- 16 3月, 2016 4 次提交
-
-
由 Tvrtko Ursulin 提交于
Some trivial ones, first pass done with Coccinelle: @@ @@ ( - I915_NUM_RINGS + I915_NUM_ENGINES | - intel_ring_flag + intel_engine_flag | - for_each_ring + for_each_engine | - i915_gem_request_get_ring + i915_gem_request_get_engine | - intel_ring_idle + intel_engine_idle | - i915_gem_reset_ring_status + i915_gem_reset_engine_status | - i915_gem_reset_ring_cleanup + i915_gem_reset_engine_cleanup | - init_ring_lists + init_engine_lists ) But that didn't fully work so I cleaned it up with: for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done v2: Rebase. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Tvrtko Ursulin 提交于
below and a couple manual fixups. @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs *J; + struct intel_engine_cs *engine; ... } @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs J; + struct intel_engine_cs engine; ... } @@ struct drm_i915_private *d; @@ ( - d->ring + d->engine ) @@ struct i915_execbuffer_params *p; @@ ( - p->ring + p->engine ) @@ struct intel_ringbuffer *r; @@ ( - r->ring + r->engine ) @@ struct drm_i915_gem_request *req; @@ ( - req->ring + req->engine ) v2: Script missed the tracepoint code - fixed up by hand. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Tvrtko Ursulin 提交于
@@ identifier func; @@ func(..., struct intel_engine_cs * - ring + engine , ...) { <... - ring + engine ...> } @@ identifier func; type T; @@ T func(..., struct intel_engine_cs * - ring + engine , ...); Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Tvrtko Ursulin 提交于
Done by the Coccinelle script below plus a manual intervention to GEN8_RING_SEMAPHORE_INIT. @@ expression E; @@ - struct intel_engine_cs *ring = E; + struct intel_engine_cs *engine = E; <+... - ring + engine ...+> @@ @@ - struct intel_engine_cs *ring; + struct intel_engine_cs *engine; <+... - ring + engine ...+> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 26 2月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
Elsewhere we have adopted the convention of using '_link' to denote elements in the list (and '_list' for the actual list_head itself), and that the name should indicate which list the link belongs to (and preferrably not just where the link is being stored). s/vma_link/obj_link/ (we iterate over obj->vma_list) s/mm_list/vm_link/ (we iterate over vm->[in]active_list) Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
-
- 16 2月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
Unknown parameters, especially structure padding, are expected to invoke rejection with -EINVAL. v2: similar issue exists for context-create Testcase: igt/gem_ctx_create/invalid-pad Testcase: igt/gem_ctx_bad_destroy/invalid-pad Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89602 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93999Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454690759-31201-1-git-send-email-chris@chris-wilson.co.uk
-
- 29 1月, 2016 2 次提交
-
-
由 Tvrtko Ursulin 提交于
In GuC mode LRC pinning lifetime depends exclusively on the request liftime. Since that is terminated by the seqno update that opens up a race condition between GPU finishing writing out the context image and the driver unpinning the LRC. To extend the LRC lifetime we will employ a similar approach to what legacy ringbuffer submission does. We will start tracking the last submitted context per engine and keep it pinned until it is replaced by another one. Note that the driver unload path is a bit fragile and could benefit greatly from efforts to unify the legacy and exec list submission code paths. At the moment i915_gem_context_fini has special casing for the two which are potentialy not needed, and also depends on i915_gem_cleanup_ringbuffer running before itself. v2: * Move pinning into engine->emit_request and actually fix the reference/unreference logic. (Chris Wilson) * ring->dev can be NULL on driver unload so use a different route towards it. v3: * Rebase. * Handle the reset path. (Chris Wilson) * Exclude default context from the pinning - it is impossible to get it right before default context special casing in general is eliminated. v4: * Rebased & moved context tracking to intel_logical_ring_advance_and_submit. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Issue: VIZ-4277 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Nick Hoath <nicholas.hoath@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453976997-25424-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
由 Tvrtko Ursulin 提交于
Will enable cleaner implementation of a following fix and easier code unification in the future. Idea and code by Chris Wilson. v2: Do not return before last_contexts on engines are unpinned. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk>
-
