- 10 8月, 2010 27 次提交
-
-
由 Al Viro 提交于
All call chains to clear_inode() pass through evict_inode() and clear_inode() should be called by evict_inode() exactly once. So we can pull i_bdev/i_cdev detaching up to evict_inode() itself. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
The first spoils - hugetlb can use default ->drop_inode() now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Hybrid of ->clear_inode() and ->delete_inode(); if present, does all fs work to be done when in-core inode is about to be gone, for whatever reason. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
For now, just a straightforward merge Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
add I_CLEAR instead of replacing I_FREEING with it. I_CLEAR is equivalent to I_FREEING for almost all code looking at either; it's there to keep track of having called clear_inode() exactly once per inode lifetime, at some point after having set I_FREEING. I_CLEAR and I_FREEING never get set at the same time with the current code, so we can switch to setting i_flags to I_FREEING | I_CLEAR instead of I_CLEAR without loss of information. As the result of such change, checks become simpler and the amount of code that needs to know about I_CLEAR shrinks a lot. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Copy and simplify in the only two users remaining. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Convert XFS to the new truncate sequence. We still can have errors after updating the file size in xfs_setattr, but these are real I/O errors and lead to a transaction abort and filesystem shutdown, so they are not an issue. Errors from ->write_begin and write_end can now be handled correctly because we can actually get rid of the delalloc extents while previous the buffer state was stipped in block_invalidatepage. There is still no error handling for ->direct_IO, because doing so will need some major restructuring given that we only have the iolock shared and do not hold i_mutex at all. Fortunately leaving the normally allocated blocks behind there is not a major issue and this will get cleaned up by xfs_free_eofblock later. Note: the patch is against Al's vfs.git tree as that contains the nessecary preparations. I'd prefer to get it applied there so that we can get some testing in linux-next. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Boaz Harrosh 提交于
These changes are crafted based on the similar conversion done to ext2 by Nick Piggin. * Remove the deprecated ->truncate vector. Let exofs_setattr take care of on-disk size updates. * Call truncate_pagecache on the unused pages if write_begin/end fails. * Cleanup exofs_delete_inode that did stupid inode writes and updates on an inode that will be removed. * And finally get rid of exofs_get_block. We never had any blocks it was all for calling nobh_truncate_page. nobh_truncate_page is not actually needed in exofs since the last page is complete and gone, just like all the other pages. There is no partial blocks in exofs. I've tested with this patch, and there are no apparent failures, so far. CC: Nick Piggin <npiggin@suse.de> CC: Christoph Hellwig <hch@lst.de> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Make sure we check the truncate constraints early on in ->setattr by adding those checks to inode_change_ok. Also clean up and document inode_change_ok to make this obvious. As a fallout we don't have to call inode_newsize_ok from simple_setsize and simplify it down to a truncate_setsize which doesn't return an error. This simplifies a lot of setattr implementations and means we use truncate_setsize almost everywhere. Get rid of fat_setsize now that it's trivial and mark ext2_setsize static to make the calling convention obvious. Keep the inode_newsize_ok in vmtruncate for now as all callers need an audit for its removal anyway. Note: setattr code in ecryptfs doesn't call inode_change_ok at all and needs a deeper audit, but that is left for later. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Make sure we call inode_change_ok before doing any changes in ->setattr, and make sure to call it even if our fs wants to ignore normal UNIX permissions, but use the ATTR_FORCE to skip those. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Replace inode_setattr with opencoded variants of it in all callers. This moves the remaining call to vmtruncate into the filesystem methods where it can be replaced with the proper truncate sequence. In a few cases it was obvious that we would never end up calling vmtruncate so it was left out in the opencoded variant: spufs: explicitly checks for ATTR_SIZE earlier btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above In addition to that ncpfs called inode_setattr with handcrafted iattrs, which allowed to trim down the opencoded variant. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
With the new truncate sequence every filesystem that wants to support file size changes on disk needs to implement its own ->setattr. So instead of calling inode_setattr which supports size changes call into a simple method that doesn't support this. simple_setattr is almost what we want except that it does not mark the inode dirty after changes. Given that marking the inode dirty is a no-op for the simple in-memory filesystems that use simple_setattr currently just add the mark_inode_dirty call. Also add a WARN_ON for the presence of a truncate method to simple_setattr to catch new instances of it during the transition period. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Despite its name it's now a generic implementation of ->setattr, but rather a helper to copy attributes from a struct iattr to the inode. Rename it to setattr_copy to reflect this fact. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
