- 01 6月, 2016 3 次提交
-
-
由 Daniel Vetter 提交于
This reverts the following patches: d55dbd06 drm/i915: Allow nonblocking update of pageflips. 15c86bdb drm/i915: Check for unpin correctness. 95c2ccdc Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates" a6747b73 drm/i915: Make unpin async. 03f476e1 drm/i915: Prepare connectors for nonblocking checks. 2099deff drm/i915: Pass atomic states to fbc update functions. ee7171af drm/i915: Remove reset_counter from intel_crtc. 2ee004f7 drm/i915: Remove queue_flip pointer. b8d2afae drm/i915: Remove use_mmio_flip kernel parameter. 8dd634d9 drm/i915: Remove cs based page flip support. 143f73b3 drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3. 84fc494b drm/i915: Add the exclusive fence to plane_state. 6885843a drm/i915: Convert flip_work to a list. aa420ddd drm/i915: Allow mmio updates on all platforms, v2. afee4d87 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates" "drm/i915: Allow nonblocking update of pageflips" should have been split up, misses a proper commit message and seems to cause issues in the legacy page_flip path as demonstrated by kms_flip. "drm/i915: Make unpin async" doesn't handle the unthrottled cursor updates correctly, leading to an apparent pin count leak. This is caught by the WARN_ON in i915_gem_object_do_pin which screams if we have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins. Unfortuantely we can't just revert these two because this patch series came with a built-in bisect breakage in the form of temporarily removing the unthrottled cursor update hack for legacy cursor ioctl. Therefore there's no other option than to revert the entire pile :( There's one tiny conflict in intel_drv.h due to other patches, nothing serious. Normally I'd wait a bit longer with doing a maintainer revert, but since the minimal set of patches we need to revert (due to the bisect breakage) is so big, time is running out fast. And very soon (especially after a few attempts at fixing issues) it'll be really hard to revert things cleanly. Lessons learned: - Not a good idea to rush the review (done by someone fairly new to the area) and not make sure domain experts had a chance to read it. - Patches should be properly split up. I only looked at the two patches that should be reverted in detail, but both look like the mix up different things in one patch. - Patches really should have proper commit messages. Especially when doing more than one thing, and especially when touching critical and tricky core code. - Building a patch series and r-b stamping it when it has a built-in bisect breakage is not a good idea. - I also think we need to stop building up technical debt by postponing atomic igt testcases even longer. I think it's clear that there's enough corner cases in this beast that we really need to have the testcases _before_ the next step lands. (cherry picked from commit 5a21b665 from drm-intel-next-queeud) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Acked-by: NDave Airlie <airlied@redhat.com> Acked-by: NJani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
由 Daniel Vetter 提交于
No dev->struct_mutex anywhere to be seen. Cc: Eric Anholt <eric@anholt.net> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-16-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Since my last struct_mutex crusade someone escaped! This already has the advantage that for the common case when someone else holds a ref the unref won't even acquire dev->struct_mutex. And I'm working on code to allow drivers to completely opt-out of any and all dev->struct_mutex usage, but that only works if they use the _unlocked variants everywhere. v2: Drop comment too. v3: Drop the other comment too. Cc: Eric Anholt <eric@anholt.net> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-15-git-send-email-daniel.vetter@ffwll.ch
-
- 31 5月, 2016 11 次提交
-
-
由 Daniel Vetter 提交于
Code stolen from gma500. This is just a minor bit of safety code that I spotted and figured it might be useful if we put it into the core. This is to make the get_gamma ioctl reflect likely reality even before the first set_gamma ioctl call. v2 on irc: Extend commit message per Maarten's suggestions. Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-2-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
No dev->struct_mutex anywhere to be seen. Cc: seanpaul@chromium.org Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-17-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
qxl doesn't have any functions for setting the gamma table, so this is completely defunct. Not nice to lie to userspace, so let's stop! Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-10-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Again the fbdev emulation gamma_set/get functions are only needed for drivers that try to also use 8bpp paletted mode. Which msm doesn't, so this is dead code. Let's rip it out. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-7-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
