- 09 11月, 2010 26 次提交
-
-
由 Eric Dumazet 提交于
Instead of wakeup all sleepers, use wake_up_interruptible_sync_poll() to wakeup only ones interested into writing the socket. This patch is a specialization of commit 37e5540b (epoll keyed wakeups: make sockets use keyed wakeups). On a test program provided by Alan Crequy : Before: real 0m3.101s user 0m0.000s sys 0m6.104s After: real 0m0.211s user 0m0.000s sys 0m0.208s Reported-by: NAlban Crequy <alban.crequy@collabora.co.uk> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While tracking dev_base_lock users, I found decnet used it in dnet_select_source(), but for a wrong purpose: Writers only hold RTNL, not dev_base_lock, so readers must use RCU if they cannot use RTNL. Adds an rcu_head in struct dn_ifaddr and handle proper RCU management. Adds __rcu annotation in dn_route as well. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
bond_info_seq_start() uses a read_lock(&dev_base_lock) to make sure device doesn’t disappear. Same goal can be achieved using RCU. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
dev_base_lock is the legacy way to lock the device list, and is planned to disappear. (writers hold RTNL, readers hold RCU lock) Convert aoecmd_cfg_pkts() to RCU locking. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arce, Abraham 提交于
Add suspend/resume support using default open/stop interface methods to do hardware dependant operations. On suspend, same low power state (soft power mode) will be kept, the following blocks will be disabled: - Internal PLL Clock - Tx/Rx PHY - MAC - SPI Interface Signed-off-by: NAbraham Arce <x0066660@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Pavel Emelyanov 提交于
The sgs allocation error path leaks the allocated message. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NAndy Grover <andy.grover@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Blaschka 提交于
QDIO is running independent from netdevice state. We are not allowed to schedule NAPI in case the netdevice is not open. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
For a certain Hipersockets specific error code in the xmit path, the qeth driver tries to invoke dev_queue_xmit again. Commit 79640a4c introduces a busylock causing locking problems in case of re-invoked dev_queue_xmit by qeth. This patch removes the attempts to retry packet sending with dev_queue_xmit from the qeth driver. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Junchang Wang 提交于
This fix a bug reported by backyes. Right the first time pktgen's using queue_map that's not been initialized by set_cur_queue_map(pkt_dev); Signed-off-by: NJunchang Wang <junchangwang@gmail.com> Signed-off-by: NBackyes <backyes@mail.ustc.edu.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Chazarain 提交于
After e6484930: net: allocate tx queues in register_netdevice These calls make net drivers oops at load time, so let's avoid people git-bisect'ing known problems. Signed-off-by: NGuillaume Chazarain <guichaz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Chazarain 提交于
After e6484930: net: allocate tx queues in register_netdevice It causes an Oops at skge_probe() time. Signed-off-by: NGuillaume Chazarain <guichaz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
The type of FRAG6_CB(prev)->offset is int, skb->len is *unsigned* int, and offset is int. Without this patch, type conversion occurred to this expression, when (FRAG6_CB(prev)->offset + prev->len) is less than offset. Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The basic classifier keeps statistics but does not report it to user space. This showed up when using basic classifier (with police) as a default catch all on ingress; no statistics were reported. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Woodhouse 提交于
The existing 'FirmwareVersion' attribute only covers the DSP firmware as provided by Conexant; not the overall version of the device firmware. We do want to be able to see the full version number too. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add new ext4 inode tracepoints ext4: Don't call sb_issue_discard() in ext4_free_blocks() ext4: do not try to grab the s_umount semaphore in ext4_quota_off ext4: fix potential race when freeing ext4_io_page structures ext4: handle writeback of inodes which are being freed ext4: initialize the percpu counters before replaying the journal ext4: "ret" may be used uninitialized in ext4_lazyinit_thread() ext4: fix lazyinit hang after removing request
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: TTY: move .gitignore from drivers/char/ to drivers/tty/vt/ TTY: create drivers/tty/vt and move the vt code there TTY: create drivers/tty and move the tty core files there
-
由 Linus Torvalds 提交于
Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6: Staging: ath6kl: remove empty files that mess with 'distclean' staging: ath6kl: Fixing the driver to use modified mmc_host structure Staging: solo6x10: fix build problem
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: mmc: sh_mmcif: Convert extern inline to static inline. ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings. ARM: mach-shmobile: fix sh7372 after a recent clock framework rework ARM: mach-shmobile: include drivers/sh/Kconfig ARM: mach-shmobile: ap4evb: Add HDMI sound support ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support ARM: shmobile: remove sh_timer_config clk member
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: clkfwk: Fix up checkpatch warnings. sh: make some needlessly global sh7724 clocks static sh: add clk_round_parent() to optimize parent clock rate sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit. sh: nommu: Support building without an uncached mapping. sh: nommu: use 32-bit phys mode. sh: mach-se: Fix up SE7206 no ioport build. sh: intc: Update for single IRQ reservation helper. sh: clkfwk: Fix up rate rounding error handling. sh: mach-se: Rip out superfluous 7751 PIO routines. sh: mach-se: Rip out superfluous 770x PIO routines. sh: mach-edosk7705: Kill off machtype, consolidate board def. sh: mach-edosk7705: update for this century, kill off PIO trapping. sh: mach-se: Rip out superfluous 7206 PIO routines. sh: mach-systemh: Kill off dead board. sh: mach-snapgear: Kill off machtype, consolidate board def. sh: mach-snapgear: Rip out superfluous PIO routines. sh: mach-microdev: SuperIO-relative ioport mapping.
