk may not have been affected by those that end up calling trace_vbprintk. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 08 10月, 2009 6 次提交
-
-
由 Steven Rostedt 提交于
Just using the tr->buffer for the API to trace_buffer_lock_reserve is not good enough. This is because the tr->buffer may change, and we do not want to commit with a different buffer that we reserved from. This patch uses a local variable to hold the buffer that was used to reserve and commit with. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Zhenwen Xu 提交于
fix warnings that caused the API change of trace_buffer_lock_reserve() change files: kernel/trace/trace_hw_branch.c kernel/trace/trace_branch.c Signed-off-by: NZhenwen Xu <helight.xu@gmail.com> LKML-Reference: <20091008012146.GA4170@helight> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
Due to legacy code from back when the dynamic tracer used a daemon, only core kernel code was checking for failures. This is no longer the case. We must check for failures any time we perform text modifications. Cc: stable@kernel.org Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 jolsa@redhat.com 提交于
When the module is about the unload we release its call records. The ftrace_release function was given wrong values representing the module core boundaries, thus not releasing its call records. Plus making ftrace_release function module specific. Signed-off-by: NJiri Olsa <jolsa@redhat.com> LKML-Reference: <1254934835-363-3-git-send-email-jolsa@redhat.com> Cc: stable@kernel.org Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Darren Hart 提交于
If futex_wait_requeue_pi() wakes prior to requeue, we drop the reference to the source futex_key twice, once in handle_early_requeue_pi_wakeup() and once on our way out. Remove the drop from the handle_early_requeue_pi_wakeup() and keep the get/drops together in futex_wait_requeue_pi(). Reported-by: NHelge Bahmann <hcb@chaoticmind.net> Signed-off-by: NDarren Hart <dvhltc@us.ibm.com> Cc: Helge Bahmann <hcb@chaoticmind.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: stable-2.6.31 <stable@kernel.org> LKML-Reference: <4ACCE21E.5030805@us.ibm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The lock_depth and preempt_count numbers in the latency format is transposed. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 07 10月, 2009 4 次提交
-
-
由 Eero Nurkkala 提交于
Commit f2e21c96 had unfortunate side effects with cpufreq governors on some systems. If the system did not switch into NOHZ mode ts->inidle is not set when tick_nohz_stop_sched_tick() is called from the idle routine. Therefor all subsequent calls from irq_exit() to tick_nohz_stop_sched_tick() fail to call tick_nohz_start_idle(). This results in bogus idle accounting information which is passed to cpufreq governors. Set the inidle flag unconditionally of the NOHZ active state to keep the idle time accounting correct in any case. [ tglx: Added comment and tweaked the changelog ] Reported-by: NSteven Noonan <steven@uplinklabs.net> Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Rik van Riel <riel@redhat.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Greg KH <greg@kroah.com> Cc: Steven Noonan <steven@uplinklabs.net> Cc: stable@kernel.org LKML-Reference: <1254907901.30157.93.camel@eenurkka-desktop> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Paul E. McKenney 提交于
Before this patch, all of the rcu_node structures were in the same lockdep class, so that lockdep would complain when rcu_preempt_offline_tasks() acquired the root rcu_node structure's lock while holding one of the leaf rcu_nodes' locks. This patch changes rcu_init_one() to use a separate spin_lock_init() for the root rcu_node structure's lock than is used for that of all of the rest of the rcu_node structures, which puts the root rcu_node structure's lock in its own lockdep class. Suggested-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12548908983277-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
The current interaction between RCU and CPU hotplug requires that RCU block in CPU notifiers waiting for callbacks to drain. This can be greatly simplified by having each CPU relinquish its own callbacks, and for both _rcu_barrier() and CPU_DEAD notifiers to adopt all callbacks that were previously relinquished. This change also eliminates the possibility of certain types of hangs due to the previous practice of waiting for callbacks to be invoked from within CPU notifiers. If you don't every wait, you cannot hang. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1254890898456-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
Move the existing rcu_barrier() implementation to rcutree.c, consistent with the fact that the rcu_barrier() implementation is tied quite tightly to the RCU implementation. This opens the way to simplify and fix rcutree.c's rcu_barrier() implementation in a later patch. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12548908982563-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 10月, 2009 11 次提交
-
-
由 Thomas Gleixner 提交于
exit_pi_state() is called from do_exit() but not from do_execve(). Move it to release_mm() so it gets called from do_execve() as well. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Cc: stable@kernel.org Cc: Anirban Sinha <ani@anirban.org> Cc: Peter Zijlstra <peterz@infradead.org>
-
由 Peter Zijlstra 提交于
The robust list pointers of user space held futexes are kept intact over an exec() call. When the exec'ed task exits exit_robust_list() is called with the stale pointer. The risk of corruption is minimal, but still it is incorrect to keep the pointers valid. Actually glibc should uninstall the robust list before calling exec() but we have to deal with it anyway. Nullify the pointers after [compat_]exit_robust_list() has been called. Reported-by: NAnirban Sinha <ani@anirban.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Cc: stable@kernel.org
-
由 Hiroshi Shimamoto 提交于
The state char variable S should be reassigned, if S == 0. We are missing the state of the task that is going to sleep for the context switch events (in the raw mode). Fortunately the problem arises with the sched_switch/wake_up tracers, not the sched trace events. The formers are legacy now. But still, that was buggy. Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Steven Rostedt <srostedt@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4AC43118.6050409@ct.jp.nec.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Some architectures such as Sparc, ARM and MIPS (basically everything with flush_dcache_page()) need to deal with dcache aliases by carefully placing pages in both kernel and user maps. These architectures typically have to use vmalloc_user() for this. However, on other architectures, vmalloc() is not needed and has the downsides of being more restricted and slower than regular allocations. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NDavid Miller <davem@davemloft.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1254830228.21044.272.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tom Zanussi 提交于
