Eventually this interface will support versions 3 and 4 of the rpcbind
protocol, which will allow the Linux RPC server to register services on
IPv6 addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to
choose the mode for mapping NFS thread service pools to CPUs.  Values are:

auto	    choose a mapping mode heuristically
global	    (default, same as the pre-2.6.19 code) a single global pool
percpu	    one pool per CPU
pernode	    one pool per NUMA node

Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch
makes the default "global".

The pool mode can be changed after boot/modprobe using /sys, if the NFS and
lockd services have been shut down.  A useful side effect of this change is to
fix a small memory leak when unloading the module.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the last thread of nfsd exits, it shuts down all related sockets.  It
currently uses svc_close_socket to do this, but that only is immediately
effective if the socket is not SK_BUSY.

If the socket is busy - i.e.  if a request has arrived that has not yet been
processes - svc_close_socket is not effective and the shutdown process spins.

So create a new svc_force_close_socket which removes the SK_BUSY flag is set
and then calls svc_close_socket.

Also change some open-codes loops in svc_destroy to use
list_for_each_entry_safe.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We frequently need the maximum number of possible processors in order to
allocate arrays for all processors.  So far this was done using
highest_possible_processor_id().  However, we do need the number of
processors not the highest id.  Moreover the number was so far dynamically
calculated on each invokation.  The number of possible processors does not
change when the system is running.  We can therefore calculate that number
once.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

highest_possible_node_id() is currently used to calculate the last possible
node idso that the network subsystem can figure out how to size per node
arrays.

I think having the ability to determine the maximum amount of nodes in a
system at runtime is useful but then we should name this entry
correspondingly, it should return the number of node_ids, and the the value
needs to be setup only once on bootup.  The node_possible_map does not
change after bootup.

This patch introduces nr_node_ids and replaces the use of
highest_possible_node_id().  nr_node_ids is calculated on bootup when the
page allocators pagesets are initialized.

[deweerdt@free.fr: fix oops]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If you lose this race, it can iput a socket inode twice and you get a BUG
in fs/inode.c

When I added the option for user-space to close a socket, I added some
cruft to svc_delete_socket so that I could call that function when closing
a socket per user-space request.

This was the wrong thing to do.  I should have just set SK_CLOSE and let
normal mechanisms do the work.

Not only wrong, but buggy.  The locking is all wrong and it openned up a
race where-by a socket could be closed twice.

So this patch:
  Introduces svc_close_socket which sets SK_CLOSE then either leave
  the close up to a thread, or calls svc_delete_socket if it can
  get SK_BUSY.

  Adds a bias to sk_busy which is removed when SK_DEAD is set,
  This avoid races around shutting down the socket.

  Changes several 'spin_lock' to 'spin_lock_bh' where the _bh
  was missing.

Bugzilla-url: http://bugzilla.kernel.org/show_bug.cgi?id=7916Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tk_pid field is an unsigned short.  The proper print format specifier for
that type is %5u, not %4d.

Also clean up some miscellaneous print formatting nits.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Also remove {NFSD,RPC}_PARANOIA as having the defines doesn't really add
anything.

The printks covered by RPC_PARANOIA were triggered by badly formatted
packets and so should be ratelimited.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to silly typos, if the nfs versions are explicitly set, no NFSACL versions
get enabled.

Also improve an error message that would have made this bug a little easier to
find.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All kcalloc() calls of the form "kcalloc(1,...)" are converted to the
equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect
ordering of the first two arguments are fixed.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later.  That error status is not currently
propagated back.

So:
  Change nlm_fopen to return nlm error codes (rather than a private
  protocol) and define a new nlm_drop_reply code.
  Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
  when this error comes back.
  Cause svc_process to drop a request which returns a status of
  rpc_drop_reply.

[akpm@osdl.org: fix warning storm]
Cc: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is some confusion about the meaning of 'bufsz' for a sunrpc server.
In some cases it is the largest message that can be sent or received.  In
other cases it is the largest 'payload' that can be included in a NFS
message.

In either case, it is not possible for both the request and the reply to be
this large.  One of the request or reply may only be one page long, which
fits nicely with NFS.

So we remove 'bufsz' and replace it with two numbers: 'max_payload' and
'max_mesg'.  Max_payload is the size that the server requests.  It is used
by the server to check the max size allowed on a particular connection:
depending on the protocol a lower limit might be used.

max_mesg is the largest single message that can be sent or received.  It is
calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and
with PAGE_SIZE added to overhead.  Only one of the request and reply may be
this size.  The other must be at most one page.

Cc: Greg Banks <gnb@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The rpc reply has multiple levels of error returns.  The code here contributes
to the confusion by using "accept_statp" for a pointer to what the rfc (and
wireshark, etc.) refer to as the "reply_stat".  (The confusion is compounded
by the fact that the rfc also has an "accept_stat" which follows the
reply_stat in the succesful case.)
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The NFSACL patches introduced support for multiple RPC services listening on
the same transport.  However, only the first of these services was registered
with portmapper.  This was perfectly fine for nfsacl, as you traditionally do
not want these to show up in a portmapper listing.

The patch below changes the default behavior to always register all services
listening on a given transport, but retains the old behavior for nfsacl
services.
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The limit over UDP remains at 32K.  Also, make some of the apparently
arbitrary sizing constants clearer.

