Reject messages that can generate I/O while the device itself
is suspended.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Acked-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add a mutex to allow possible creators of new work to synchronize with
flushing work queues.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Acked-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Once we begin deleting a device, prevent any further messages being sent
to targets of its table (to avoid races).
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add dm_deleting_md to check whether or not a given mapped
device is currently being deleted.
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch stops the remaining dm-mpath activity during the suspend
sequence by flushing workqueues in postsuspend function.

The current dm-mpath target may not be quiet even after suspend completes
because some workqueues (e.g. device_handler's work, event handling)
are not flushed during the suspend sequence, even though suspended
devices/targets are supposed to be quiet in this state.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Rename dm_get_table to dm_get_live_table.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds barrier support for request-based dm.

CORE DESIGN

The design is basically same as bio-based dm, which emulates barrier
by mapping empty barrier bios before/after a barrier I/O.
But request-based dm has been using struct request_queue for I/O
queueing, so the block-layer's barrier mechanism can be used.

o Summary of the block-layer's behavior (which is depended by dm-core)
  Request-based dm uses QUEUE_ORDERED_DRAIN_FLUSH ordered mode for
  I/O barrier.  It means that when an I/O requiring barrier is found
  in the request_queue, the block-layer makes pre-flush request and
  post-flush request just before and just after the I/O respectively.

  After the ordered sequence starts, the block-layer waits for all
  in-flight I/Os to complete, then gives drivers the pre-flush request,
  the barrier I/O and the post-flush request one by one.
  It means that the request_queue is stopped automatically by
  the block-layer until drivers complete each sequence.

o dm-core
  For the barrier I/O, treats it as a normal I/O, so no additional
  code is needed.

  For the pre/post-flush request, flushes caches by the followings:
    1. Make the number of empty barrier requests required by target's
       num_flush_requests, and map them (dm_rq_barrier()).
    2. Waits for the mapped barriers to complete (dm_rq_barrier()).
       If error has occurred, save the error value to md->barrier_error
       (dm_end_request()).
       (*) Basically, the first reported error is taken.
           But -EOPNOTSUPP supersedes any error and DM_ENDIO_REQUEUE
           follows.
    3. Requeue the pre/post-flush request if the error value is
       DM_ENDIO_REQUEUE.  Otherwise, completes with the error value
       (dm_rq_barrier_work()).
  The pre/post-flush work above is done in the kernel thread (kdmflush)
  context, since memory allocation which might sleep is needed in
  dm_rq_barrier() but sleep is not allowed in dm_request_fn(), which is
  an irq-disabled context.
  Also, clones of the pre/post-flush request share an original, so
  such clones can't be completed using the softirq context.
  Instead, complete them in the context of underlying device drivers.
  It should be safe since there is no I/O dispatching during
  the completion of such clones.

  For suspend, the workqueue of kdmflush needs to be flushed after
  the request_queue has been stopped.  Otherwise, the next flush work
  can be kicked even after the suspend completes.

TARGET INTERFACE

No new interface is added.
Just use the existing num_flush_requests in struct target_type
as same as bio-based dm.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch moves dm_end_request() to make the next patch more readable.
No functional change.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch factors out the clone completion code, dm_done(),
from dm_softirq_done() in preparation for a subsequent patch.
No functional change.

dm_done() will be used in barrier completion, which can't use and
doesn't need softirq.  The softirq_done callback needs to get a clone
from an original request but it can't in the case of barrier, where
an original request is shared by multiple clones.  On the other hand,
the completion of barrier clones doesn't involve re-submitting requests,
which was the primary reason of the need for softirq.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch changes the counter for the number of in_flight I/Os
to md->pending from q->in_flight in preparation for a later patch.
No functional change.

Request-based dm used q->in_flight to count the number of in-flight
clones assuming the counter is always incremented for an in-flight
original request and original:clone is 1:1 relationship.
However, it this no longer true for barrier requests.
So use md->pending to count the number of in-flight clones.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The semantics of bio-based dm were changed recently in the case of
suspend with "--nolockfs" but without "--noflush".
Before 2.6.30, I/Os submitted before the suspend invocation were always
flushed.  From 2.6.30 onwards, I/Os submitted before the suspend
invocation might not be flushed.  (For details, see
http://marc.info/?t=123994433400003&r=1&w=2)

This patch brings the behaviour of request-based dm into line with
bio-based dm, simplifying the code and preparing for a subsequent patch
that will wait for all in_flight I/Os to complete without stopping
request_queue and use dm_wait_for_completion() for it.

This change in semantics simplifies the suspend code as follows:
  o Suspend is implemented as stopping request_queue
    in request-based dm, and all I/Os are queued in the request_queue
    even after suspend is invoked.
  o In the old semantics, we had to track whether I/Os were
    queued before or after the suspend invocation, so a special
    barrier-like request called 'suspend marker' was introduced.
  o With the new semantics, we don't need to flush any I/O
    so we can remove the marker and the code related to the marker
    handling and I/O flushing.

After removing this codes, the suspend sequence is now:
  1. Flush all I/Os by lock_fs() if needed.
  2. Stop dispatching any I/O by stopping the request_queue.
  3. Wait for all in-flight I/Os to be completed or requeued.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch factors out the request cloning code in dm_prep_fn()
as clone_rq().  No functional change.

This patch is a preparation for a later patch in this series which needs to
make clones from an original barrier request.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds the gfp_mask argument to alloc_rq_tio().
No functional change.

