Values are available via ZVC sums.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the last vestiges of the long-deprecated "MAP_ANON" page protection
flag: use "MAP_ANONYMOUS" instead.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remap() the region we get from mmap() to mark the fact that we are
using all of the available slack space. Any slack space is used
to form a simple brk region, and potentially more stack space than
requested at load time.

Any searches of the vma chain may well fail looking for
stack (and especially arg) addresses if the remaping is not done.
The simplest example is /proc/<pid>/cmdline, since the args
are pretty much always at the top of the data/bss/stack region.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a double free of "dfid" introduced by commit
da977b2c and spotted by the Coverity
checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__unmap_hugepage_range() is buggy that it does not preserve dirty state of
huge_pte when unmapping hugepage range.  It causes data corruption in the
event of dop_caches being used by sys admin.  For example, an application
creates a hugetlb file, modify pages, then unmap it.  While leaving the
hugetlb file alive, comes along sys admin doing a "echo 3 >
/proc/sys/vm/drop_caches".

drop_pagecache_sb() will happily free all pages that aren't marked dirty if
there are no active mapping.  Later when application remaps the hugetlb
file back and all data are gone, triggering catastrophic flip over on
application.

Not only that, the internal resv_huge_pages count will also get all messed
up.  Fix it up by marking page dirty appropriately.
Signed-off-by: NKen Chen <kenchen@google.com>
Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a fix of regression, which triggered by ~2.6.16.

Patch with name ufs-directory-and-page-cache-from-blocks-to-pages.patch: in
additional to conversation from block to page cache mechanism added new
checks of directory integrity, one of them that directory entry do not
across directory chunks.

But some kinds of UFS: OpenStep UFS and Apple UFS (looks like these are the
same filesystems) have different directory chunk size, then common
UFSes(BSD and Solaris UFS).

So this patch adds ability to works with variable size of directory chunks,
and set it for ufstype=openstep to right size.

Tested on darwin ufs.
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Attributes in configfs are text files.  As such, most handlers expect to be
able to call functions like simple_strtoul() without checking the bounds
of the buffer.  Change the call to zero terminate the buffer before calling
the client's ->store() method.  This does reduce the attribute size from
PAGE_SIZE to PAGE_SIZE-1.

Also, change get_zeroed_page() to alloc_page(), as we are handling the
termination.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

As was already pointed out Mathieu Avila on Thu, 07 Sep 2006 03:15:25 -0700
that OCFS2 is expecting bio_add_page() to add pages to BIOs in an easily
predictable manner.

That is not true, especially for devices with own merge_bvec_fn().

Therefore OCFS2's heartbeat code is very likely to fail on such devices.

Move the bio_put() call into the bio's bi_end_io() function. This makes the
whole idea of trying to predict the behaviour of bio_add_page() unnecessary.
Removed compute_max_sectors() and o2hb_compute_request_limits().
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

When there is a lot of multithreaded I/O usage, two threads can collide
while sending out a message to the other nodes. This is due to the lack of
locking between threads while sending out the messages.

When a connected TCP send(), sendto(), or sendmsg() arrives in the Linux
kernel, it eventually comes through tcp_sendmsg(). tcp_sendmsg() protects
itself by acquiring a lock at invocation by calling lock_sock().
tcp_sendmsg() then loops over the buffers in the iovec, allocating
associated sk_buff's and cache pages for use in the actual send. As it does
so, it pushes the data out to tcp for actual transmission. However, if one
of those allocation fails (because a large number of large sends is being
processed, for example), it must wait for memory to become available. It
does so by jumping to wait_for_sndbuf or wait_for_memory, both of which
eventually cause a call to sk_stream_wait_memory(). sk_stream_wait_memory()
contains a code path that calls sk_wait_event(). Finally, sk_wait_event()
contains the call to release_sock().

The following patch adds a lock to the socket container in order to
properly serialize outbound requests.

From: Zhen Wei <zwei@novell.com>
Acked-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

OCFS2: drop 'depends on INET' since local mounts are now allowed.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Currently the ocfs2 dlm has no timeout during dlm join domain. While this is
not a problem in normal operation, this does become an issue if, say, the
other node is refusing to let the node join the domain because of a stuck
recovery. This patch adds a 90 sec timeout.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

These messages can easily be activated using the mlog infrastructure
and don't need to be enabled by default.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

There is a small window where a joining node may not see the node(s) that
just died but are still part of the domain. To fix this, we must disallow
join requests if the joining node has a different node map.