The core does this for us already. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-6-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
DRM fbdev emulation only supports pallete_color with depth == 8, and truecolor with depth > 8. Handling depth == 16 for palettes is hence dead code, let's remove it. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-3-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
No dev->struct_mutex anywhere to be seen. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-28-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
No dev->struct_mutex anywhere to be seen. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Acked-by: NXinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-27-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
No dev->struct_mutex anywhere to be seen. Cc: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-26-git-send-email-daniel.vetter@ffwll.ch
-
由 Lukas Wunner 提交于
So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7d ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de
-
由 Gerd Hoffmann 提交于
Needed for multihead setups where we can have disabled outputs and therefore plane->crtc can be NULL. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464609806-22013-1-git-send-email-kraxel@redhat.com
-
- 30 5月, 2016 3 次提交
-
-
由 Daniel Vetter 提交于
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Acked-by: NJani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464599449-12509-1-git-send-email-daniel.vetter@ffwll.ch
-
由 Liu Ying 提交于
When a CRTC is going to be disabled, it's state may contain a display mode with zeroed content. This could be reproduced by HDMI cable hotplug out operation with legacy fbdev support in dual display cases. It would confuse driver's CRTC callback ->mode_fixup and make the total state be rejected. So, let's don't call the callback for the CRTC. Signed-off-by: NLiu Ying <gnuiyl@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464341754-7087-1-git-send-email-gnuiyl@gmail.com
-
由 Valdis Kletnieks 提交于
Fix egregious typo in comment. Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/10576.1464589598@turing-police.cc.vt.edu
-
- 28 5月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 5月, 2016 4 次提交
-
-
由 Jeff Mahoney 提交于
The DRM_AMD_ACP option doesn't have any dependencies and selects MFD_CORE, which results in MFD_CORE=y. Since the code is only called from DRM_AMDGPU, it should depend on it. Adding the dependency results in MFD_CORE being selected as a module again if amdgpu is also a module. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mario Kleiner 提交于
When porting the hdmi deep color detection code from radeon-kms to amdgpu-kms apparently some kind of copy and paste error happened, attaching an else branch to the wrong if statement. The result is that hdmi deep color mode is always disabled, regardless of gpu and display capabilities and user wishes, as the code mistakenly thinks that the display doesn't provide the required max_tmds_clock limit and falls back to 8 bpc. This patch fixes deep color support, as tested on a R9 380 Tonga Pro + suitable display, and should be backported to all kernels with amdgpu-kms support. Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
Using wrong counter for walking fences. Fixes a crash when unloading the driver. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Matthew Auld 提交于
This patch aims to replace the roll-your-own seqlock implementation with full-blown seqlock'. We also remove the timestamp ring-buffer in favour of single timestamp/count pair protected by a seqlock. In turn this means we can now increment the vblank freely without the need for clamping. v2: - reduce the scope of the seqlock, keeping vblank_time_lock - make the seqlock per vblank_crtc, so multiple readers aren't blocked by the writer Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NMatthew Auld <matthew.auld@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462890088-18194-1-git-send-email-matthew.auld@intel.com
-
- 24 5月, 2016 3 次提交
-
-
由 Michal Hocko 提交于
amdgpu_mn_get which is called during ioct path relies on mmap_sem for write. If the waiting task gets killed by the oom killer it would block oom_reaper from asynchronous address space reclaim and reduce the chances of timely OOM resolving. Wait for the lock in the killable mode and return with EINTR if the task got killed while waiting. [arnd@arndb.de: use ERR_PTR() to return from amdgpu_mn_get] Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
radeon_mn_get which is called during ioct path relies on mmap_sem for write. If the waiting task gets killed by the oom killer it would block oom_reaper from asynchronous address space reclaim and reduce the chances of timely OOM resolving. Wait for the lock in the killable mode and return with EINTR if the task got killed while waiting. Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
