Currently lguest has three threads: the main Launcher thread, a Waker
thread, and a thread for the block device (because synchronous block
was simply too painful to bear).

The Waker selects() on all the input file descriptors (eg. stdin, net
devices, pipe to the block thread) and when one becomes readable it calls
into the kernel to kick the Launcher thread out into userspace, which
repeats the poll, services the device(s), and then tells the kernel to
release the Waker before re-entering the kernel to run the Guest.

Also, to make a slightly-decent network transmit routine, the Launcher
would suppress further network interrupts while it set a timer: that
signal handler would write to a pipe, which would rouse the Waker
which would prod the Launcher out of the kernel to check the network
device again.

Now we can convert all our virtqueues to separate threads: each one has
a separate eventfd for when the Guest pokes the device, and can trigger
interrupts in the Guest directly.

The linecount shows how much this simplifies, but to really bring it
home, here's an strace analysis of single Guest->Host ping before:

* Guest sends packet, notifies xmit vq, return control to Launcher
* Launcher clears notification flag on xmit ring
* Launcher writes packet to TUN device
	writev(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"\366\r\224`\2058\272m\224vf\274\10\0E\0\0T\0\0@\0@\1\265"..., 98}], 2) = 108
* Launcher sets up interrupt for Guest (xmit ring is empty)
	write(10, "\2\0\0\0\3\0\0\0", 8) = 0
* Launcher sets up timer for interrupt mitigation
	setitimer(ITIMER_REAL, {it_interval={0, 0}, it_value={0, 505}}, NULL) = 0
* Launcher re-runs guest
	pread64(10, 0xbfa5f4d4, 4, 0) ...
* Waker notices reply packet in tun device (it was in select)
	select(12, [0 3 4 6 11], NULL, NULL, NULL) = 1 (in [4])
* Waker kicks Launcher out of guest:
	pwrite64(10, "\3\0\0\0\1\0\0\0", 8, 0) = 0
* Launcher returns from running guest:
	... = -1 EAGAIN (Resource temporarily unavailable)
* Launcher looks at input fds:
	select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 1 (in [4], left {0, 0})
* Launcher reads pong from tun device:
	readv(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"\272m\224vf\274\366\r\224`\2058\10\0E\0\0T\364\26\0\0@"..., 1518}], 2) = 108
* Launcher injects guest notification:
	write(10, "\2\0\0\0\2\0\0\0", 8) = 0
* Launcher rechecks fds:
	select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 0 (Timeout)
* Launcher clears Waker:
	pwrite64(10, "\3\0\0\0\0\0\0\0", 8, 0) = 0
* Launcher reruns Guest:
	pread64(10, 0xbfa5f4d4, 4, 0) = ? ERESTARTSYS (To be restarted)
* Signal comes in, uses pipe to wake up Launcher:
	--- SIGALRM (Alarm clock) @ 0 (0) ---
	write(8, "\0", 1)       = 1
	sigreturn()             = ? (mask now [])
* Waker sees write on pipe:
	select(12, [0 3 4 6 11], NULL, NULL, NULL) = 1 (in [6])
* Waker kicks Launcher out of Guest:
	pwrite64(10, "\3\0\0\0\1\0\0\0", 8, 0) = 0
* Launcher exits from kernel:
	pread64(10, 0xbfa5f4d4, 4, 0) = -1 EAGAIN (Resource temporarily unavailable)
* Launcher looks to see what fd woke it:
	select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 1 (in [6], left {0, 0})
* Launcher reads timeout fd, sets notification flag on xmit ring
	read(6, "\0", 32)       = 1
* Launcher rechecks fds:
	select(7, [0 3 4 6], NULL, NULL, {0, 0}) = 0 (Timeout)
* Launcher clears Waker:
	pwrite64(10, "\3\0\0\0\0\0\0\0", 8, 0) = 0
* Launcher resumes Guest:
	pread64(10, "\0p\0\4", 4, 0) ....

strace analysis of single Guest->Host ping after:

* Guest sends packet, notifies xmit vq, creates event on eventfd.
* Network xmit thread wakes from read on eventfd:
	read(7, "\1\0\0\0\0\0\0\0", 8)          = 8
* Network xmit thread writes packet to TUN device
	writev(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"J\217\232FI\37j\27\375\276\0\304\10\0E\0\0T\0\0@\0@\1\265"..., 98}], 2) = 108
* Network recv thread wakes up from read on tunfd:
	readv(4, [{"\0\0\0\0\0\0\0\0\0\0", 10}, {"j\27\375\276\0\304J\217\232FI\37\10\0E\0\0TiO\0\0@\1\214"..., 1518}], 2) = 108
* Network recv thread sets up interrupt for the Guest
	write(6, "\2\0\0\0\2\0\0\0", 8) = 0
* Network recv thread goes back to reading tunfd
	13:39:42.460285 readv(4,  <unfinished ...>
* Network xmit thread sets up interrupt for Guest (xmit ring is empty)
	write(6, "\2\0\0\0\3\0\0\0", 8) = 0
* Network xmit thread goes back to reading from eventfd
	read(7, <unfinished ...>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Currently, when a Guest wants to perform I/O it calls LHCALL_NOTIFY with
an address: the main Launcher process returns with this address, and figures
out what device to run.