- 21 1月, 2016 1 次提交
-
-
由 Dave Gordon 提交于
Now that we've eliminated a lot of uses of ring->default_context, we can eliminate the pointer itself. All the engines share the same default intel_context, so we can just keep a single reference to it in the dev_priv structure rather than one in each of the engine[] elements. This make refcounting more sensible too, as we now have a refcount of one for the one pointer, rather than a refcount of one but multiple pointers. From an idea by Chris Wilson. v2: transform an extra instance of ring->default_context introduced by 42f1cae8 drm/i915: Restore inhibiting the load of the default context That patch's commentary includes: v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling The code implementing that now also benefits from the replacement of the multiple (per-ring) pointers to the default context with a single pointer to the unique kernel context. v4: Rebased, remove underused local (Nick Hoath) Signed-off-by: NDave Gordon <david.s.gordon@intel.com> Reviewed-by: NNick Hoath <nicholas.hoath@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1453230175-19330-3-git-send-email-david.s.gordon@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 13 1月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
Following a GPU reset, we may leave the context in a poorly defined state, and reloading from that context will leave the GPU flummoxed. For secondary contexts, this will lead to that context being banned - but currently it is also causing the default context to become banned, leading to turmoil in the shared state. This is a regression from commit 6702cf16 [v4.1] Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Mar 16 16:00:58 2015 +0000 drm/i915: Initialize all contexts which quietly introduced the removal of the MI_RESTORE_INHIBIT on the default context. v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org [danvet: This seems to fix a gpu hand on after the first resume, resulting in any future suspend operation failing with -EIO because the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 42f1cae8) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 06 1月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
Following a GPU reset, we may leave the context in a poorly defined state, and reloading from that context will leave the GPU flummoxed. For secondary contexts, this will lead to that context being banned - but currently it is also causing the default context to become banned, leading to turmoil in the shared state. This is a regression from commit 6702cf16 [v4.1] Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Mon Mar 16 16:00:58 2015 +0000 drm/i915: Initialize all contexts which quietly introduced the removal of the MI_RESTORE_INHIBIT on the default context. v2: Mark the global default context as uninitialized on GPU reset so that the context-local workarounds are reloaded upon re-enabling. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448630935-27377-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org [danvet: This seems to fix a gpu hand on after the first resume, resulting in any future suspend operation failing with -EIO because the gpu seems to be in a funky state. Somehow this patch fixes that.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 10 12月, 2015 2 次提交
-
-
由 Wayne Boyer 提交于
Do some further clean up based on the initial review of drm/i915: Separate cherryview from valleyview. In this case, in i915_gem_alloc_context_obj() only call i915_gem_object_set_cache_level() for Ivy Bridge devices since later platforms don't have L3 control bits in the PTE. v2: Expand comment to mention snooping requirement. (Ville, Imre) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NWayne Boyer <wayne.boyer@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449596332-23470-1-git-send-email-wayne.boyer@intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
-
由 Wayne Boyer 提交于
The cherryview device shares many characteristics with the valleyview device. When support was added to the driver for cherryview, the corresponding device info structure included .is_valleyview = 1. This is not correct and leads to some confusion. This patch changes .is_valleyview to .is_cherryview in the cherryview device info structure and simplifies the IS_CHERRYVIEW macro. Then where appropriate, instances of IS_VALLEYVIEW are replaced with IS_VALLEYVIEW || IS_CHERRYVIEW or equivalent. v2: Use IS_VALLEYVIEW || IS_CHERRYVIEW instead of defining a new macro. Also add followup patches to fix issues discovered during the first review. (Ville) v3: Fix some style issues and one gen check. Remove CRT related changes as CRT is not supported on CHV. (Imre, Ville) v4: Make a few more optimizations. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NWayne Boyer <wayne.boyer@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449692975-14803-1-git-send-email-wayne.boyer@intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Acked-by: NJani Nikula <jani.nikula@intel.com>
