Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 21 8月, 2013 1 次提交
  3. 19 8月, 2013 1 次提交
  5. 28 6月, 2013 1 次提交
    • D
      drm: add hotspot support for cursors. · 4c813d4d
      由 Dave Airlie 提交于 
      So it looks like for virtual hw cursors on QXL we need to inform
the "hw" device what the cursor hotspot parameters are. This
makes sense if you think the host has to draw the cursor and interpret
clicks from it. However the current modesetting interface doesn't support
passing the hotspot information from userspace.

This implements a new cursor ioctl, that takes the hotspot info as well,
userspace can try calling the new interface and if it gets -ENOSYS it means
its on an older kernel and can just fallback.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      4c813d4d
  7. 25 6月, 2013 2 次提交
    • D
      drm: fix fb leak in setcrtc · 5cef29aa
      由 Daniel Vetter 提交于 
      Drivers are allowed (actually have to) disable unrelated crtcs in
their ->set_config callback (when we steal all the connectors from
that crtc). If they do that they'll clear crtc->fb to NULL.

Which results in a refcount leak, since the drm core is keeping track
of that reference.

To fix this track the old fb of all crtcs and adjust references for
all of them. Of course, since we only hold an additional reference for
the fb for the current crtc we need to increase refcounts before we
drop the old one.

This approach has the benefit that it inches us a bit closer to an
atomic modeset world, where we want to update the config of all crtcs
in one step.

This regression has been introduce in the framebuffer refcount
conversion, specifically in

commit b0d12325
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 11 01:07:12 2012 +0100

    drm: refcounting for crtc framebuffers
Reported-by: NRussell King <linux@arm.linux.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      5cef29aa
    • D
      drm: check that ->set_config properly updates the fb · cc85e121
      由 Daniel Vetter 提交于 
      Historically drm lacked fb refcounting, so the updating of crtc->fb
was done by the lower levels at a point convenient to get their own
refcounting (e.g. refcounts for the underlying gem bo, pinning
refcounts) right. With the introduction of refcounted fbs the drm core
handled the fb refcounts, but still relied on drivers to update the
crtc->fb pointer (this approach required the least invasive changes in
drivers).

Enforce this contract with a WARN_ON.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      cc85e121
  9. 17 6月, 2013 3 次提交
  11. 11 6月, 2013 4 次提交
  13. 13 5月, 2013 1 次提交
  15. 03 5月, 2013 1 次提交
  17. 30 4月, 2013 2 次提交
    • V
      drm: Kill user_modes list and the associated ioctls · c55b6b3d
      由 Ville Syrjälä 提交于 
      There is no way to use modes added to the user_modes list. We never
look at the contents of said list in the kernel, and the only operations
userspace can do are attach and detach. So the only "benefit" of this
interface is wasting kernel memory.

Fortunately it seems no real user space application ever used these
ioctls. So just kill them.

Also remove the prototypes for the non-existing drm_mode_addmode_ioctl()
and drm_mode_rmmode_ioctl() functions.

v2: Use drm_noop instead of completely removing the ioctls
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      c55b6b3d
    • V
      drm: Silence some sparse warnings · ea9cbb06
      由 Ville Syrjälä 提交于 
      drivers/gpu/drm/drm_pci.c:155:5: warning: symbol 'drm_pci_set_busid' was not declared. Should it be static?
drivers/gpu/drm/drm_pci.c:197:5: warning: symbol 'drm_pci_set_unique' was not declared. Should it be static?
drivers/gpu/drm/drm_pci.c:269:5: warning: symbol 'drm_pci_agp_init' was not declared. Should it be static?

drivers/gpu/drm/drm_crtc.c:181:1: warning: symbol 'drm_get_dirty_info_name' was not declared. Should it be static?
drivers/gpu/drm/drm_crtc.c:1123:5: warning: symbol 'drm_mode_group_init' was not declared. Should it be static?

drivers/gpu/drm/drm_modes.c:918:6: warning: symbol 'drm_mode_validate_clocks' was not declared. Should it be static?
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      ea9cbb06
  19. 22 4月, 2013 1 次提交
  21. 16 4月, 2013 1 次提交
  23. 12 4月, 2013 1 次提交
  25. 28 3月, 2013 1 次提交
  27. 28 2月, 2013 2 次提交
  29. 22 2月, 2013 1 次提交
  31. 20 2月, 2013 3 次提交
  33. 18 2月, 2013 1 次提交
  35. 14 2月, 2013 1 次提交
    • D
      drm: review locking for drm_fb_helper_restore_fbdev_mode · 6aed8ec3
      由 Daniel Vetter 提交于 
      ... it's required. Fix up exynos and the cma helper, and add a
corresponding WARN_ON to drm_fb_helper_restore_fbdev_mode.