For the new truncate sequence every filesystem that wants to truncate on-disk state needs a seattr method. Convert the remaining filesystems that implement the truncate inode operation to have its own setattr method. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in preparation of the new truncate sequence and rename the non-truncating version to block_write_begin. While we're at it also remove several unused arguments to block_write_begin. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Split up the block_write_begin implementation - __block_write_begin is a new trivial wrapper for block_prepare_write that always takes an already allocated page and can be either called from block_write_begin or filesystem code that already has a page allocated. Remove the handling of already allocated pages from block_write_begin after switching all callers that do it to __block_write_begin. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
For filesystem that implement directories in pagecache we call block_write_begin with an already allocated page for this code, while the normal regular file write path uses the default block_write_begin behaviour. Get rid of the __foofs_write_begin helper and opencode the normal write_begin call in foofs_write_begin, while adding a new foofs_prepare_chunk helper for the directory code. The added benefit is that foofs_prepare_chunk has a much saner calling convention. Note that the interruptible flag passed into block_write_begin is always ignored if we already pass in a page (see next patch for details), and we never were doing truncations of exessive blocks for this case either so we can switch directly to block_write_begin_newtrunc. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in preparation of the new truncate sequence and rename the non-truncating version to cont_write_begin. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the only remaining caller and rename the non-truncating version to nobh_write_begin. Get rid of the superflous file argument to it while we're at it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
if kmalloc fails, we still need to drop the inode, as we do on other failure exits. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
a) count file openers correctly; i_count use was completely wrong b) use new mutex for exclusion between final close/open/truncate, to protect tailpacking logics. i_mutex use was wrong and resulted in deadlocks. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 8月, 2010 4 次提交
-
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits) xfs simplify and speed up direct I/O completions xfs: move aio completion after unwritten extent conversion direct-io: move aio_complete into ->end_io xfs: fix big endian build xfs: clean up xfs_bmap_get_bp xfs: simplify xfs_truncate_file xfs: kill the b_strat callback in xfs_buf xfs: remove obsolete osyncisosync mount option xfs: clean up filestreams helpers xfs: fix gcc 4.6 set but not read and unused statement warnings xfs: Fix build when CONFIG_XFS_POSIX_ACL=n xfs: fix unsigned underflow in xfs_free_eofblocks xfs: use GFP_NOFS for page cache allocation xfs: fix memory reclaim recursion deadlock on locked inode buffer xfs: fix xfs_trans_add_item() lockdep warnings xfs: simplify and remove xfs_ireclaim xfs: don't block on buffer read errors xfs: move inode shrinker unregister even earlier xfs: remove a dmapi leftover xfs: writepage always has buffers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits) cifs: fsc should not default to "on" [CIFS] remove redundant path walking in dfs_do_refmount cifs: ignore the "mand", "nomand" and "_netdev" mount options cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS cifs: don't allow cifs_iget to match inodes of the wrong type [CIFS] relinquish fscache cookie before freeing CIFSTconInfo cifs: add separate cred_uid field to sesInfo fs: cifs: check kmalloc() result [CIFS] Missing ifdef [CIFS] Missing line from previous commit [CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled cifs: add mount option to enable local caching cifs: read pages from FS-Cache cifs: store pages into local cache cifs: FS-Cache page management cifs: define inode-level cache object and register them cifs: define superblock-level cache index objects and register them cifs: remove unused cifsUidInfo struct cifs: clean up cifs_find_smb_ses (try #2) cifs: match secType when searching for existing tcp session ...
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
-
由 Helge Deller 提交于
avoid potential stack overflow by correctly checking count parameter Reported-by: NIlja <ilja@netric.org> Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 8月, 2010 9 次提交
-
-
由 Alex Elder 提交于
-
由 Jeff Layton 提交于
I'm not sure why this was merged with this flag hardcoded on, but it seems quite dangerous. Turn it off. Also, mount.cifs hands unrecognized options off to the kernel so there should be no need for changes there in order to support this. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Reviewed-by: NDave Howells <dhowells@redhat.com> Signed-off-by: NIgor Mammedov <niallain@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
These are all handled by the userspace mount programs, but older versions of mount.cifs also handed them off to the kernel. Ignore them. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Seems like a more sensible mapping than -EIO. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
If the type is different from what we think it should be, then don't match the existing inode. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Doh, fix a use after free bug. Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de> Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Right now, there's no clear separation between the uid that owns the credentials used to do the mount and the overriding owner of the files on that mount. Add a separate cred_uid field that is set to the real uid of the mount user. Unlike the linux_uid, the uid= option does not override this parameter. The parm is sent to cifs.upcall, which can then preferentially use the creduid= parm instead of the uid= parm for finding credentials. This is not the only way to solve this. We could try to do all of this in kernel instead by having a module parameter that affects what gets passed in the uid= field of the upcall. That said, we have a lot more flexibility to change things in userspace so I think it probably makes sense to do it this way. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Kulikov Vasiliy 提交于
If kmalloc() fails exit with -ENOMEM. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Acked-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-