-
由 Theodore Ts'o 提交于
Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and ext4_begin_ordered_truncate() Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Commit 5c521830 (ext4: Support discard requests when running in no-journal mode) attempts to add sb_issue_discard() for data blocks (in data=writeback mode) and in no-journal mode. Unfortunately, this no longer works, because in commit dd3932ed (block: remove BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous interface, and there are times when we call ext4_free_blocks() when we are are holding a spinlock, or are otherwise in an atomic context. For now, I've removed the call to sb_issue_discard() to prevent a deadlock or (if spinlock debugging is enabled) failures like this: BUG: scheduling while atomic: rc.sysinit/1376/0x00000002 Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1 Call Trace: [<ffffffff810397ce>] __schedule_bug+0x5e/0x70 [<ffffffff81403110>] schedule+0x950/0xa70 [<ffffffff81060bad>] ? insert_work+0x7d/0x90 [<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30 [<ffffffff81061127>] ? queue_work+0x37/0x60 [<ffffffff8140377d>] schedule_timeout+0x21d/0x360 [<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540 [<ffffffff81402680>] wait_for_common+0xc0/0x150 [<ffffffff81041490>] ? default_wake_function+0x0/0x10 [<ffffffff812034bc>] ? submit_bio+0x7c/0x100 [<ffffffff810680a0>] ? wake_bit_function+0x0/0x40 [<ffffffff814027b8>] wait_for_completion+0x18/0x20 [<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210 [<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60 [<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120 [<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70 [<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30 [<ffffffff81191618>] ext4_truncate+0x178/0x5d0 [<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280 [<ffffffff810d8976>] vmtruncate+0x56/0x70 [<ffffffff811925cb>] ext4_setattr+0x14b/0x460 [<ffffffff811319e4>] notify_change+0x194/0x380 [<ffffffff81117f80>] do_truncate+0x60/0x90 [<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20 [<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20 [<ffffffff81127539>] do_last+0x5d9/0x770 [<ffffffff811278bd>] do_filp_open+0x1ed/0x680 [<ffffffff8140644f>] ? page_fault+0x1f/0x30 [<ffffffff81132bfc>] ? alloc_fd+0xec/0x140 [<ffffffff81118db1>] do_sys_open+0x61/0x120 [<ffffffff81118e8b>] sys_open+0x1b/0x20 [<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b https://bugzilla.kernel.org/show_bug.cgi?id=22302Reported-by: NMathias Burén <mathias.buren@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: jiayingz@google.com
-
由 Dmitry Monakhov 提交于
It's not needed to sync the filesystem, and it fixes a lock_dep complaint. Signed-off-by: NDmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz>
-
由 Theodore Ts'o 提交于
Use an atomic_t and make sure we don't free the structure while we might still be submitting I/O for that page. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
The following BUG can occur when an inode which is getting freed when it still has dirty pages outstanding, and it gets deleted (in this because it was the target of a rename). In ordered mode, we need to make sure the data pages are written just in case we crash before the rename (or unlink) is committed. If the inode is being freed then when we try to igrab the inode, we end up tripping the BUG_ON at fs/ext4/page-io.c:146. To solve this problem, we need to keep track of the number of io callbacks which are pending, and avoid destroying the inode until they have all been completed. That way we don't have to bump the inode count to keep the inode from being destroyed; an approach which doesn't work because the count could have already been dropped down to zero before the inode writeback has started (at which point we're not allowed to bump the count back up to 1, since it's already started getting freed). Thanks to Dave Chinner for suggesting this approach, which is also used by XFS. kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146! Call Trace: [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307 [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2 [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5 [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d [<ffffffff81087910>] do_writepages+0x1c/0x25 [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10 [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2 [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c [<ffffffff810c14a3>] evict+0x22/0x92 [<ffffffff810c1a3d>] iput+0x212/0x249 [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9 [<ffffffff810bdf6b>] d_kill+0x3d/0x5d [<ffffffff810be613>] dput+0x13a/0x147 [<ffffffff810b990d>] sys_renameat+0x1b5/0x258 [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38 [<ffffffff810b99c6>] sys_rename+0x16/0x18 [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Reported-by: NNick Bowler <nbowler@elliptictech.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Tested-by: NNick Bowler <nbowler@elliptictech.com>
-
- 08 11月, 2010 6 次提交
-
-
由 Paul Mundt 提交于