Note that tegra calls the fbdev cma helper restore function also from
it's driver-load callback. Which is a bit against current practice,
since usually the call is only from ->lastclose, and initial setup is
done by drm_fb_helper_initial_config.

Also add the relevant drm DocBook entry.

v2: Add promised WARN to restore_fbdev_mode.
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      6aed8ec3
  37. 21 1月, 2013 12 次提交
    • D
      drm: don't hold crtc mutexes for connector ->detect callbacks · 7b24056b
      由 Daniel Vetter 提交于 
      The coup de grace of the entire journey. No more dropped frames every
10s on my testbox!

I've tried to audit all ->detect and ->get_modes callbacks, but things
became a bit fuzzy after trying to piece together the umpteenth
implemenation. Afaict most drivers just have bog-standard output
register frobbing with a notch of i2c edid reading, nothing which
could potentially race with the newly concurrent pageflip/set_cursor
code. The big exception is load-detection code which requires a
running pipe, but radeon/nouveau seem to to this without touching any
state which can be observed from page_flip (e.g. disabled crtcs
temporarily getting enabled and so a pageflip succeeding).

The only special case I could find is the i915 load detect code. That
uses the normal modeset interface to enable the load-detect crtc, and
so userspace could try to squeeze in a pageflip on the load-detect
pipe. So we need to grab the relevant crtc mutex in there, to avoid
the temporary crtc enabling to sneak out and be visible to userspace.

Note that the sysfs files already stopped grabbing the per-crtc locks,
since I didn't want to bother with doing a interruptible
modeset_lock_all. But since there's very little in-between breakage
(essentially just the ability for userspace to pageflip on load-detect
crtcs when it shouldn't on the i915 driver) I figured I don't need to
bother.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      7b24056b
    • D
      drm: only grab the crtc lock for pageflips · b4d5e7d1
      由 Daniel Vetter 提交于 
      The pagelip ioctl itself is rather simply, so the hard work for this
patch is auditing all the drivers:

- exynos: Pageflip is protect with dev->struct_mutex and ...
  synchronous. But nothing fancy going on, besides a check whether the
  crtc is enabled, which should probably be somewhere in the drm core
  so that we have unified behaviour across all drivers.

- i915: hw-state is protected with dev->struct_mutex, the delayed
  unpin work together with the other stuff the pageflip complete irq
  handler needs is protected by the event_lock spinlock.

- nouveau: With the pin/unpin functions fixed, everything looks safe:
  A bit of ttm wrestling and refcounting, and a few channel accesses.
  The later are either already proteced sufficiently, or are now safe
  with the channel locking introduced to make cursor updates safe.

- radeon: The irq_get/put functions look a bit race, since the
  atomic_inc/dec isn't protect with locks. Otoh they're all per-crtc,
  so we should be safe with per-crtc locking from the drm core. Then
  there's tons of per-crtc register access, which could potentially go
  through the indirect reg acces. But that's fixed to make cursor
  updates concurrent. Bookeeping for the drm even is also protected
  with the even_lock, which also protects against the pageflip irq
  handler since radeon hw seems to have no way to queue these up
  asynchronously. Otherwise just a bit of ttm-based buffer handling
  and fencing, which is now safe with the previous patch to hold
  bdev->fence_lock while grabbing the ttm fence.

- shmob: Only one crtc. That's an easy one ...

- vmwgfx: As usual a bit special with tons different things:
  - Flippable check using is_implicit and num_implicit. Changes to
    those seem to be nicely covered with the global modeset lock, so
    we should be fine.
  - Some dirty cliprect handling stuff, or at least that is my guess.
    Looks like it's fine since either it's per-crtc, invariant or
    (like the execbuf stuff launched) protected otherwise.
  - Adding the actual flip to the fence_event list. On a quick look
    this seems to have solid locking in place, too.
  ... but generally this is all way over my head.

- imx: Impressive display of races between the page_flip
  implementation and the irq handler. Also, ipu_drm_set_base which
  gets eventually called from the irq handler to update the display
  base isn't really protected against concurrent set_config calls from
  process context.  In any case, going for per-crtc locking won't make
  this worse, so nothing to do.