-
- 08 12月, 2015 1 次提交
-
-
由 Tvrtko Ursulin 提交于
Commit e9f24d5f Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Mon Oct 5 13:26:36 2015 +0100 drm/i915: Clean up associated VMAs on context destruction Added a warning based on an incorrect assumption that all VMAs in a VM will be on the inactive list at the point last reference to a context and VM is dropped. This is not true because i915_gem_object_retire__read will not put VMA on the inactive list until all activities on the object in question (in all VMs) have been retired. As a consequence, whether or not a context/VM will be destroyed with its VMAs still on the active list, can depend on completely unrelated activities using the same object from a different context or engine. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92638 Testcase: igt/gem_request_retire/retire-vma-not-inactive Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448025816-25584-1-git-send-email-tvrtko.ursulin@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 408952d4) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 24 11月, 2015 1 次提交
-
-
由 Tvrtko Ursulin 提交于
Commit e9f24d5f Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Mon Oct 5 13:26:36 2015 +0100 drm/i915: Clean up associated VMAs on context destruction Added a warning based on an incorrect assumption that all VMAs in a VM will be on the inactive list at the point last reference to a context and VM is dropped. This is not true because i915_gem_object_retire__read will not put VMA on the inactive list until all activities on the object in question (in all VMs) have been retired. As a consequence, whether or not a context/VM will be destroyed with its VMAs still on the active list, can depend on completely unrelated activities using the same object from a different context or engine. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92638 Testcase: igt/gem_request_retire/retire-vma-not-inactive Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448025816-25584-1-git-send-email-tvrtko.ursulin@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 18 11月, 2015 1 次提交
-
-
由 Ville Syrjälä 提交于
When register type safety happens, we can't just try to emit the register itself to the ring. Instead we'll need to extract the offset from it first. Add some convenience functions that will do that. v2: Convert MOCS setup too Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446672017-24497-20-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
- 19 10月, 2015 1 次提交
-
-
由 Chris Wilson 提交于
Since the beginning we have conflated the size of the global GTT with that of the per-process context sizes. In recent times (gen8+), those are no longer the same where the global GTT is limited to 2/4GiB but the per-process GTT may be anything up to 256TiB. Userspace knows nothing of this discrepancy and outside of one or two hacks, uses the getaperture ioctl to determine the maximum size it can use. Let's leave that as reporting the global GTT and use the context reporting method to describe the per-process value (which naturally fallsback to reporting the aliasing or global on older platforms, so userspace can always use this method where available). Testcase: igt/gem_userptr_blits/minor-normal-sync Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90065Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 09 10月, 2015 1 次提交
-
-
由 Tvrtko Ursulin 提交于
commit e9f24d5f Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Mon Oct 5 13:26:36 2015 +0100 drm/i915: Clean up associated VMAs on context destruction Introduced a wrong assumption that all contexts have a ppgtt instance. This is not true when full PPGTT is not active so remove the WARN_ON_ONCE from the context cleanup code. Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: NMichel Thierry <michel.thierry@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 10月, 2015 1 次提交
-
-
由 Tvrtko Ursulin 提交于