A new field node_map is added to dlm_query_join_request to send the current
nodes nodemap along with join request. On the receiving end the nodes that
are part of the cluster verifies if this new node sees all the nodes that
are still part of the cluster. They disallow the join if the maps mismatch.
Signed-off-by: NSrinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Eventhough the set refmap bit message is sent before the clear refmap
message, currently there is no guarentee that the set message will be
handled before the clear. This patch prevents the clear refmap to be
processed while the node is sending assert master messages to other
nodes. (The set refmap message is sent as a response to the assert
master request).
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch binds the o2net listener to the configured ip address
instead of INADDR_ANY for security. Fixes oss.oracle.com bugzilla#814.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch prevents the dlm from sending the clear refmap message
before the set refmap. We use the newly created post function handler
routine to accomplish the task.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Currently o2net allows one handler function per message type. This
patch adds the ability to call another function to be called after
the handler has returned the message to the other node.

Handlers are now given the option of returning a context (in the form of a
void **) which will be passed back into the post message handler function.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The dlm encodes the node number and a sequence number in the lock cookie.
It also stores the cookie in the lockres in the big endian format to avoid
swapping 8 bytes on each lock request. The bug here was that it was assuming
the cookie to be in the cpu format when decoding it for printing the error
message. This patch swaps the bytes before the print.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

When the lockres is in migrate or recovery state, all convert requests
are denied with the appropriate error status that is handled on the
requester node. This patch silences the erroneous error message printed
on the master node.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The dlm was not waking up threads waiting on the lockres wait queue,
waiting for the lockres to be no longer be in the DLM_LOCK_RES_IN_PROGRESS
and the DLM_LOCK_RES_MIGRATING states.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

dlm_dispatch_work was not processing the queued up tasks at
the first sign of the node leaving the domain leading to not
only incompleted tasks but also a mismatch in the dlm refcnt.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This is to prevent the condition in which a previously queued
up assert master asserts after we start the migration. Now
migration ensures the workqueue is flushed before proceeding
with migrating the lock to another node. This condition is
typically encountered during parallel umounts.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The migrate lockres handler was only searching for its lock on
migrated lockres on the expected queue. This could be problematic
as the new master could have also issued a convert request
during the migration and thus moved the lock to the convert queue.
We now search for the lock on all three queues.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

dlmunlock() was not waiting for migration to complete before releasing locks
on locally mastered locks.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

dlmthread was removing lockres' from the dirty list
and resetting the dirty flag before shuffling the list.
This patch retains the dirty state flag until the lists
are shuffled.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NSunil Mushran <Sunil.Mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This patch makes some needlessly global functions static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This was previously broken and migration of some locks had to be temporarily
disabled. We use a new (and backward-incompatible) set of network messages
to account for all references to a lock resources held across the cluster.
once these are all freed, the master node may then free the lock resource
memory once its local references are dropped.
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The problem.  When implementing a network namespace I need to be able
to have multiple network devices with the same name.  Currently this
is a problem for /sys/class/net/*. 

What I want is a separate /sys/class/net directory in sysfs for each
network namespace, and I want to name each of them /sys/class/net.

I looked and the VFS actually allows that.  All that is needed is
for /sys/class/net to implement a follow link method to redirect
lookups to the real directory you want. 

Implementing a follow link method that is sensitive to the current
network namespace turns out to be 3 lines of code so it looks like a
clean approach.  Modifying sysfs so it doesn't get in my was is a bit
trickier. 

I am calling the concept of multiple directories all at the same path
in the filesystem shadow directories.  With the directory entry really
at that location the shadow master. 

The following patch modifies sysfs so it can handle a directory
structure slightly different from the kobject tree so I can implement
the shadow directories for handling /sys/class/net/.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