- omap: The new async callback code merged into 3.8 seems to have
  solid locking in place, and there doesn't seem to be any shared
  state at risk. Especially since the callbacks still use
  modeset_lock_all and are so not converted.

v2: Update omapdrm analysis to 3.8 code per the discussion with Rob
Clark.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      b4d5e7d1
    • D
      drm: optimize drm_framebuffer_remove · b62584e3
      由 Daniel Vetter 提交于 
      Now that all framebuffer usage is properly refcounted, we are no
longer required to hold the modeset locks while dropping the last
reference. Hence implemented a fastpath which avoids the potential
stalls associated with grabbing mode_config.lock for the case where
there's no other reference around.

Explain in a big comment why it is safe. Also update kerneldocs with
the new locking rules around drm_framebuffer_remove.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      b62584e3
    • D
      drm: refcounting for crtc framebuffers · b0d12325
      由 Daniel Vetter 提交于 
      With the prep patch to encapsulate ->set_crtc calls, this is now
rather easy. Hooray for inconsistent semantics between ->set_crtc and
->page_flip, where the driver callback is supposed to update the fb
pointer, and ->update_plane, where the drm core does the same.

Also, since the drm core functions check crtc->fb before calling into
driver callbacks, we can't really reduce the critical sections
protected by the mode_config locks.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      b0d12325
    • D
      drm: refcounting for sprite framebuffers · 6c2a7532
      由 Daniel Vetter 提交于 
      Now plane->fb holds a reference onto it's framebuffer. Nothing too
fancy going on here:
- Extract __drm_framebuffer_unreference to be called when we know
  we're not dropping the last reference, e.g. useful in the fb cleanup
  code.
- Reduce the locked sections in the set_plane ioctl to only protect
  plane->fb/plane->crtc and the driver callback (i.e. hw state).
  Everything either doesn't disappear (crtc, plane) or is refcounted
  (fb), and all the data we check is invariant over the respective
  object's lifetimes.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      6c2a7532
    • D
      drm: fb refcounting for dirtyfb_ioctl · 4ccf097f
      由 Daniel Vetter 提交于 
      We only need to ensure that the fb stays around for long enough. While
at it, only grab the modeset locks when we need them (since most
drivers don't implement the dirty callback, this should help jitter
and stalls when using the generic modeset driver).
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      4ccf097f
    • D
      drm: don't take modeset locks in getfb ioctl · 58c0dca1
      由 Daniel Vetter 提交于 
      We only need to push the fb unreference a bit down. While at it,
properly pass the return value from ->create_handle back to userspace.

Most drivers either return -ENODEV if they don't have a concept of
buffer objects (ast, cirrus, ...) or just install a handle for the
underlying gem object (which is ok since we hold a reference on that
through the framebuffer).

v2: Split out the ->create_handle rework in the individual drivers.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      58c0dca1
    • D
      drm: push modeset_lock_all into ->fb_create driver callbacks · 468174f7
      由 Daniel Vetter 提交于 
      And drop it where it's not needed. Most driver just lookup the gem
object, allocate an fb struct, fill in all the useful fields and then
register it with drm_framebuffer_init.

All of these operations are already separately locked, and since we
only put the fb into the fpriv->fbs list _after_ having called
->fb_create, we can't also race with rmfb. We can otoh race with other
ioctls that put the framebuffer to use, but all drivers have been
reorganized already to call drm_framebuffer_init last in the fb
creation sequence.

So essentially, we can completely remove any modeset locks from the
addfb ioctl paths. Yeah!

Also, reference-counting is solid - we get a reference from fb_create
which we transfer to the fpriv->fbs list. And after unlocking the
fpriv->fbs_lock we don't touch the framebuffer any longer. Furthermore
drm_framebuffer_init has added a 2nd reference for the idr lookup, and
any access through that table will do it's own refcounting.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      468174f7
    • D
      drm: nest modeset locks within fpriv->fbs_lock · 7d331595
      由 Daniel Vetter 提交于 
      Atm we still need to unconditionally take the modeset locks in the
rmfb paths. But eventually we only want to take them if there are
other users around as a slow-path. This way sane userspace avoids
blocking on edid reads and other stuff in rmfb if it ensures that the
fb isn't used anywhere by a crtc/plane.

We can do a quick check for such other users once framebuffers are
properly refcounting by locking at the refcount - if it's more than 1,
there are other users left. Again, rmfb racing against other ioctls
isn't a real problem, userspace is allowed to shoot its foot.