Presently the b43legacy build fails on an sh randconfig: In file included from include/net/dst.h:12, from drivers/net/wireless/b43legacy/xmit.c:32: include/net/dst_ops.h:28: error: expected ':', ',', ';', '}' or '__attribute__' before '____cacheline_aligned_in_smp' include/net/dst_ops.h: In function 'dst_entries_get_fast': include/net/dst_ops.h:33: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_get_slow': include/net/dst_ops.h:41: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_add': include/net/dst_ops.h:49: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_init': include/net/dst_ops.h:55: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_destroy': include/net/dst_ops.h:60: error: 'struct dst_ops' has no member named 'pcpuc_entries' make[5]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1 make[5]: *** Waiting for unfinished jobs.... Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Mundt 提交于
-
由 Paul Mundt 提交于
Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linus
-
由 Paul Mundt 提交于
The clk_round_parent() change introduced various checkpatch warnings, tidy them up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
These clocks are currently only used inside one .c file and are not declared in any headers, therefore having them global is useless. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Sometimes it is possible and reasonable to adjust the parent clock rate to improve precision of the child clock, e.g., if the child clock has no siblings. clk_round_parent() is a new addition to the SH clock-framework API, that implements such an optimization for child clocks with divisors, taking all integer values in a range. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 07 11月, 2010 2 次提交
-
-
由 Dmitry Torokhov 提交于
This should fix the following warning: net/core/pktgen.c: In function ‘pktgen_if_write’: net/core/pktgen.c:890: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Reviewed-by: NNelson Elhage <nelhage@ksplice.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Kroah-Hartman 提交于
These two .h files would get removed from the tree when doing make distclean It turns out they are not needed at all, so just delete them which fixes people's git trees when doing development. Reported-by: NAndi Kleen <andi@firstfloor.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 11月, 2010 6 次提交
-
-
由 Vivek Goyal 提交于
While scanning the floopy code due to c093ee4f ("floppy: fix use-after-free in module load failure path"), I found one more instance of trying to access disk->queue pointer after doing put_disk() on gendisk. For some reason , floppy moule still loads/unloads fine. The object is probably still around with right pointer values. o There seems to be one more instance of trying to cleanup the request queue after we have called put_disk() on associated gendisk. o This fix is more out of code inspection. Even without this fix for some reason I am able to load/unload floppy module without any issues. o Floppy module loads/unloads fine after the fix. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Kroah-Hartman 提交于
The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to be ignored by git, so move the .gitignore file that was doing it to the properly location now that the files have moved as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linus Torvalds 提交于
Commit 27ae60f8 ("ipw2x00: replace "ieee80211" with "libipw" where appropriate") changed DRV_NAME to be "libipw", but didn't properly fix up the places where it was used to specify the name for the /proc/net/ directory. For backwards compatibility reasons, that directory name remained "ieee80211", but due to the DRV_NAME change, the error case printouts and the cleanup functions now used "libipw" instead. Which made it all fail badly. For example, on module unload as reported by Randy: WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e() name 'libipw' because it's trying to unregister a /proc directory that obviously doesn't even exist. Clean it all up to use DRV_PROCNAME for the actual /proc directory name. Reported-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Pavel Roskin <proski@gnu.org> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: BookE: Load the lower half of MSR KVM: PPC: BookE: fix sleep with interrupts disabled KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit(). PPC: KVM: Book E doesn't have __end_interrupts. KVM: x86: Issue smp_call_function_many with preemption disabled KVM: x86: fix information leak to userland KVM: PPC: fix information leak to userland KVM: MMU: fix rmap_remove on non present sptes KVM: Write protect memory after slot swap
-
由 Linus Torvalds 提交于
Commit 48821184 ("floppy: switch to one queue per drive instead of sharing a queue") introduced a use-after-free. We do "put_disk()" on the disk device _before_ we then clean up the queue associated with that disk. Move the put_disk() down to avoid dereferencing a free'd data structure. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Vivek Goyal <vgoyal@redhat.com> Reported-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Commit d9ca07a0 ("watchdog: Avoid kernel crash when disabling watchdog") introduces a section mismatch. Now that we reference no_watchdog from non-__init code it can no longer be __initdata. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-