i915_gem_mmap_ioctl relies on mmap_sem for write. If the waiting task gets killed by the oom killer it would block oom_reaper from asynchronous address space reclaim and reduce the chances of timely OOM resolving. Wait for the lock in the killable mode and return with EINTR if the task got killed while waiting. Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 5月, 2016 15 次提交
-
-
由 Chris Wilson 提交于
Following a GPU hang, we break out of the request loop in order to unlock the struct_mutex for use by the GPU reset. However, if we retire all the requests at that moment, we cannot identify the guilty request after performing the reset. v2: Not automatically retiring requests forces us to recheck for available ringspace. Fixes: f4457ae7 ("drm/i915: Prevent leaking of -EIO from i915_wait_request()") Testcase: igt/gem_reset_stats/ban-* Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Tested-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463137042-9669-4-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit e075a32f) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Combine the near identical implementations of intel_logical_ring_begin() and intel_ring_begin() - the only difference is that the logical wait has to check for a matching ring (which is assumed by legacy). In the process some debug messages are culled as there were following a WARN if we hit an actual error. v2: Updated commentary Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-12-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 987046ad) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
When we resume the watermark register may contain some BIOS leftovers, or just the hardware reset values. We should ignore those as the pipes will be off anyway, and so frobbing around with intermediate watermarks doesn't make much sense. In fact I think we should just throw the skip_intermediate_wm flag out, and instead properly sanitize the "active" watermarks to match the current plane and pipe states. The actual wm state readout might also need a bit of work. But for now, let's continue with the skip_intermediate_wm to keep the fix more minimal. Fixes this sort of errors on resume [drm:ilk_validate_pipe_wm] LP0 watermark invalid [drm:intel_crtc_atomic_check] No valid intermediate pipe watermarks are possible [drm:intel_display_resume [i915]] *ERROR* Restoring old state failed with -22 and a boatload of subsequent modeset BAT fails on my ILK. v2: - Rebase; the SKL atomic WM patches that just landed changed the WM structure fields in intel_crtc_state slightly. (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463159442-20478-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit e3d5457c) [Jani: rebase on drm-next while cherry-picking] Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Heinrich Schuchardt 提交于
Do not dereference node before the check if node is NULL. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463602639-4861-1-git-send-email-xypron.glpk@gmx.de
-
由 Daniel Vetter 提交于
The default of 0 is 500us of link training, but that's not enough for some platforms. Decoding this correctly means we're using 2.5ms of link training on these platforms, which fixes flickering issues associated with enabling PSR. v2: Unbotch the math a bit. v3: Drop debug hunk. v4: Improve commit message. Tested-by: NLyude <cpaul@redhat.com> Cc: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Tested-by: fritsch@kodi.tv Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-2-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit 50db1390) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Philipp Zabel 提交于
The component master driver imx-drm-core matches component devices using their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during probing. Before that, of_node was set and caused an of: modalias to be used instead of the platform: modalias, which broke module autoloading. On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc probe function calls component_add, component matching in imx-drm-core fails. While dev->of_node will be set once the next component tries to bring up the component master, imx-drm-core component binding will never succeed if one of the crtc devices is probed last. Add of_node to the component platform data and match against the pdata->of_node instead of dev->of_node in imx-drm-core to work around this problem. Cc: <stable@vger.kernel.org> # 4.4.x Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading") Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Tested-by: NFabio Estevam <fabio.estevam@nxp.com> Tested-by: NLothar Waßmann <LW@KARO-electronics.de> Tested-by: NHeiko Schocher <hs@denx.de> Tested-by: NChris Ruehl <chris.ruehl@gtsys.com.hk>
-
由 Ramalingam C 提交于
