- 26 11月, 2008 2 次提交
-
-
由 Alexey Dobriyan 提交于
To avoid unnecessary complications with passing netns around. * set once, very early after allocating * once set, never changes For a while create every xfrm_state in init_net. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 10月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
ifdef out * struct sk_buff::sp (pointer) * struct dst_entry::xfrm (pointer) * struct sock::sk_policy (2 pointers) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2008 1 次提交
-
-
由 Arnaud Ebalard 提交于
Provides implementation of the enhancements of XFRM/PF_KEY MIGRATE mechanism specified in draft-ebalard-mext-pfkey-enhanced-migrate-00. Defines associated PF_KEY SADB_X_EXT_KMADDRESS extension and XFRM/netlink XFRMA_KMADDRESS attribute. Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
Herbert Xu came up with the idea and the original patch to make xfrm_state dump list contain also dumpers: As it is we go to extraordinary lengths to ensure that states don't go away while dumpers go to sleep. It's much easier if we just put the dumpers themselves on the list since they can't go away while they're going. I've also changed the order of addition on new states to prevent a never-ending dump. Timo Teräs improved the patch to apply cleanly to latest tree, modified iteration code to be more readable by using a common struct for entries in the list, implemented the same idea for xfrm_policy dumping and moved the af_key specific "last" entry caching to af_key. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NTimo Teras <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
As discovered by Timo Teräs, the currently xfrm_state_walk scheme is racy because if a second dump finishes before the first, we may free xfrm states that the first dump would walk over later. This patch fixes this by storing the dumps in a list in order to calculate the correct completion counter which cures this problem. I've expanded netlink_cb in order to accomodate the extra state related to this. It shouldn't be a big deal since netlink_cb is kmalloced for each dump and we're just increasing it by 4 or 8 bytes. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 9月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
Now that we save states within a walk we need synchronisation so that the list the saved state is on doesn't disappear from under us. As it stands this is done by keeping the state on the list which is bad because it gets in the way of the management of the state life-cycle. An alternative is to make our own pseudo-RCU system where we use counters to indicate which state can't be freed immediately as it may be referenced by an ongoing walk when that resumes. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2008 1 次提交
-
-
由 Marcin Slusarz 提交于
it removes these warnings when CONFIG_AUDITSYSCALL is unset: net/xfrm/xfrm_user.c: In function 'xfrm_add_sa': net/xfrm/xfrm_user.c:412: warning: unused variable 'sid' net/xfrm/xfrm_user.c:411: warning: unused variable 'sessionid' net/xfrm/xfrm_user.c:410: warning: unused variable 'loginuid' net/xfrm/xfrm_user.c: In function 'xfrm_del_sa': net/xfrm/xfrm_user.c:485: warning: unused variable 'sid' net/xfrm/xfrm_user.c:484: warning: unused variable 'sessionid' net/xfrm/xfrm_user.c:483: warning: unused variable 'loginuid' net/xfrm/xfrm_user.c: In function 'xfrm_add_policy': net/xfrm/xfrm_user.c:1132: warning: unused variable 'sid' net/xfrm/xfrm_user.c:1131: warning: unused variable 'sessionid' net/xfrm/xfrm_user.c:1130: warning: unused variable 'loginuid' net/xfrm/xfrm_user.c: In function 'xfrm_get_policy': net/xfrm/xfrm_user.c:1382: warning: unused variable 'sid' net/xfrm/xfrm_user.c:1381: warning: unused variable 'sessionid' net/xfrm/xfrm_user.c:1380: warning: unused variable 'loginuid' net/xfrm/xfrm_user.c: In function 'xfrm_add_pol_expire': net/xfrm/xfrm_user.c:1620: warning: unused variable 'sid' net/xfrm/xfrm_user.c:1619: warning: unused variable 'sessionid' net/xfrm/xfrm_user.c:1618: warning: unused variable 'loginuid' net/xfrm/xfrm_user.c: In function 'xfrm_add_sa_expire': net/xfrm/xfrm_user.c:1658: warning: unused variable 'sid' net/xfrm/xfrm_user.c:1657: warning: unused variable 'sessionid' net/xfrm/xfrm_user.c:1656: warning: unused variable 'loginuid' Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2008 1 次提交
-
-
由 Eric Paris 提交于
Previously I added sessionid output to all audit messages where it was available but we still didn't know the sessionid of the sender of netlink messages. This patch adds that information to netlink messages so we can audit who sent netlink messages. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 22 4月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
As it stands it's impossible to use any authentication algorithms with an ID above 31 portably. It just happens to work on x86 but fails miserably on ppc64. The reason is that we're using a bit mask to check the algorithm ID but the mask is only 32 bits wide. After looking at how this is used in the field, I have concluded that in the long term we should phase out state matching by IDs because this is made superfluous by the reqid feature. For current applications, the best solution IMHO is to allow all algorithms when the bit masks are all ~0. The following patch does exactly that. This bug was identified by IBM when testing on the ppc64 platform using the NULL authentication algorithm which has an ID of 251. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