A far nicer model is to let processes bind an eventfd to an address: if we
find one, we simply signal the eventfd.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Davide Libenzi <davidel@xmailserver.org>

lguest wants to attach eventfds to guest notifications, and lguest is
usually a module.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
To: Davide Libenzi <davidel@xmailserver.org>

We currently only allow the Launcher process to send interrupts, but it
as we already send interrupts from the hrtimer, it's a simple matter of
extracting that code into a common set_interrupt routine.

As we switch to a thread per virtqueue, this avoids a bottleneck through the
main Launcher process.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

1) j wasn't initialized in setup_pagetables, so they weren't set up for me
   causing immediate guest crashes.

2) gpte_addr should not re-read the pmd from the Guest.  Especially
   not BUG_ON() based on the value.  If we ever supported SMP guests,
   they could trigger that.  And the Launcher could also trigger it
   (tho currently root-only).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This version requires that host and guest have the same PAE status.
NX cap is not offered to the guest, yet.
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add support for kvm_hypercall4(); PAE wants it.

Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

replace LHCALL_SET_PMD with LHCALL_SET_PGD hypercall name
(That's really what it is, and the confusion gets worse with PAE support)
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reported-by: NJeremy Fitzhardinge <jeremy@goop.org>

Some cleanups and replace direct assignment with native_set_* macros which properly handle 64-bit entries when PAE is activated
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Map switcher with executable page table entries.
(This bug didn't matter before PAE and hence NX support -- RR)
Signed-off-by: NMatias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

I've never seen it here, but I can't find anywhere that says writev
will write everything.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The "len" field in the used ring for virtio indicates the number of
bytes *written* to the buffer.  This means the guest doesn't have to
zero the buffers in advance as it always knows the used length.

Erroneously, the console and network example code puts the length
*read* into that field.  The guest ignores it, but it's wrong.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If GDT_ENTRIES were every > 256, this could become a problem.

Signed-off-by: Matias Zabaljauregui <zabaljauregui at gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Do not go beyond ARRAY_SIZE of cpu->arch.gdt
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

18 months ago 5bbf89fc changed to loading
bzImages directly, and no longer manually ungzipping them, so we no longer
need libz.

Also, -m32 is useful for those on 64-bit platforms (and harmless on
32-bit).
Reported-by: NRon Minnich <rminnich@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The downside of the last patch which made restore_flags and irq_enable
check interrupts is that they are now too big to be patched directly
into the callsites, so the C versions are always used.

But the C versions go via PV_CALLEE_SAVE_REGS_THUNK which saves all
the registers.  In fact, we don't need any registers in the fast path,
so we can do better than this if we actually code them in assembler.

The results are in the noise, but since it's about the same amount of
code, it's worth applying.

1GB Guest->Host: input(suppressed),output(suppressed)
Before:
	Seconds: 0:16.53
	Packets: 377268,753673
	Interrupts: 22461,24297
	Notifications: 1(5245),21303(732370)
	Net IRQs triggered: 377023(245),42578(711095)

After:
	Seconds: 0:16.48
	Packets: 377289,753673
	Interrupts: 22281,24465
	Notifications: 1(5245),21296(732377)
	Net IRQs triggered: 377060(229),42564(711109)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest never checked for pending interrupts when enabling interrupts, and
things still worked.  However, it makes a significant difference to TCP
performance, so it's time we fixed it by introducing a pending_irq flag
and checking it on irq_restore and irq_enable.

These two routines are now too big to patch into the 8/10 bytes
patch space, so we drop that code.

Note: The high latency on interrupt delivery had a very curious
effect: once everything else was optimized, networking without GSO was
faster than networking with GSO, since more interrupts were sent and
hence a greater chance of one getting through to the Guest!

Note2: (Almost) Closing the same loophole for iret doesn't have any
measurable effect, so I'm leaving that patch for the moment.

Before:
	1GB tcpblast Guest->Host:		30.7 seconds
	1GB tcpblast Guest->Host (no GSO):	76.0 seconds

After:
	1GB tcpblast Guest->Host:		6.8 seconds
	1GB tcpblast Guest->Host (no GSO):	27.8 seconds
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

When the Guest does the LHCALL_HALT hypercall, we go to sleep, expecting
that a timer or the Waker will wake_up_process() us.

But we do it in a stupid way, leaving a classic missing wakeup race.