In BXT DSI there is no regs programmed with few horizontal timings in Pixels but txbyteclkhs.. So retrieval process adds some ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. Actually here for the given adjusted_mode, we are calculating the value programmed to the port and then back to the horizontal timing param in pixels. This is the expected value at the end of get_config, including roundup errors. And if that is same as retrieved value from port, then retrieved (HW state) adjusted_mode's horizontal timings are corrected to match with SW state to nullify the errors. Signed-off-by: NRamalingam C <ramalingam.c@intel.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-2-git-send-email-ramalingam.c@intel.com (cherry picked from commit 042ab0c3) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
When we read out the watermark state from the hardware we're supposed to transfer that into the active watermarks, but currently we fail to any part of the active watermarks that isn't explicitly written. Let's clear it all upfront. Looks like this has been like this since the beginning, when I added the readout. No idea why I didn't clear it up. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 243e6a44 ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()") Cc: stable@vger.kernel.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Signed-off-by: NMatt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463151318-14719-2-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 15606534) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
SKL DPLLs shouldn't be called DPPLs. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 2edd6443 ("drm/i915: Use a table to initilize shared dplls") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462993473-8254-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com> (cherry picked from commit d5aab9d4) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
With the introduction of a distinct engine->id vs the hardware id, we need to fix up the value we use for selecting the target engine when signaling a semaphore. Note that these values can be merged with engine->guc_id. Fixes: de1add36 Cc: stable@vger.kernel.org # v4.6 Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461932305-14637-3-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 215a7e32) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
Set the lane count for HDMI to 4. This will make it easier to unduplicate CHV phy code. This also fixes the the soft reset programming for HDMI with CHV. After commit a8f327fb ("drm/i915: Clean up CHV lane soft reset programming"), it wouldn't set the right bits for PCS23 since it relied on a lane count that was never set. v2: Set lane_count in *_get_config() to please state checker. (0day) v3: Set lane_count for DDI in DVI mode too. (CI) v4: Add note about CHV soft lane reset. (Ander) Fixes: a8f327fb ("drm/i915: Clean up CHV lane soft reset programming") Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: NJim Bride <jim.bride@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-2-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit d4d6279a) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ramalingam C 提交于
Retriving the horizontal timings from the port registers as part of get_config(). This fixes a division by zero: [ 56.916557] divide error: 0000 [#1] PREEMPT SMP [ 56.921741] Modules linked in: i915(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart cf g80211 rfkill binfmt_misc ax88179_178a kvm_intel kvm irqbypass crc32c_intel efivars tpm_tis tpm fuse [ 56.944106] CPU: 3 PID: 1097 Comm: modprobe Not tainted 4.6.0-rc4+ #433 [ 56.951501] Hardware name: Intel Corp. Broxton M/RVP, BIOS BXT1RVPA.X64.0131.B30.1604142217 04/14/2016 [ 56.961908] task: ffff88007a854d00 ti: ffff88007aea0000 task.ti: ffff88007aea0000 [ 56.970273] RIP: 0010:[<ffffffffa01235b2>] [<ffffffffa01235b2>] drm_mode_hsync+0x22/0x40 [drm] [ 56.980043] RSP: 0018:ffff88007aea3788 EFLAGS: 00010206 [ 56.985982] RAX: 000000000788b600 RBX: ffff880073c22108 RCX: 0000000000000000 [ 56.993957] RDX: 0000000000000000 RSI: ffff88007ab06800 RDI: ffff880073c22108 [ 57.001935] RBP: ffff88007aea3788 R08: 0000000000000001 R09: ffff880073c221e8 [ 57.009903] R10: ffff880073c22108 R11: 0000000000000001 R12: ffff88007a300000 [ 57.017872] R13: ffff880073c22000 R14: ffff880175f78000 R15: ffff880175f78798 [ 57.025849] FS: 00007f105d3e6700(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 [ 57.034894] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.041317] CR2: 00007f4d485101d0 CR3: 000000007a820000 CR4: 00000000003406e0 [ 57.049292] Stack: [ 57.051539] ffff88007aea37a0 ffffffffa043b632 ffff880175f787c8 ffff88007aea3810 [ 57.059825] ffffffffa043d59e ffff880175f787b0 ffff88007ab68c00 ffff88007aea37f0 [ 57.068128] ffff880073c221e8 ffff880073c22108 ffff880175f78780 ffff880100000000 [ 57.076430] Call Trace: [ 57.079254] [<ffffffffa043b632>] intel_mode_from_pipe_config+0x82/0xb0 [i915] [ 57.087405] [<ffffffffa043d59e>] intel_modeset_setup_hw_state+0x55e/0xd60 [i915] [ 57.095847] [<ffffffffa043ff94>] intel_modeset_init+0x8e4/0x1630 [i915] [ 57.103415] [<ffffffffa047bcf0>] i915_driver_load+0xbe0/0x1980 [i915] [ 57.110745] [<ffffffffa0116c19>] drm_dev_register+0xa9/0xc0 [drm] [ 