The IPv6 BEET output function is incorrectly including the inner header in the payload to be protected. This causes a crash as the packet doesn't actually have that many bytes for a second header. The IPv4 BEET output on the other hand is broken when it comes to handling an inner IPv6 header since it always assumes an inner IPv4 header. This patch fixes both by making sure that neither BEET output function touches the inner header at all. All access is now done through the protocol-independent cb structure. Two new attributes are added to make this work, the IP header length and the IPv4 option length. They're filled in by the inner mode's output function. Thanks to Joakim Koskela for finding this problem. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Each MIPv6 XFRM state (DSTOPT/RH2) holds either destination or source address to be mangled in the IPv6 header (that is "CoA"). On Inter-MN communication after both nodes binds each other, they use route optimized traffic two MIPv6 states applied, and both source and destination address in the IPv6 header are replaced by the states respectively. The packet format is correct, however, next-hop routing search are not. This patch fixes it by remembering address pairs for later states. Based on patch from Masahide NAKAMURA <nakam@linux-ipv6.org>. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Kazunori MIYAZAWA 提交于
Signed-off-by: NKazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2008 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 2月, 2008 1 次提交
-
-
由 Timo Teras 提交于
Change xfrm_policy and xfrm_state walking algorithm from O(n^2) to O(n). This is achieved adding the entries to one more list which is used solely for walking the entries. This also fixes some races where the dump can have duplicate or missing entries when the SPD/SADB is modified during an ongoing dump. Dumping SADB with 20000 entries using "time ip xfrm state" the sys time dropped from 1.012s to 0.080s. Signed-off-by: NTimo Teras <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
Al Viro spotted a bogus use of u64 on the input sequence number which is big-endian. This patch fixes it by giving the input sequence number its own member in the xfrm_skb_cb structure. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2008 2 次提交
-
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds support for combined mode algorithms with GCM being the first algorithm supported. Combined mode algorithms can be added through the xfrm_user interface using the new algorithm payload type XFRMA_ALG_AEAD. Each algorithms is identified by its name and the ICV length. For the purposes of matching algorithms in xfrm_tmpl structures, combined mode algorithms occupy the same name space as encryption algorithms. This is in line with how they are negotiated using IKE. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 21 次提交
-
-
由 WANG Cong 提交于
Since __xfrm_policy_destroy is used to destory the resources allocated by xfrm_policy_alloc. So using the name __xfrm_policy_destroy is not correspond with xfrm_policy_alloc. Rename it to xfrm_policy_destroy. And along with some instances that call xfrm_policy_alloc but not using xfrm_policy_destroy to destroy the resource, fix them. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
For five years we had two xfrm_policy_flush prototypes and every time that function's signature changed people have been diligently updating both of them without noticing :) Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
This patch adds a number of new IPsec audit events to meet the auditing requirements of RFC4303. This includes audit hooks for the following events: * Could not find a valid SA [sections 2.1, 3.4.2] . xfrm_audit_state_notfound() . xfrm_audit_state_notfound_simple() * Sequence number overflow [section 3.3.3] . xfrm_audit_state_replay_overflow() * Replayed packet [section 3.4.3] . xfrm_audit_state_replay() * Integrity check failure [sections 3.4.4.1, 3.4.4.2] . xfrm_audit_state_icvfail() While RFC4304 deals only with ESP most of the changes in this patch apply to IPsec in general, i.e. both AH and ESP. The one case, integrity check failure, where ESP specific code had to be modified the same was done to the AH code for the sake of consistency. Signed-off-by: NPaul Moore <paul.moore@hp.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Moore 提交于
This patch fixes a number of small but potentially troublesome things in the XFRM/IPsec code: * Use the 'audit_enabled' variable already in include/linux/audit.h Removed the need for extern declarations local to each XFRM audit fuction * Convert 'sid' to 'secid' everywhere we can The 'sid' name is specific to SELinux, 'secid' is the common naming convention used by the kernel when refering to tokenized LSM labels, unfortunately we have to leave 'ctx_sid' in 'struct xfrm_sec_ctx' otherwise we risk breaking userspace * Convert address display to use standard NIP* macros Similar to what was recently done with the SPD audit code, this also also includes the removal of some unnecessary memcpy() calls * Move common code to xfrm_audit_common_stateinfo() Code consolidation from the "less is more" book on software development * Proper spacing around commas in function arguments Minor style tweak since I was already touching the code Signed-off-by: NPaul Moore <paul.moore@hp.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
This statistics is shown factor dropped by transformation at /proc/net/xfrm_stat for developer. It is a counter designed from current transformation source code and defined as linux private MIB. See Documentation/networking/xfrm_proc.txt for the detail. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