if a driver returns an error in fill_read_buffer(), the buffer will be
marked as filled. Subsequent reads will return eof. But there is
no data because of an error, not because it has been read.
Not marking the buffer filled is the obvious fix.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes redundant argument checks for kobject_put().
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lockdep issues the following warning:
[    9.064000] =============================================
[    9.064000] [ INFO: possible recursive locking detected ]
[    9.064000] 2.6.20-rc3-mm1 #3
[    9.064000] ---------------------------------------------
[    9.064000] init/1 is trying to acquire lock:
[    9.064000]  (&sysfs_inode_imutex_key){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f
[    9.064000]
[    9.064000] but task is already holding lock:
[    9.064000]  (&sysfs_inode_imutex_key){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f
[    9.065000]
[    9.065000] other info that might help us debug this:
[    9.065000] 2 locks held by init/1:
[    9.065000]  #0:  (tty_mutex){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f
[    9.065000]  #1:  (&sysfs_inode_imutex_key){--..}, at: [<c03e6afc>] mutex_lock+0x1c/0x1f
[    9.065000]
[    9.065000] stack backtrace:
[    9.065000]  [<c010390d>] show_trace_log_lvl+0x1a/0x30
[    9.066000]  [<c0103935>] show_trace+0x12/0x14
[    9.066000]  [<c0103a2f>] dump_stack+0x16/0x18
[    9.066000]  [<c0138cb8>] print_deadlock_bug+0xb9/0xc3
[    9.066000]  [<c0138d17>] check_deadlock+0x55/0x5a
[    9.066000]  [<c013a953>] __lock_acquire+0x371/0xbf0
[    9.066000]  [<c013b7a9>] lock_acquire+0x69/0x83
[    9.066000]  [<c03e6b7e>] __mutex_lock_slowpath+0x75/0x2d1
[    9.066000]  [<c03e6afc>] mutex_lock+0x1c/0x1f
[    9.066000]  [<c01b249c>] sysfs_drop_dentry+0xb1/0x133
[    9.066000]  [<c01b25d1>] sysfs_hash_and_remove+0xb3/0x142
[    9.066000]  [<c01b30ed>] sysfs_remove_file+0xd/0x10
[    9.067000]  [<c02849e0>] device_remove_file+0x23/0x2e
[    9.067000]  [<c02850b2>] device_del+0x188/0x1e6
[    9.067000]  [<c028511b>] device_unregister+0xb/0x15
[    9.067000]  [<c0285318>] device_destroy+0x9c/0xa9
[    9.067000]  [<c0261431>] vcs_remove_sysfs+0x1c/0x3b
[    9.067000]  [<c0267a08>] con_close+0x5e/0x6b
[    9.067000]  [<c02598f2>] release_dev+0x4c4/0x6e5
[    9.067000]  [<c0259faa>] tty_release+0x12/0x1c
[    9.067000]  [<c0174872>] __fput+0x177/0x1a0
[    9.067000]  [<c01746f5>] fput+0x3b/0x41
[    9.068000]  [<c0172ee1>] filp_close+0x36/0x65
[    9.068000]  [<c0172f73>] sys_close+0x63/0xa4
[    9.068000]  [<c0102a96>] sysenter_past_esp+0x5f/0x99
[    9.068000]  =======================

This is due to sysfs_hash_and_remove() holding dir->d_inode->i_mutex
before calling sysfs_drop_dentry() which calls orphan_all_buffers()
which in turn takes node->i_mutex.
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch prevents a race between IO and removing a file from sysfs.
It introduces a list of sysfs_buffers associated with a file at the inode.
Upon removal of a file the list is walked and the buffers marked orphaned.
IO to orphaned buffers fails with -ENODEV. The driver can safely free
associated data structures or be unloaded.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Acked-by: NManeesh Soni <maneesh@in.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we allow NULL as the new parent in device_move(), we need to make sure
that the device is placed into the same place as it would if it was
newly registered:

- Consider the device virtual tree. In order to be able to reuse code,
  setup_parent() has been tweaked a bit.
- kobject_move() can fall back to the kset's kobject.
- sysfs_move_dir() uses the sysfs root dir as fallback.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc6-mm2:
>...
>  git-gfs2-nmw.patch
>...
>  git trees
>...

This patch makes the needlessly global gfs2_writepages() static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When the try lock of the glock failed in prepare_write we were
incorrectly exiting this function with the page still locked.
This was resulting in further I/O to this page hanging.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch removes the old cipher interface and related code.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Missing tab.  Missing entry in changelog
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Glock assertion failure found in '07 NFS connectathon. One of the NFSDs
is doing a "readdirplus" procedure call. It passes the logic into
gfs2_readdir() where it obtains its directory inode glock. This is then
followed by filehandle construction that invokes lookup code. It hits
the assertion failure while trying to obtain the inode glock again
inside gfs2_drevalidate().

This patch bypasses the recursive glock call if caller already holds the
lock.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>