This converts the drivers in drivers/usb/* to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Simon Arlott <cxacru@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@free.fr>
Cc: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: Cesar Miquel <miquel@df.uba.ar>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Michael Hund <mhund@ld-didactic.de>
Cc: Zack Parsons <k3bacon@gmail.com>
Cc: Melchior FRANZ <mfranz@aon.at>
Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>
Signed-off-by: NNémeth Márton <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix oops introduced by commit ae93a55b
(emi26: use request_firmware()):

usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
emi26 - firmware loader 1-1:1.0: emi26_probe start
usb 1-1: firmware: requesting emi26/loader.fw
usb 1-1: firmware: requesting emi26/bitstream.fw
usb 1-1: firmware: requesting emi26/firmware.fw
usb 1-1: emi26_set_reset - 1
usb 1-1: emi26_set_reset - 0
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading
Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic

Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG
EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0
EIP is at emi26_probe+0x2f7/0x620 [emi26]
EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000
ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000)
Stack:
 0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0
 0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0
 f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000
Call Trace:
 [<c01c6262>] sysfs_add_one+0x12/0x50
 [<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore]
 [<c01c70bf>] sysfs_create_link+0xf/0x20
 [<c02dead2>] driver_probe_device+0x82/0x180
 [<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore]
 [<c02dec4e>] __driver_attach+0x7e/0x80
 [<c02de27a>] bus_for_each_dev+0x3a/0x60
 [<c02de956>] driver_attach+0x16/0x20
 [<c02debd0>] __driver_attach+0x0/0x80
 [<c02de7b1>] bus_add_driver+0x1a1/0x220
 [<c02dee4d>] driver_register+0x4d/0x120
 [<c024e622>] idr_get_empty_slot+0xf2/0x290
 [<fbacab71>] usb_register_driver+0x81/0x100 [usbcore]
 [<f806c000>] emi26_init+0x0/0x14 [emi26]
 [<c0101126>] do_one_initcall+0x36/0x1b0
 [<c01c5e70>] sysfs_ilookup_test+0x0/0x10
 [<c0197a61>] ifind+0x31/0x90
 [<c01c6229>] __sysfs_add_one+0x59/0x80
 [<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0
 [<c0175ca3>] __vunmap+0xa3/0xd0
 [<c014b854>] load_module+0x1544/0x1640
 [<c014b9d7>] sys_init_module+0x87/0x1b0
 [<c0187f41>] sys_read+0x41/0x70
 [<c01032a5>] sysenter_do_call+0x12/0x21
 [<c03d0000>] wait_for_common+0x40/0x110
Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00
EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc
---[ end trace 2eefa13825431230 ]---

After the last "package" of firmware data is sent to the device, we dereference
NULL pointer (on access to rec->addr). Fix it.
Reported--by: NDavid Flatz <david@upcs.at>
Tested-by: NDavid Flatz <david@upcs.at>
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable <stable@kernel.org> [2.6.27, 2.6.28]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this drivers lacks an error check.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* Convert files to UTF-8.

  * Also correct some people's names
    (one example is Eißfeldt, which was found in a source file.
    Given that the author used an ß at all in a source file
    indicates that the real name has in fact a 'ß' and not an 'ss',
    which is commonly used as a substitute for 'ß' when limited to
    7bit.)

  * Correct town names (Goettingen -> Göttingen)

  * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

replace open coded kmemdup() to save some screen space,
and allow inlining/not inlining to be triggered by gcc.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's become apparent as machines get faster that the emagic kernel firmware
loaders (based on the ezusb loader) have a reset race.  a 400MHz TiBook
never tripped it, but a 2GHz Pentium M seems to hit it about 30% of the
time.  The bug is seen as a hung USB box and the kernel error:

drivers/usb/misc/emi62.c: emi62_load_firmware - error loading firmware:
error = -110

The patch below inserts a delay after deasserting reset to allow the box to
settle before a new command is issued.  This affects only device startup.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It is no longer needed, so let's remove it, saving a bit of memory.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!