This patch just prepares this by moving the modeset locks to nest
within fpriv->fbs_lock. Now the distinction between the fbs_lock and
the device-global fb_lock is clear, since we need to hold the fbs_lock
outside of any modeset_locks in fb_release.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      7d331595
    • D
      drm: reference framebuffers which are on the idr · 2b677e8c
      由 Daniel Vetter 提交于 
      Since otherwise looking and reference-counting around
drm_framebuffer_lookup will be an unmanageable mess. With this change,
an object can either be found in the idr and will stay around once we
incremented the reference counter. Or it will be gone for good and
can't be looked up using its id any more.

Atomicity is guaranteed by the dev->mode_config.fb_lock. The
newly-introduce fpriv->fbs_lock looks a bit redundant, but the next
patch will shuffle the locking order between these two locks and all
the modeset locks taken in modeset_lock_all, so we'll need it.

Also, since userspace could do really funky stuff and race e.g. a
getresources with an rmfb, we need to make sure that the kernel
doesn't fall over trying to look-up an inexistent fb, or causing
confusion by having two fbs around with the same id. Simply reset the
framebuffer id to 0, which marks it as reaped. Any lookups of that id
will fail, so the object is really gone for good from userspace's pov.

Note that we still need to protect the "remove framebuffer from all
use-cases" and the final unreference with the modeset-lock, since most
framebuffer use-sites don't implement proper reference counting yet.
We can only lift this once _all_ users are converted.

With this change, two references are held on alife, but unused
framebuffers:
- The reference for the idr lookup, created in this patch.
- For user-created framebuffers the fpriv->fbs reference, for
  driver-private fbs the driver is supposed to hold it's own last
  reference.

Note that the dev->mode_config.fb_list itself does _not_ hold a
reference onto the framebuffers (this list is essentially only used
for debugfs files). Hence if there's anything left there when the
driver has cleaned up all it's modeset resources, this is a ref-leak.
WARN about it.

Now we only need to fix up all other places to properly reference
count framebuffers.

v2: Fix spelling fail in a comment spotted by Rob Clark.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      2b677e8c
    • D
      drm: revamp framebuffer cleanup interfaces · 36206361
      由 Daniel Vetter 提交于 
      We have two classes of framebuffer
- Created by the driver (atm only for fbdev), and the driver holds
  onto the last reference count until destruction.
- Created by userspace and associated with a given fd. These
  framebuffers will be reaped when their assoiciated fb is closed.

Now these two cases are set up differently, the framebuffers are on
different lists and hence destruction needs to clean up different
things. Also, for userspace framebuffers we remove them from any
current usage, whereas for internal framebuffers it is assumed that
the driver has done this already.

Long story short, we need two different ways to cleanup such drivers.
Three functions are involved in total:
- drm_framebuffer_remove: Convenience function which removes the fb
  from all active usage and then drops the passed-in reference.
- drm_framebuffer_unregister_private: Will remove driver-private
  framebuffers from relevant lists and drop the corresponding
  references. Should be called for driver-private framebuffers before
  dropping the last reference (or like for a lot of the drivers where
  the fbdev is embedded someplace else, before doing the cleanup
  manually).
- drm_framebuffer_cleanup: Final cleanup for both classes of fbs,
  should be called by the driver's ->destroy callback once the last
  reference is gone.

This patch just rolls out the new interfaces and updates all drivers
(by adding calls to drm_framebuffer_unregister_private at all the
right places)- no functional changes yet. Follow-on patches will move
drm core code around and update the lifetime management for
framebuffers, so that we are no longer required to keep framebuffers
alive by locking mode_config.mutex.

I've also updated the kerneldoc already.

vmwgfx seems to again be a bit special, at least I haven't figured out
how the fbdev support in that driver works. It smells like it's
external though.

v2: The i915 driver creates another private framebuffer in the
load-detect code. Adjust its cleanup code, too.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      36206361
    • D
      drm: create drm_framebuffer_lookup · 786b99ed
      由 Daniel Vetter 提交于 
      And replace all fb lookups with it. Also add a WARN to
drm_mode_object_find since that is now no longer the blessed interface
to look up an fb. And add kerneldoc to both functions.

This only updates all callsites, but immediately drops the acquired
refence again. Hence all callers still rely on the fact that a mode fb
can't disappear while they're holding the struct mutex. Subsequent
patches will instate proper use of refcounts, and then rework the rmfb
and unref code to no longer serialize fb destruction with the
mode_config lock. We don't want that since otherwise a compositor
might end up stalling for a few frames in rmfb.

v2: Don't use kref_get_unless_zero - Greg KH doesn't like that kind of
interface.
Reviewed-by: NRob Clark <rob@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      786b99ed