- 28 12月, 2016 1 次提交
-
-
由 John Brooks 提交于
The 80211.tmpl DocBook file was removed in commit 819bf593 ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: NJohn Brooks <john@fastquake.com> Mea-culpa-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
- 21 12月, 2016 3 次提交
-
-
由 Dongpo Li 提交于
The SoC hix5hd2 compatible string has the suffix "-gmac" and we should not change its compatible string. So we should name all the compatible string with the suffix "-gmac". Creating a new name suffix "-gemac" is unnecessary. We also add another SoC compatible string in dt binding documentation and describe which generic version the SoC belongs to. Fixes: d0fb6ba7 ("net: hix5hd2_gmac: add generic compatible string") Signed-off-by: NDongpo Li <lidongpo@hisilicon.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 jbrunet 提交于
The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mimi Zohar 提交于
The IMA binary_runtime_measurements list is currently in platform native format. To allow restoring a measurement list carried across kexec with a different endianness than the targeted kernel, this patch defines little-endian as the canonical format. For big endian systems wanting to save/restore the measurement list from a system with a different endianness, a new boot command line parameter named "ima_canonical_fmt" is defined. Considerations: use of the "ima_canonical_fmt" boot command line option will break existing userspace applications on big endian systems expecting the binary_runtime_measurements list to be in platform native format. Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: NDmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 12月, 2016 2 次提交
-
-
由 Masahiro Yamada 提交于
Add a Socionext SoC specific compatible (suggested by Rob Herring). No SoC specific data are associated with the compatible strings for now, but other SoC vendors may use this IP and want to differentiate IP variants in the future. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Borislav Petkov 提交于
It means different things on Intel and AMD so write it down so that there's no confusion. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20161117094557.jm6hwzdd52h7iwnj@pd.tnicSigned-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 19 12月, 2016 3 次提交
-
-
由 Vladimir Kondratiev 提交于
Signed-off-by: NVladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Akinobu Mita 提交于
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel interface compatible with SRAM. This driver supports basic clock, calendar and alarm functionality. Tested with Microblaze linux running on Artix7 FPGA board with my own custom IP for RTC-7301. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Dmitry Shachnev 提交于
In docutils 0.13, the return type of get_column_widths method of the Table directive has changed [1], which breaks our flat-table directive and leads to a TypeError when trying to build the docs [2]. This patch adds support for the new return type, while keeping support for older docutils versions too. [1] https://sourceforge.net/p/docutils/patches/120/ [2] https://sourceforge.net/p/docutils/bugs/303/Signed-off-by: NDmitry Shachnev <mitya57@debian.org> Cc: <stable@vger.kernel.org> # 4.8.x- Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
- 17 12月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
Introduce a new mutex to avoid an AB-BA deadlock between kvm->lock and vcpu->mutex. Protect accesses in kvm_hv_setup_tsc_page too, as suggested by Roman. Reported-by: NDmitry Vyukov <dvyukov@google.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 16 12月, 2016 7 次提交
-
-
由 Amir Goldstein 提交于
- Fix broken long line block quote - Fix missing newline before bullets list - Use correct numbered list syntax Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Miklos Szeredi 提交于
The quirk for file locks and leases no longer applies. Add missing info about renaming directory residing on lower layer. Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
-
由 Guy Shapiro 提交于
Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by: NGuy Shapiro <guy.shapiro@mobi-wize.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Michael S. Tsirkin 提交于
It's no longer used. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Michael S. Tsirkin 提交于
We dropped __CHECK_ENDIAN__ so __bitwise__ is now an implementation detail. People should use __bitwise everywhere. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Max Filippov 提交于
xtensa supports DMA API debug and contiguous DMA, mark it as such. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 15 12月, 2016 13 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Instead of storing the concepts dictionary inside header file, move it to the subsystem documentation. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Some kernel-doc tags don't provide good descriptions or use a different style. Adjust them. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Update MAINTAINERS to reflect the location of edac.rst and ras.rst. In the case of 00-INDEX, there's already an entry to the admin-guide, so all we need to do is to remove the entry there. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Currently, there's no device driver documentation for the EDAC subsystem at the driver-api book. Fill in the blanks for the structures and functions that misses documentation, uniform the word on the existing ones, and add a new edac.rst file at driver-api, in order to document the EDAC subsystem. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
EDAC is part of the Kernel's RAS facilities, with is useful for system admins to detect errors. So, add it to the admin's guide. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The edac.txt assumes that the reader has already deep knowledge on RAS features. However, this may not be the case. So, add an introduction chapter explaining the main concepts that are used by the EDAC subsystem and by other RAS drivers within the Kernel. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