Prevent leaking VMAs and PPGTT VMs when objects are imported via flink. Scenario is that any VMAs created by the importer will be left dangling after the importer exits, or destroys the PPGTT context with which they are associated. This is caused by object destruction not running when the importer closes the buffer object handle due the reference held by the exporter. This also leaks the VM since the VMA has a reference on it. In practice these leaks can be observed by stopping and starting the X server on a kernel with fbcon compiled in. Every time X server exits another VMA will be leaked against the fbcon's frame buffer object. Also on systems where flink buffer sharing is used extensively, like Android, this leak has even more serious consequences. This version is takes a general approach from the earlier work by Rafael Barbalho (drm/i915: Clean-up PPGTT on context destruction) and tries to incorporate the subsequent discussion between Chris Wilson and Daniel Vetter. v2: Removed immediate cleanup on object retire - it was causing a recursive VMA unbind via i915_gem_object_wait_rendering. And it is in fact not even needed since by definition context cleanup worker runs only after the last context reference has been dropped, hence all VMAs against the VM belonging to the context are already on the inactive list. v3: Previous version could deadlock since VMA unbind waits on any rendering on an object to complete. Objects can be busy in a different VM which would mean that the cleanup loop would do the wait with the struct mutex held. This is an even simpler approach where we just unbind VMAs without waiting since we know all VMAs belonging to this VM are idle, and there is nothing in flight, at the point context destructor runs. v4: Double underscore prefix for __915_vma_unbind_no_wait and a commit message typo fix. (Michel Thierry) Note that this is just a partial/interim fix since we have a bit a fundamental issue with cleaning up, e.g. https://bugs.freedesktop.org/show_bug.cgi?id=87729Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Testcase: igt/gem_ppgtt.c/flink-and-exit-vma-leak Reviewed-by: NMichel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rafael Barbalho <rafael.barbalho@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> [danvet: Add a note that this isn't everything.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 02 9月, 2015 1 次提交
-
-
由 Zhiyuan Lv 提交于
Broadwell hardware supports both ring buffer mode and execlist mode. When i915 runs inside a VM with Intel GVT-g, we allow execlist mode only. The main reason of EXECLIST only is that GVT-g does not support the dynamic mode switch between ring buffer mode and execlist mode when running multiple virtual machines. v2: - Adjust the position of vgpu check in sanitize function (Joonas) - Add vgpu error check in context initialization. (Joonas, Daniel) Signed-off-by: NZhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by: NZhi Wang <zhi.a.wang@intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 14 8月, 2015 1 次提交
-
-
由 Chris Wilson 提交于
If we encounter an allocation failure during ppggt creation (trivial even with 16Gib+ RAM!), we need to remove the dead context from the fpriv->context_idr along with the references. gem_exec_ctx: page allocation failure: order:0, mode:0x8004 CPU: 3 PID: 27272 Comm: gem_exec_ctx Tainted: G W 4.2.0-rc5+ #37 0000000000000000 ffff880086ff7a78 ffffffff816b947a ffff88041ed90038 0000000000008004 ffff880086ff7b08 ffffffff8114b1a5 ffff880086ff7ac8 ffffffff8108d848 0000000000000000 ffffffff81ce84b8 0000000000000000 Call Trace: [<ffffffff816b947a>] dump_stack+0x45/0x57 [<ffffffff8114b1a5>] warn_alloc_failed+0xd5/0x120 [<ffffffff8108d848>] ? __wake_up+0x48/0x60 [<ffffffff8114e0ed>] __alloc_pages_nodemask+0x73d/0x8e0 [<ffffffffc0472238>] ? i915_gem_execbuffer2+0x148/0x240 [i915] [<ffffffffc0474240>] __setup_page_dma+0x30/0x110 [i915] [<ffffffffc0477f61>] gen8_ppgtt_init+0x31/0x2f0 [i915] [<ffffffffc04785e0>] i915_ppgtt_init+0x30/0x80 [i915] [<ffffffffc0478928>] i915_ppgtt_create+0x48/0xc0 [i915] [<ffffffffc046c9c2>] i915_gem_create_context+0x1c2/0x390 [i915] [<ffffffffc046d9cb>] i915_gem_context_create_ioctl+0x5b/0xa0 [i915] leading to an oops in i915_gem_context_close. Also note that this benchmark should not be running out of memory in the first place... Testcase: igt/benchmark/gem_exec_ctx -b create # ppgtt >= 2 Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 14 7月, 2015 1 次提交
-
-
由 Chris Wilson 提交于
[ 1572.417121] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1572.421010] IP: [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915] [ 1572.424970] PGD 1766a3067 PUD 1767a2067 PMD 0 [ 1572.428892] Oops: 0000 [#1] SMP [ 1572.432787] Modules linked in: ipv6 dm_mod iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore serio_raw pcspkr lpc_ich i2c_i801 mfd_core battery ac acpi_cpufreq i915 button video drm_kms_helper drm [ 1572.441720] CPU: 2 PID: 18853 Comm: kworker/u8:0 Not tainted 4.0.0_kcloud_3f0360_20150429+ #588 [ 1572.446298] Workqueue: i915 i915_gem_retire_work_handler [i915] [ 1572.450876] task: ffff880002f428f0 ti: ffff880035724000 task.ti: ffff880035724000 [ 1572.455557] RIP: 0010:[<ffffffffa00b2514>] [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915] [ 1572.460423] RSP: 0018:ffff880035727ce8 EFLAGS: 00010286 [ 1572.465262] RAX: ffff880073f1643c RBX: ffff880002da9058 RCX: ffff880073e5db40 [ 1572.470179] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880035727ce8 [ 1572.475107] RBP: ffff88007bb11a00 R08: 0000000000000000 R09: 0000000000000000 [ 1572.480034] R10: 0000000000362200 R11: 0000000000000008 R12: 0000000000000000 [ 1572.484952] R13: ffff880035727d78 R14: ffff880002dc1c98 R15: ffff880002dc1dc8 [ 1572.489886] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000 [ 1572.494883] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1572.499859] CR2: 0000000000000000 CR3: 000000017572a000 CR4: 00000000001006e0 [ 1572.504842] Stack: [ 1572.509834] ffff88017b0090c0 ffff880073f16438 ffff880002da9058 ffff880073f1643c [ 1572.514904] 0000000000000246 ffff880100000000 ffff88007bb11a00 ffff880002ddeb10 [ 1572.519985] ffff8801759f79c0 ffffffffa0092ff0 0000000000000000 ffff88007bb11a00 [ 1572.525049] Call Trace: [ 1572.530093] [<ffffffffa0092ff0>] ? i915_gem_context_free+0xa8/0xc1 [i915] [ 1572.535227] [<ffffffffa009b969>] ? i915_gem_request_free+0x4e/0x50 [i915] [ 1572.540347] [<ffffffffa00b5533>] ? intel_execlists_retire_requests+0x14c/0x159 [i915] [ 1572.545500] [<ffffffffa009d9ea>] ? i915_gem_retire_requests+0x9d/0xeb [i915] [ 1572.550664] [<ffffffffa009dd8c>] ? i915_gem_retire_work_handler+0x4c/0x61 [i915] [ 1572.555825] [<ffffffff8104ca7f>] ? process_one_work+0x1b2/0x31d [ 1572.560951] [<ffffffff8104d278>] ? worker_thread+0x24d/0x339 [ 1572.566033] [<ffffffff8104d02b>] ? cancel_delayed_work_sync+0xa/0xa [ 1572.571140] [<ffffffff81050b25>] ? kthread+0xce/0xd6 [ 1572.576191] [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162 [ 1572.581228] [<ffffffff8179b3c8>] ? ret_from_fork+0x58/0x90 [ 1572.586259] [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162 [ 1572.591318] Code: de 48 89 e7 e8 09 4d 00 e1 48 85 c0 74 27 48 89 68 10 48 8b 55 38 48 89 e7 48 89 50 18 48 8b 55 10 48 8b 12 48 8b 12 48 8b 52 38 <8b> 12 89 50 08 e8 95 4d 00 e1 48 83 c4 30 5b 5d 41 5c c3 41 55 [ 1572.596981] RIP [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915] [ 1572.602464] RSP <ffff880035727ce8> [ 1572.607911] CR2: 0000000000000000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90112#c23Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 09 7月, 2015 1 次提交
-
-
由 Ville Syrjälä 提交于
Stolen gets trashed during hibernation, so storing contexts there is not a very good idea. On my IVB machines this leads to a totally dead GPU on resume. A reboot is required to resurrect it. So let's not store contexts where they will get trampled. This reverts commit 149c86e7. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 06 7月, 2015 1 次提交
-
-
由 Abdiel Janulgue 提交于
Also clarify comments on context size that the extra state for Resource Streamer is included. v2: Don't remove the extended save/restore enabled for older platforms. (Ville) Use new MI_SET_CONTEXT defines for HSW RS save/restore state instead of extended save/restore. (Daniel) Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NAbdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 23 6月, 2015 11 次提交
-
-
由 John Harrison 提交于
Now that everything above has been converted to use requests, intel_ring_begin() can be updated to take a request instead of a ring. This also means that it no longer needs to lazily allocate a request if no-one happens to have done it earlier. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Updated the various ring->flush() functions to take a request instead of a ring. Also updated the tracer to include the request id. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> [danvet: Rebase since I didn't merge the addition of req->uniq.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Updated the switch_mm() code paths to take a request instead of a ring. This includes the myriad *_mm_switch functions themselves and a bunch of PDP related helper functions. v2: Rebased to newer tree. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Updated mi_set_context() to take a request structure instead of a ring and context pair. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Converted i915_gem_l3_remap() to take a request structure instead of a ring. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Now that everything above has been converted to use request structures, it is possible to update the lower level move_to_active() functions to be request based as well. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Now that everything above has been converted to use requests, it is possible to update init_context() to take a request pointer instead of a ring/context pair. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Updated do_switch() to take a request pointer instead of a ring/context pair. v2: Removed some overzealous req-> dereferencing. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