This patch is a preparation for a later patch in this series which needs to
allocate tio (for barrier I/O) with different allocation flag (GFP_NOIO) from
the one in the normal I/O code path.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch changes the argument of map_request() to clone request
from original request.  No functional change.

This patch is a preparation for PATCH 9, which needs to use
map_request() for clones sharing an original barrier request.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds md_in_flight() to get the number of in_flight I/Os.
No functional change.

This patch is a preparation for a later patch in this series, which
changes I/O counter to md->pending from q->in_flight in request-based dm.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm-kcopyd: accept zero-size jobs

This patch changes dm-kcopyd so that it accepts zero-size jobs and completes
them immediatelly via its completion thread.

It is needed for multisnapshots snapshot resizing. When we are writing to
a chunk beyond origin end, no copying is done. To simplify the code, we submit
an empty request to kcopyd and let kcopyd complete it. If we didn't submit
a request to kcopyd and called the completion routine immediatelly, it would
violate the principle that completion is called only from one thread and
it would need additional locking.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Keep track of whether or not the device is suspended within the snapshot
target module, the same as we do in dm-raid1.

We will use this later to enforce the correct sequence of ioctls to
transfer the in-core exceptions from a snapshot target instance in
one table to a replacement one capable of merging them back
into the origin.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Store the reference to the snapshot cow device in the core snapshot
code instead of each exception store.  It can be accessed through the
new function dm_snap_cow().  Exception stores should each now maintain a
reference to their parent snapshot struct.

This is cleaner and makes part of the forthcoming snapshot merge code simpler.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Reviewed-by: NJonathan Brassow <jbrassow@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>

Add number of sectors used by metadata to the end of the snapshot's status
line.

Renamed dm_exception_store_type's 'fraction_full' to 'usage'.  Renamed
arguments to be clearer about what is being returned.  Also added
'metadata_sectors'.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Rename exception functions.  Preparing to pull them out of
dm-snap.c for broader use.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Rename exception_table for broader use outside dm-snap.c
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The exception structure is not necessarily just a snapshot
element (especially after we pull it out of dm-snap.c).

Renaming appropriately.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Consolidate the insert_*exception functions.  'insert_completed_exception'
already contains all the logic to handle 'insert_exception' (via
check for a hash_shift of 0), so remove redundant function.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The origin needs to find minimum chunksize of all snapshots.  This logic is
moved to a separate function because it will be used at another place in
the snapshot merge patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Removed unnecessary 'and' masking: The right shift discards the lower
bits so there is no need to clear them.

(A later patch needs this change to support a 32-bit chunk_mask.)
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Minor code touch-up.  We don't need the 'else'.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Reviewed-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

strlcpy() will always null terminate the string.

    The code should already guarantee this as the last bytes are already
    NULs and the string lengths were restricted before being stored in
    hc.  Removing the '-1' becomes necessary so strlcpy() doesn't
    lose the last character of a maximum-length string.
	- agk
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Explicitly initialize bio lists instead of relying on kzalloc.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Hold all write bios when leg fails and errors are handled

When using a userspace daemon such as dmeventd to handle errors, we must
delay completing  bios until it has done its job.
This patch prevents the following race:
  - primary leg fails
  - write "1" fail, the write is held, secondary leg is set default
  - write "2" goes straight to the secondary leg
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Hold all write bios when errors are handled.

Previously the failures list was used only when handling errors with
a userspace daemon such as dmeventd.  Now, it is always used for all bios.
The regions where some writes failed must be marked as nosync. This can only
be done in process context (i.e. in raid1 workqueue), not in the
write_callback function.

Previously the write would succeed if writing to at least one leg
succeeded.  This is wrong because data from the failed leg may be
replicated to the correct leg.  Now, if using a userspace daemon, the
write with some failures will be held until the daemon has done its job
and reconfigured the array.  If not using a daemon, the write still
succeeds if at least one leg succeeds. This is bad, but it is consistent
with current behavior.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move bio completion out of dm_rh_mark_nosync in preparation for the
next patch.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move the logic to get a valid mirror leg into a function for re-use
in a later patch.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Use the hold framework in do_failures.

This patch doesn't change the bio processing logic, it just simplifies
failure handling and avoids periodically polling the failures list.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Add framework to delay bios until a suspend and then resubmit them with
either DM_ENDIO_REQUEUE (if the suspend was noflush) or complete them
with -EIO.  I/O barrier support will use this.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Reviewed-by: NTakahiro Yasui <tyasui@redhat.com>
Tested-by: NTakahiro Yasui <tyasui@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Report flush errors as 'F' instead of 'D' for log and mirror devices.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Implement flush callee. It uses dm_io to send zero-size barrier synchronously
and concurrently to all the mirror legs.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Call the flush callback from the log.

If flush failed, we have no alternative but to mark the whole log as dirty.
Also we set the variable flush_failed to prevent any bits ever being marked as
clean again.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce a callback pointer from the log to dm-raid1 layer.

Before some region is set as "in-sync", we need to flush hardware cache on
all the disks. But the log module doesn't have access to the mirror_set
structure. So it will use this callback.

So far the callback is unused, it will be used in further patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce "flush failed" variable.  When a flush before clearing a bit
in the log fails, we don't know anything about which which regions are
in-sync and which not.

So we need to set all regions as not-in-sync and set the variable
"flush_failed" to prevent setting the in-sync bit in the future.

A target reload is the only way to get out of this situation.

The variable will be set in following patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce flush_header and use it to flush the log device.

Note that we don't have to flush if all the regions transition
from "dirty" to "clean" state.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>