Modules: OPL3

Fix the unreleased resources in the error path of snd_opl3_create().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core

Revert the nested-device patch to keep the compatibility with the
current HAL configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Generic drivers
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Remove xxx_t typedefs from the SPARC CS4231 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also use the PnP functions to start/stop the devices during the suspend so
that drivers will not have to duplicate this code.

Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add suspend/resume callback to pnp_driver and pnp_card_driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: HDA Codec driver

Added the model entry for Shuttle ST20G5.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Clean up and optimize the codes in p16v.c

- Add proper __devinit* tags
- Reduce unnecessary functions using a closure
- Fix whitespaces
- Rename 'Unknown' to 'Side' controls
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver

Description:
This enables the 7.1 speaker output of the Audigy 2 ZS Notebook.
Further towards fixing ALSA bug#927
TODO:
SPDIF/IEC958 output. (untested, might already work)
Sound capture. (untested, might already work.)
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: EMU10K1/EMU10K2 driver

Description:
Part way to fix ALSA bug#927
Add support for the SPI interface on the CA0108 chip.
This is used to control the registers on the DAC.
Headphone output tested.
Other outputs and Capture not tested yet.
Note: The red LED does not come on, but sound is still OK.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: CA0106 driver

Fixes ALSA bug#1636
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: CA0106 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: VIA82xx driver

Add an ac97 quirk entry for Targa Traveller 811.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ES1968 driver

Fix disablement of TDMA and legacy support to prevent confliction of
resources with ISA boards.  Confirmed with Terratec DMX and CS4236.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ARM PXA2XX driver

The SDONE and CDONE interrupt on the PXA27x might become unusable in
some conditions.  Let's use an hybrid approach (interrupt with timeout)
to have the best possible behavior in all conditions.

Also let's not care about CAR_CAIP anymore.  This is useless.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA sequencer

Reduce the maximum possible number of global clients to 16 to make
more numbers available for card clients, and allow dynamically allocated
card client numbers to share the same range as application client
numbers to make sure that all 32 cards can be used at the same time.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

All users of snd_seq_create_kernel_client() have to set the client name
anyway, so we can just pass the name as parameter.  This relieves us
from having to muck around with a struct snd_seq_client_info in these
cases.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

The fields of struct snd_seq_client_callback either aren't used or are
always set to the same value, so we can get rid of it altogether.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA sequencer

None of the fields of struct snd_seq_kernel_client was actually used, so
remove them.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: YMFPCI driver

Instead of 'DS-XG', show the correct chip model (DS-1/1L/1S/1E) where possible.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: HDA Codec driver

Add the model entry (ALC880 6stack) for ASUS P5GD1-HVM.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: PCM Midlevel

Fixed wrong or supreflous snd_assert()'s.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

- Common labels for input pins
- Fix and clean up of Realtek codec parsers
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call platform_device_unregister() for all platform devices that we've
registered.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA Core

Make the control device parent of all other ALSA devices of a card.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ENS1370/1+ driver

Move the spdif and lineio parameters around so that they are compiled
even when SUPPORT_JOYSTICK isn't set.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: HDA Codec driver

- Fix Oops with auto-probing of ALC260 with digital I/O
- Fix a typo
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

- Fix ALC882 BIOS auto-probe
- Fix ALC262 basic model
- Add assert for debugging Oops
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Added the chip-detail entry for SB Live 5.1 Digital OEM [SB0220, (c) 2003].
Signed-off-by: NGergely Tamas <dice@mfa.kfki.hu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec,ATIIXP driver,Intel8x0 driver

This patch adds a new quirk for ac97 hardware that combines the existing
AC97_TUNE_MUTE_LED and AC97_TUNE_HP_ONLY quirks.  This is needed for several
current HP laptops.  Additionally, it adds the HP nx6125 to the
AC97_TUNE_MUTE_LED list.

Fixed for the latest version of ALSA by Takashi Iwai <tiwai@suse.de>.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,PCI drivers,Digigram PCXHR driver

Add Digigram PCXHR driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>