The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of
the rqstp.  This allows it to be different for different protocols (udp/tcp)
and also allows it to depend on the servers declared sv_bufsiz.

Note that we don't actually increase sv_bufsz for nfs yet.  That comes next.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256.  This
means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES.

struct svc_rqst contains two such arrays.  However the there are never more
that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is
needed.

The two arrays are for the pages holding the request, and the pages holding
the reply.  Instead of two arrays, we can simply keep an index into where the
first reply page is.

This patch also removes a number of small inline functions that probably
server to obscure what is going on rather than clarify it, and opencode the
needed functionality.

Also remove the 'rq_restailpage' variable as it is *always* 0.  i.e.  if the
response 'xdr' structure has a non-empty tail it is always in the same pages
as the head.

 check counters are initilised and incr properly
 check for consistant usage of ++ etc
 maybe extra some inlines for common approach
 general review
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: Magnus Maatta <novell@kiruna.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Actually implement multiple pools.  On NUMA machines, allocate a svc_pool per
NUMA node; on SMP a svc_pool per CPU; otherwise a single global pool.  Enqueue
sockets on the svc_pool corresponding to the CPU on which the socket bh is run
(i.e.  the NIC interrupt CPU).  Threads have their cpu mask set to limit them
to the CPUs in the svc_pool that owns them.

This is the patch that allows an Altix to scale NFS traffic linearly
beyond 4 CPUs and 4 NICs.

Incorporates changes and feedback from Neil Brown, Trond Myklebust, and
Christoph Hellwig.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently knfsd keeps its own list of all nfsd threads in nfssvc.c; add a new
way of managing the list of all threads in a svc_serv.  Add
svc_create_pooled() to allow creation of a svc_serv whose threads are managed
by the sunrpc code.  Add svc_set_num_threads() to manage the number of threads
in a service, either per-pool or globally across the service.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Split out the list of idle threads and pending sockets from svc_serv into a
new svc_pool structure, and allocate a fixed number (in this patch, 1) of
pools per svc_serv.  The new structure contains a lock which takes over
several of the duties of svc_serv->sv_lock, which is now relegated to
protecting only sv_tempsocks, sv_permsocks, and sv_tmpcnt in svc_serv.

The point is to move the hottest fields out of svc_serv and into svc_pool,
allowing a following patch to arrange for a svc_pool per NUMA node or per CPU.
 This is a major step towards making the NFS server NUMA-friendly.
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Following are 11 patches from Greg Banks which combine to make knfsd more
Numa-aware.  They reduce hitting on 'global' data structures, and create some
data-structures that can be node-local.

knfsd threads are bound to a particular node, and the thread to handle a new
request is chosen from the threads that are attach to the node that received
the interrupt.

The distribution of threads across nodes can be controlled by a new file in
the 'nfsd' filesystem, though the default approach of an even spread is
probably fine for most sites.

Some (old) numbers that show the efficacy of these patches: N == number of
NICs == number of CPUs == nmber of clients.  Number of NUMA nodes == N/2

N	Throughput, MiB/s	CPU usage, % (max=N*100)
	Before	After		Before	After
	---	------	----		-----	-----
	4	312	435		350	228
	6	500	656		501	418
	8	562	804		690	589

This patch:

Move the aging of RPC/TCP connection sockets from the main svc_recv() loop to
a timer which uses a mark-and-sweep algorithm every 6 minutes.  This reduces
the amount of work that needs to be done in the main RPC loop and the length
of time we need to hold the (effectively global) svc_serv->sv_lock.

[akpm@osdl.org: cleanup]
Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.

[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more.  So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

pure s/u32/__be32/

[AV: large part based on Alexey's patches]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* add svc_getnl():
	Take network-endian value from buffer, convert to host-endian
	and return it.
* add svc_putnl():
	Take host-endian value, convert to network-endian and put it
	into a buffer.
* annotate svc_getu32()/svc_putu32() as dealing with network-endian.
* convert to svc_getnl(), svc_putnl().

[AV: in large part it's a carved-up Alexey's patch]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Server-side implementation of rpcsec_gss privacy, which enables encryption of
the payload of every rpc request and response.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a rq_sendfile_ok flag to svc_rqst which will be cleared in the privacy
case so that the wrapping code will get copies of the read data instead of
real page cache pages.  This makes life simpler when we encrypt the response.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This removes more unneeded casts on the return value for kmalloc(),
sock_kmalloc(), and vmalloc().
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of needless casting of kmalloc() return value in net/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This changes some simple "if (x) BUG();" statements to "BUG_ON(x);"
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Jesper Juhl <jesper.juhl@gmail.com>

This is the net/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in net/.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

If an RPC socket is serving multiple programs, then the pg_authenticate of
the first program in the list is called, instead of pg_authenticate for the
program to be run.

This does not cause a problem with any programs in the current kernel, but
could confuse future code.

Also set pg_authenticate for nfsd_acl_program incase it ever gets used.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 The NFS and NFSACL programs run on the same RPC transport.  This patch adds
 support for this by converting svc_program into a chained list of programs
 (server-side).
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Fix up call_header() so that it calls xdr_adjust_iovec().
 Fix calculation of the scratch buffer length in xdr_init_encode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!