The syscall event definitions use long for the syscall exit ret value, but unsigned long for the same thing in the format and field definitions. Change them all to long. Signed-off-by: NTom Zanussi <tzanussi@gmail.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: rostedt@goodmis.org Cc: lizf@cn.fujitsu.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1254808849-7829-4-git-send-email-tzanussi@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Rich reported a lock imbalance in the futex code: http://bugzilla.kernel.org/show_bug.cgi?id=14288 It's caused by the displacement of the retry_private label in futex_wake_op(). The code unlocks the hash bucket locks in the error handling path and retries without locking them again which makes the next unlock fail. Move retry_private so we lock the hash bucket locks when we retry. Reported-by: NRich Ercolany <rercola@acm.jhu.edu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Darren Hart <dvhltc@us.ibm.com> Cc: stable-2.6.31 <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Aaro Koskinen 提交于
Commit ffd71da4 ("panic: decrease oops_in_progress only after having done the panic") moved bust_spinlocks(0) to the end of the function, which in practice is never reached. As a result console_unblank() is not called, and on some systems the user may not see the panic message. Move it back up to before the unblanking. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1254483680-25578-1-git-send-email-aaro.koskinen@nokia.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
The rcu_barrier enum causes several problems: (1) you have to define the enum somewhere, and there is no convenient place, (2) the difference between TREE_RCU and TREE_PREEMPT_RCU causes problems when you need to map from rcu_barrier enum to struct rcu_state, (3) the switch statement are large, and (4) TINY_RCU really needs a different rcu_barrier() than do the treercu implementations. So replace it with a functionally equivalent but cleaner function pointer abstraction. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12541998232366-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
These issues identified during an old-fashioned face-to-face code review extending over many hours. This group improves an existing abstraction and introduces two new ones. It also fixes an RCU stall-warning bug found while making the other changes. o Make RCU_INIT_FLAVOR() declare its own variables, removing the need to declare them at each call site. o Create an rcu_for_each_leaf() macro that scans the leaf nodes of the rcu_node tree. o Create an rcu_for_each_node_breadth_first() macro that does a breadth-first traversal of the rcu_node tree, AKA stepping through the array in index-number order. o If all CPUs corresponding to a given leaf rcu_node structure go offline, then any tasks queued on that leaf will be moved to the root rcu_node structure. Therefore, the stall-warning code must dump out tasks queued on the root rcu_node structure as well as those queued on the leaf rcu_node structures. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12541491934126-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
Whitespace fixes, updated comments, and trivial code movement. o Fix whitespace error in RCU_HEAD_INIT() o Move "So where is rcu_write_lock()" comment so that it does not come between the rcu_read_unlock() header comment and the rcu_read_unlock() definition. o Move the module_param statements for blimit, qhimark, and qlowmark to immediately follow the corresponding definitions. o In __rcu_offline_cpu(), move the assignment to rdp_me inside the "if" statement, given that rdp_me is not used outside of that "if" statement. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12541491931164-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
Move the rcu_lock_map definition from rcutree.c to rcupdate.c so that TINY_RCU can use lockdep. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 10月, 2009 3 次提交
-
-
由 Peter Williams 提交于
normal_prio should be updated if policy changes from RT to SCHED_MORMAL or if static_prio/nice is changed. Some paths through sched_fork() ignore this requirement and may result in normal_prio having an invalid value. Fixing this issue allows the call to effective_prio() in wake_up_new_task() to be removed. Signed-off-by: NPeter Williams <pwil3058@bigpond.net.au> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <f8f46736fd4e7f090ac0.1253774830@mudlark.pw.nest> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
In the event->profile_enable() failure path, we release the per cpu buffers using kfree which is wrong because they are per cpu pointers. Although free_percpu only wraps kfree for now, that may change in the future so lets use the correct way. Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Zefan <lizf@cn.fujitsu.com>
-
由 Frederic Weisbecker 提交于
When we call the profile_enable() callback of an event, we release the shared perf event tracing buffers unconditionnaly in the failure path. This is wrong because there may be other users of these. Then check the total refcount before doing this. Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Zefan <lizf@cn.fujitsu.com>
-
- 02 10月, 2009 3 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
This patch clean up/fixes for memcg's uncharge soft limit path. Problems: Now, res_counter_charge()/uncharge() handles softlimit information at charge/uncharge and softlimit-check is done when event counter per memcg goes over limit. Now, event counter per memcg is updated only when memory usage is over soft limit. Here, considering hierarchical memcg management, ancesotors should be taken care of. Now, ancerstors(hierarchy) are handled in charge() but not in uncharge(). This is not good. Prolems: 1. memcg's event counter incremented only when softlimit hits. That's bad. It makes event counter hard to be reused for other purpose. 2. At uncharge, only the lowest level rescounter is handled. This is bug. Because ancesotor's event counter is not incremented, children should take care of them. 3. res_counter_uncharge()'s 3rd argument is NULL in most case. ops under res_counter->lock should be small. No "if" sentense is better. Fixes: * Removed soft_limit_xx poitner and checks in charge and uncharge. Do-check-only-when-necessary scheme works enough well without them. * make event-counter of memcg incremented at every charge/uncharge. (per-cpu area will be accessed soon anyway) * All ancestors are checked at soft-limit-check. This is necessary because ancesotor's event counter may never be modified. Then, they should be checked at the same time. Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
__css_put() doesn't check a bug as refcnt goes to minus. I think it should be caught. This patch adds a check for it. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
[akpm@linux-foundation.org: fix KVM] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-