IPv6 specific thing is wrongly removed from transformation at net-2.6.25. This patch recovers it with current design. o Update "path" of xfrm_dst since IPv6 transformation should care about routing changes. It is required by MIPv6 and off-link destined IPsec. o Rename nfheader_len which is for non-fragment transformation used by MIPv6 to rt6i_nfheader_len as IPv6 name space. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch adds the functions xfrm_decode_session_reverse and xfrmX_policy_check_reverse so we can get the reverse flow to perform such a lookup. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds the xfrm_input_state helper function which returns the current xfrm state being processed on the input path given an sk_buff. This is currently only used by xfrm_input but will be used by ESP upon asynchronous resumption. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
The following patch create the usual static inline functions to disable the xfrm6_init and xfrm6_fini function when XFRM is off. That's allow to remove some ifdef and make the code a little more clear. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
The xfrm initialization function does not return any error code, so if there is an error, the caller can not be advise of that. This patch checks the return code of the different called functions in order to return a successful or failed initialization. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Acked-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
When merging the input paths of IPsec I accidentally left a hard-coded AF_INET for the state lookup call. This broke IPv6 obviously. This patch fixes by getting the input callers to specify the family through skb->cb. Credit goes to Kazunori Miyazawa for diagnosing this and providing an initial patch. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
After changeset: [NETFILTER]: Introduce NF_INET_ hook values It always evaluates to NF_INET_POST_ROUTING. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds support for async resumptions on input. To do so, the transform would return -EINPROGRESS and subsequently invoke the function xfrm_input_resume to resume processing. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The nhoff field isn't actually necessary in xfrm_input. For tunnel mode transforms we now throw away the output IP header so it makes no sense to fill in the nexthdr field. For transport mode we can now let the function transport_finish do the setting and it knows where the nexthdr field is. The only other thing that needs the nexthdr field to be set is the header extraction code. However, we can simply move the protocol extraction out of the generic header extraction. We want to minimise the amount of info we have to carry around between transforms as this simplifies the resumption process for async crypto. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Currently x->lastused is u64 which means that it cannot be read/written atomically on all architectures. David Miller observed that the value stored in it is only an unsigned long which is always atomic. So based on his suggestion this patch changes the internal representation from u64 to unsigned long while the user-interface still refers to it as u64. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As part of the work on asynchronous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common input code. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds support for async resumptions on output. To do so, the transform would return -EINPROGRESS and subsequently invoke the function xfrm_output_resume to resume processing. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As part of the work on asynchrnous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common output code. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the input path so that each function deals with one family only. In particular, the functions xfrm4_extract_inut/xfrm6_extract_inut moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the inner mode input functions to modify the inner IP header. In this way the input function no longer has to know about the outer address family. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the output path so that each function deals with one family only. In particular, the functions xfrm4_extract_output/xfrm6_extract_output moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the outer mode output functions to write the outer IP header. In this way the output function no longer has to know about the inner address family. Since the extract functions are only called by tunnel modes (the only modes that can support inter-family transforms), I've also moved the xfrm*_tunnel_check_size calls into them. This allows the correct ICMP message to be sent as opposed to now where you might call icmp_send with an IPv6 packet and vice versa. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Half of the code in xfrm4_bundle_create and xfrm6_bundle_create are common. This patch extracts that logic and puts it into xfrm_bundle_create. The rest of it are then accessed through afinfo. As a result this fixes the problem with inter-family transforms where we treat every xfrm dst in the bundle as if it belongs to the top family. This patch also fixes a long-standing error-path bug where we may free the xfrm states twice. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-