So split maybe_do_interrupt() into interrupt_pending() and
try_deliver_interrupt(), and check maybe_do_interrupt() and the
"break_out" flag before calling schedule.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

20887611 (lguest: notify on empty) introduced
lguest support for the VIRTIO_F_NOTIFY_ON_EMPTY flag, but in fact it turned on
interrupts all the time.

Because we always process one buffer at a time, the inflight count is always 0
when call trigger_irq and so we always ignore VRING_AVAIL_F_NO_INTERRUPT from
the Guest.

It should be looking to see if there are more buffers in the Guest's queue:
if it's empty, then we force an interrupt.

This makes little difference, since we usually have an empty queue; but
that's the subject of another patch.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The Launcher could be inside the Guest on another CPU; wake_up_process
will do nothing because it is "running".  kick_process will knock it
back into our kernel in this case, otherwise we'll miss it until the
next guest exit.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest needs kick_process: wake_up_process() does nothing if a process
is running, which isn't sufficient (we need it in the kernel).

And lguest support is usually modular.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>

Since the Launcher process runs the Guest, it doesn't have to be very
serious about its barriers: the Guest isn't running while we are (Guest
is UP).

Before we change to use threads to service devices, we need to fix this.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Copy from arch/x86/kernel/irqinit_32.c: we don't use the vectors beyond
LGUEST_IRQS (if any), but we might as well set them all.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We hand the /dev/lguest fd everywhere; it's far neater to just make it
a global (it already is, in fact, hidden in the waker_fds struct).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We can't trust the values in the device descriptor table once the
guest has booted, so keep local copies.  They could set them to
strange values then cause us to segv (they're 8 bit values, so they
can't make our pointers go too wild).

This becomes more important with the following patches which read them.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits)
  nilfs2: get rid of bd_mount_sem use from nilfs
  nilfs2: correct exclusion control in nilfs_remount function
  nilfs2: simplify remaining sget() use
  nilfs2: get rid of sget use for checking if current mount is present
  nilfs2: get rid of sget use for acquiring nilfs object
  nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
  remove the call to ->write_super in __sync_filesystem
  nilfs2: call nilfs2_write_super from nilfs2_sync_fs
  jffs2: call jffs2_write_super from jffs2_sync_fs
  ufs: add ->sync_fs
  sysv: add ->sync_fs
  hfsplus: add ->sync_fs
  hfs: add ->sync_fs
  fat: add ->sync_fs
  ext2: add ->sync_fs
  exofs: add ->sync_fs
  bfs: add ->sync_fs
  affs: add ->sync_fs
  sanitize ->fsync() for affs
  repair bfs_write_inode(), switch bfs to simple_fsync()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: remove unecessary include of thread_info.h in entry.S
  m68knommu: enumerate INIT_THREAD fields properly
  headers_check fix: m68k, swab.h
  arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug(
  m68knommu: remove obsolete reset code
  m68knommu: move CPU reset code for the 5272 ColdFire into its platform code
  m68knommu: move CPU reset code for the 528x ColdFire into its platform code
  m68knommu: move CPU reset code for the 527x ColdFire into its platform code
  m68knommu: move CPU reset code for the 523x ColdFire into its platform code
  m68knommu: move CPU reset code for the 520x ColdFire into its platform code
  m68knommu: add CPU reset code for the 532x ColdFire
  m68knommu: add CPU reset code for the 5249 ColdFire
  m68knommu: add CPU reset code for the 5206e ColdFire
  m68knommu: add CPU reset code for the 5206 ColdFire
  m68knommu: add CPU reset code for the 5407 ColdFire
  m68knommu: add CPU reset code for the 5307 ColdFire
  m68knommu: merge system reset for code ColdFire 523x family
  m68knommu: fix system reset for ColdFire 527x family

zalloc_cpumask_var already cleared it.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So we make sure MAXSMP gets a cleared cpumask
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 925d519a ("perf_counter:
unify and fix delayed counter wakeup") added global definitions.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This will remove every bd_mount_sem use in nilfs.

The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

nilfs_remount() changes mount state of a superblock instance.  Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().

Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:

  1. bdev->bd_mount_sem
  2. sb->s_umount  (sget acquires)

and nilfs_remount() holds:

  1. sb->s_umount  (locked by the caller in vfs)
  2. bdev->bd_mount_sem

To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().

With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved.  And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This simplifies the test function passed on the remaining sget()
callsite in nilfs.

Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device.  This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This will change the way to obtain nilfs object in nilfs_get_sb()
function.

Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.

This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The following EBUSY case in nilfs_get_sb() is meaningless.  Indeed,
this error code is never returned to the caller.

    if (!s->s_root) {
          ...
    } else if (!(s->s_flags & MS_RDONLY)) {
        err = -EBUSY;
    }

This simply removes the else case.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.

This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>