There's a chapter at edac.rst written by the time Nehalem support was added. Such information is used not only by the Nehalem driver (i7core_edac), but by all newer Intel CPU architectures that are supported by i7core_edac, sb_edac and sbx_edac drivers. Update the information to reflect that. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This driver has been there for almost 3 years, without any conceptual changes. So, it is not experimental anymore, and won't likely have any changes at the API or on log outputs. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Converts the EDAC driver subsystem documentation to ReST: - Put paragraph titles in lower case; - Add code blocks where needed; - Convert tables to ReST markup; - Mark filesystem and module names as verbatim; - Adjust document to be properly displayed in html. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Documentation for those are missing at the EDAC description. I guess we end by moving such descriptions in the past to the ABI document (or only added it there), but it means that the EDAC documentation is incomplete. So, add it there. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Christoph Hellwig 提交于
Logfs was introduced to the kernel in 2009, and hasn't seen any non drive-by changes since 2012, while having lots of unsolved issues including the complete lack of error handling, with more and more issues popping up without any fixes. The logfs.org domain has been bouncing from a mail, and the maintainer on the non-logfs.org domain hasn't repsonded to past queries either. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Jaegeuk Kim reports that the debian kernel package build gets confused by the lack of Documentation/Changes file. We also refer to that path name in ver_linux and various how-to files and Kconfig files. The file got renamed away in commit 186128f7 ("docs-rst: add documents to development-process"), and as Jaegeuk Kim points out, the commit message for that change says "use symlinks instead of renames", but then the commit itself actually does renames after all. Maybe we should do the other files too, but for now this just adds the minimal symlink back to the historical name, so that people looking for Documentation/Changes will actually find what they are looking for, and the debian scripts continue to work. Reported-by: NJaegeuk Kim <jaegeuk@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Currently we have two different structures for passing fault information around - struct vm_fault and struct fault_env. DAX will need more information in struct vm_fault to handle its faults so the content of that structure would become event closer to fault_env. Furthermore it would need to generate struct fault_env to be able to call some of the generic functions. So at this point I don't think there's much use in keeping these two structures separate. Just embed into struct vm_fault all that is needed to use it for both purposes. Link: http://lkml.kernel.org/r/1479460644-25076-2-git-send-email-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 12月, 2016 9 次提交
-
-
由 Paul Bolle 提交于
The build system stopped generating ikconfig.h in v2.6.8. Remove an entry for it in dontdiff. There's also a reference to it in a small comment. Remove that comment too, as it is of little help in any case. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Michael Witten 提交于
According to `man blockdev': --getsize Print device size (32-bit!) in sectors. Deprecated in favor of the --getsz option. ... --getsz Get size in 512-byte sectors. Hence, occurrences of `--getsize' should be replaced with `--getsz', which this commit has achieved as follows: $ cd "$repo" $ git grep -l -e --getsz Documentation/device-mapper/delay.txt Documentation/device-mapper/dm-crypt.txt Documentation/device-mapper/linear.txt Documentation/device-mapper/log-writes.txt Documentation/device-mapper/striped.txt Documentation/device-mapper/switch.txt $ cd Documentation/device-mapper $ sed -i s/getsize/getsz/g * Signed-off-by: NMichael Witten <mfwitten@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Stephan Mueller 提交于
The :functions: definition allows the specification of multiple function references which prevents parsing the header file multiple times. Reported-by: NJani Nikula <jani.nikula@linux.intel.com> Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Stephan Mueller 提交于
Remove the documentation reference to crypto_alloc_ablkcipher as the API function call was removed. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Stephan Mueller 提交于
Add the KPP API documentation to the kernel crypto API Sphinx documentation. This addition includes the documentation of the ECDH and DH helpers which are needed to create the approrpiate input data for the crypto_kpp_set_secret function. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Stephan Mueller 提交于
Keep the cipher API and the request API function documentation in separate sections. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Stephan Mueller 提交于
With the conversion of the documentation to Sphinx, the old DocBook is now stale. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Stephan Mueller 提交于
With the conversion of the kernel crypto API DocBook to Sphinx, the monolithic document is broken up into individual documents. The documentation is unchanged with the exception of a slight reordering to keep the individual document parts self-contained. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Lyude 提交于
For whatever reason, the X1 Yoga doesn't support the normal method of querying for tablet mode. Instead of providing the MHKG method under the hotkey handle, we're instead given the CMMD method under the EC handle. Values on this handle are either 0x1, laptop mode, or 0x6, tablet mode. Tested-by: NDaniel Martin <consume.noise@gmail.com> Signed-off-by: NLyude <lyude@redhat.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 13 12月, 2016 1 次提交
-
-
由 Kees Cook 提交于
Similar to being able to examine if a process has been correctly confined with seccomp, the state of no_new_privs is equally interesting, so this adds it to /proc/$pid/status. Link: http://lkml.kernel.org/r/20161103214041.GA58566@beastSigned-off-by: NKees Cook <keescook@chromium.org> Reviewed-by: NJann Horn <jann@thejh.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rodrigo Freire <rfreire@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Robert Ho <robert.hu@intel.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-