Now that the request is guaranteed to specify the context, it is possible to update the context switch code to use requests rather than ring and context pairs. This patch updates i915_switch_context() accordingly. Also removed the warning that the request's context must match the last context switch's context. As the context switch now gets the context object from the request structure, there is no longer any scope for the two to become out of step. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
The final step in removing the OLR from i915_gem_init_hw() is to pass the newly allocated request structure in to each step rather than passing a ring structure. This patch updates both i915_ppgtt_init_ring() and i915_gem_context_enable() to take request pointers. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 John Harrison 提交于
The start of day context initialisation code in i915_gem_context_enable() loops over each ring and calls the legacy switch context or the execlist init context code as appropriate. This patch moves the ring looping out of that function in to the top level caller i915_gem_init_hw(). This means the a single pass can be made over all rings doing the PPGTT, L3 remap and context initialisation of each ring altogether. For: VIZ-5115 Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> Reviewed-by: NTomas Elf <tomas.elf@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 29 5月, 2015 1 次提交
-
-
由 David Weinehall 提交于
Export a new context parameter that can be set/queried through the context_{get,set}param ioctls. This parameter is passed as a context flag and decides whether or not a GPU address mapping is allowed to be made at address zero. The default is to allow such mappings. Signed-off-by: NDavid Weinehall <david.weinehall@intel.com> Acked-by: N"Zou, Nanhai" <nanhai.zou@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 21 5月, 2015 1 次提交
-
-
由 Chris Wilson 提交于
Currently, we only track the last request globally across all engines. This prevents us from issuing concurrent read requests on e.g. the RCS and BCS engines (or more likely the render and media engines). Without semaphores, we incur costly stalls as we synchronise between rings - greatly impacting the current performance of Broadwell versus Haswell in certain workloads (like video decode). With the introduction of reference counted requests, it is much easier to track the last request per ring, as well as the last global write request so that we can optimise inter-engine read read requests (as well as better optimise certain CPU waits). v2: Fix inverted readonly condition for nonblocking waits. v3: Handle non-continguous engine array after waits v4: Rebase, tidy, rewrite ring list debugging v5: Use obj->active as a bitfield, it looks cool v6: Micro-optimise, mostly involving moving code around v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf) v8: Rebase v9: Refactor i915_gem_object_sync() to allow the compiler to better optimise it. Benchmark: igt/gem_read_read_speed hsw:gt3e (with semaphores): Before: Time to read-read 1024k: 275.794µs After: Time to read-read 1024k: 123.260µs hsw:gt3e (w/o semaphores): Before: Time to read-read 1024k: 230.433µs After: Time to read-read 1024k: 124.593µs bdw-u (w/o semaphores): Before After Time to read-read 1x1: 26.274µs 10.350µs Time to read-read 128x128: 40.097µs 21.366µs Time to read-read 256x256: 77.087µs 42.608µs Time to read-read 512x512: 281.999µs 181.155µs Time to read-read 1024x1024: 1196.141µs 1118.223µs Time to read-read 2048x2048: 5639.072µs 5225.837µs Time to read-read 4096x4096: 22401.662µs 21137.067µs Time to read-read 8192x8192: 89617.735µs 85637.681µs Testcase: igt/gem_concurrent_blit (read-read and friends) Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8] [danvet: s/\<rq\>/req/g] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 24 4月, 2015 2 次提交
-
-
由 Daniel Vetter 提交于
It's already protected by the bkl^Wdev->struct_mutex. While at it realign some related code. Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
由 Daniel Vetter 提交于
We load the ppgtt ptes once per gpu reset/driver load/resume and that's all that's needed. Note that this only blows up when we're using the allocate_va_range funcs and not the special-purpose ones used. With this change we can get rid of that duplication. Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 21 4月, 2015 1 次提交
-
-
由 Daniel Vetter 提交于
Since commit bf3d149b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Feb 14 14:01:12 2014 +0100 drm/i915: split PIN_GLOBAL out from PIN_MAPPABLE i915_gem_obj_ggtt_pin always binds into the ggtt, but I've forgotten to remove the now redundant additional bind call later on. Fix this up. Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-