57.117681] [<ffffffffa011921d>] drm_get_pci_dev+0x8d/0x1e0 [drm] [ 57.124600] [<ffffffff8195f942>] ? _raw_spin_unlock_irqrestore+0x42/0x70 [ 57.132253] [<ffffffffa03b0384>] i915_pci_probe+0x34/0x50 [i915] [ 57.139070] [<ffffffff8149c375>] local_pci_probe+0x45/0xa0 [ 57.145303] [<ffffffff8149d300>] ? pci_match_device+0xe0/0x110 [ 57.151924] [<ffffffff8149d6cb>] pci_device_probe+0xdb/0x130 [ 57.158355] [<ffffffff81579b93>] driver_probe_device+0x223/0x440 [ 57.165169] [<ffffffff81579e85>] __driver_attach+0xd5/0x100 [ 57.171500] [<ffffffff81579db0>] ? driver_probe_device+0x440/0x440 [ 57.178510] [<ffffffff81577736>] bus_for_each_dev+0x66/0xa0 [ 57.184841] [<ffffffff815793de>] driver_attach+0x1e/0x20 [ 57.190881] [<ffffffff81578d6e>] bus_add_driver+0x1ee/0x280 [ 57.197212] [<ffffffff8157abc0>] driver_register+0x60/0xe0 [ 57.203447] [<ffffffff8149bc50>] __pci_register_driver+0x60/0x70 [ 57.210285] [<ffffffffa0119450>] drm_pci_init+0xe0/0x110 [drm] [ 57.216911] [<ffffffff810dcd8d>] ? trace_hardirqs_on+0xd/0x10 [ 57.223434] [<ffffffffa023a000>] ? 0xffffffffa023a000 [ 57.229237] [<ffffffffa023a092>] i915_init+0x92/0x99 [i915] [ 57.235570] [<ffffffff810003db>] do_one_initcall+0xab/0x1d0 [ 57.241900] [<ffffffff810f9eef>] ? rcu_read_lock_sched_held+0x7f/0x90 [ 57.249205] [<ffffffff81204f18>] ? kmem_cache_alloc_trace+0x248/0x2b0 [ 57.256509] [<ffffffff811a5eee>] ? do_init_module+0x27/0x1d9 [ 57.262934] [<ffffffff811a5f26>] do_init_module+0x5f/0x1d9 [ 57.269167] [<ffffffff8112392f>] load_module+0x20ef/0x27b0 [ 57.275401] [<ffffffff8111f8e0>] ? store_uevent+0x40/0x40 [ 57.281541] [<ffffffff81124243>] SYSC_finit_module+0xc3/0xf0 [ 57.287969] [<ffffffff8112428e>] SyS_finit_module+0xe/0x10 [ 57.294203] [<ffffffff81960069>] entry_SYSCALL_64_fastpath+0x1c/0xac [ 57.301406] Code: ff 5d c3 66 0f 1f 44 00 00 0f 1f 44 00 00 8b 87 d8 00 00 00 55 48 89 e5 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 5d c3 [ 57.322964] RIP [<ffffffffa01235b2>] drm_mode_hsync+0x22/0x40 [drm] [ 57.330103] RSP <ffff88007aea3788> [ 57.334276] ---[ end trace d414224cb2e2a4cf ]--- [ 57.339861] modprobe (1097) used greatest stack depth: 12048 bytes left Fixes: 6f0e7535 ("drm/i915/BXT: Get pipe conf from the port registers") Signed-off-by: NRamalingam C <ramalingam.c@intel.com> Acked-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-1-git-send-email-ramalingam.c@intel.com (cherry picked from commit cefc4e18) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed309 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461744121-27051-1-git-send-email-chris@chris-wilson.co.ukTested-by: NMika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit bcbdb6d0) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
Move the intel_enable_gtt() call to happen before we touch the GTT during resume. Right now it's done way too late. Before commit ebb7c78d ("agp/intel-gtt: Only register fake agp driver for gen1") it was actually done earlier on account of also getting called from the resume hook of the fake agp driver. With the fake agp driver no longer getting registered we must move the call up. The symptoms I've seen on my 830 machine include lowmem corruption, other kinds of memory corruption, and straight up hung machine during or just after resume. Not really sure what causes the memory corruption, but so far I've not seen any with this fix. I think we shouldn't really need to call this during init, but we have been doing that so I've decided to keep the call. However moving that call earlier could be prudent as well. Doing it right after the intel-gtt probe seems appropriate. Also tested this on 946gz,elk,ilk and all seemed quite happy with this change. v2: Reorder init_hw vs. enable_hw functions (Chris) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: ebb7c78d ("agp/intel-gtt: Only register fake agp driver for gen1") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462559755-353-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit ac840ae5) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Ville Syrjälä 提交于
DP dual mode type 1 DVI adaptors aren't required to implement any registers, so it's a bit hard to detect them. The best way would be to check the state of the CONFIG1 pin, but we have no way to do that. So as a last resort, check the VBT to see if the HDMI port is in fact a dual mode capable DP port. v2: Deal with VBT code reorganization Deal with DRM_DP_DUAL_MODE_UNKNOWN Reduce DEVICE_TYPE_DP_DUAL_MODE_BITS a bit Accept both DP and HDMI dvo_port in VBT as my BSW at least declare its DP port as HDMI :( v3: Ignore DEVICE_TYPE_NOT_HDMI_OUTPUT (Shashank) Cc: stable@vger.kernel.org Cc: Tore Anderson <tore@fud.no> Reported-by: NTore Anderson <tore@fud.no> Fixes: 7a0baa62 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462362322-31278-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NShashank Sharma <shashank.sharma@intel.com> (cherry picked from commit d6199256) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-