This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

let vga16fb claim 0xA0000+0x10000 region as its aperture;
drm drivers don't use it, so we have to detect it and kick
vga16fb manually - but only if drm is driving the primary card
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Currently vesafb/efifb/... is kicked when hardware driver is registering
framebuffer. To do it hardware must be fully functional, so there's a short
window between start of initialisation and framebuffer registration when
two drivers touch the hardware. Unfortunately sometimes it breaks nouveau
initialisation.

Fix it by kicking firmware driver(s) before we start touching the hardware.
Reported-by: NDidier Spaier <didier.spaier@epsm.fr>
Tested-by: NDidier Spaier <didier.spaier@epsm.fr>
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It removes a hack from nouveau code which had to detect which
region to pass to kick vesafb/efifb.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Add Amiga Zorro bus modalias and uevent support
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

The current allocation does not include the memory required for blanking
lines.  So avoid memory corruption when multiple devices are using the DMA
memory near each other.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are the files which should be available to subdevices compiled
outside of drivers/video/via.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The various subdev drivers (other than the framebuffer itself) no longer
need this file.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

It's ugly and adds a global.h dependency.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Preparatory move toward the ultimate goal of moving pan-subdevice stuff
into include/linux.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Properly localize error cleanup, and make sure that the iomem regions are
unmapped if framebuffer initialization fails.
Reported-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

gpiochip_remove() is not meant to be called with interrupts disabled, and
there is no need for the lock here in any case.
Reported-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

viafb: make procfs entries optional

This patch adds a config option to enable procfs entries for direct
hardware access. This was the old behaviour but the option defaults
to no as this is really ugly and should not be needed if the driver
works correct (and if it doesn't, it needs to be fixed).
That stuff is really something that should
- not be needed at all (the driver should be capable of doing it)
- not be there (debugfs would be better for such things)
So add this option just for backwards compatiblity.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

viafb: fix proc entry removal

Trying to remove unregistered proc entries became painful and is
useless anyway. So remove the removal of an entry that was never
registered and duplicate the logic for one which is added
conditionally. Additionally move the removal above releasing fb_info
as we still need the information.
This prevents tainting the kernel by the procfs warn on and
avoiding access to already freed memory is probably also a good idea.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

viafb: improve misc register handling

This patch improves the misc register handling by adding a modify
function for this to via_io.h and moving expanded definitions of the
relevant ports there. The code was changed to use those to improve
readability.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

viafb: replace inb/outb

This patch replaces occurences of inb/outb with via_write_reg and
via_write_reg_mask where this is possible to improve code
readability.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

viafb: move some modesetting functions to a seperate file

This patch moves the modesetting functions which are already cleaned up
to a seperate file.
Just the beginning to bring some structure in this mess.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

viafb: unify modesetting functions

This patch unifies some cleaned up modesetting functions to prepare for
moving them to an extra file. This includes make them use via_io and
changing there names to reflect that they do not depend on anything
framebuffer specific.
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

The camera engine captures to framebuffer memory, so we need to set some
aside for that purpose.  There is no proper memory allocator for fbmem;
instead, accel.c just trims some space off the top.  Alas, without creating
that proper memory allocator, the only way to make this work is to hack it
into the same bit of code in accel.c.  The allocation must happen *after*
the others (some code, including user-space XV stuff, makes assumptions on
where the cursor space is), and before the rest of the framebuffer is set
up.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This code provides a minimal amount of access to the DMA engine as
needed by the camera driver.  VX855 only; it's guaranteed not to work
on other chipsets, so it won't try.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The viafb device shares a single interrupt control register among several
distinct subunits.  This adds a simple layer for management of that
register.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The code was ugly and didn't check whether i2c operations were succeeding;
make it a little better.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The camera driver will need this to look up a specific adapter.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

If an adapter has been configured for GPIO (or off), we should not try to
use it as an I2C port.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Another step toward making this thing a real multifunction device driver.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Also add low-level locking to the i2c driver.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This patch puts redesigned versions of the basic io functions that
are used overall the driver in an extra header. It is prefixed with
via_ as no framebuffer dependend stuff is in there. They were inlined
as they are really simple which reduced the module size about 2.5%.
The parameter order of read and write was fixed as it really doesn't
make sense to change the order as they are parts of the same address
and not source and destination.
Wrapper which use the new functions were added to hw.h to replicate
the old interface and avoid changing all old code.

[jc: added one comment]
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This is a simple gpiolib driver giving access to the GPIO lines in the
VIA framebuffer system.  A simple mechanism exists for switching lines
between GPIO and I2C, but it's only compile-time for now.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This patch moves data of interest into a new viafb_dev structure which
describes the device as a whole; the idea here is to create a separation
between what all devices may need and what the framebuffer device in
particular needs.

I've also made some small steps toward thinning out the global.h mess.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

The first step toward turning viafb into a multifunction driver.  This
patch creates a new via-core.c file which serves as the main PCI driver;
everything else comes below that.  Some work has been done to rationalize
the i2c drivers in this new scheme.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Fix a number of Oopses, memory leaks and unbalanced calls on error paths in
sh_mobile_lcdcfb.c.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Since the drivers probe call was changed from .init.text
to .devinit.text in commit c2e13037
the fb_fix_screeninfo structure must be
changed from .init.data to .devinit.data, too.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Tested-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

...otherwise it seems we run into conflicts with shadowy other users which
don't expect to see i2c taking control of ports it never used to do
anything with.
Reported-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

[jc: no signoff, added my own]
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This patch changes the way how the various I2C busses are used internally
inside the viafb driver:  Previosuly, only a single i2c_adapter was created,
even though two different hardware I2C busses are accessed: A structure member
in a global variable was modified to indicate the bus to be used.

Now, all existing hardware busses are registered with the i2c core, and the
viafb_i2c_{read,write}byte[s]() function take the adapter number as function
call parameter, rather than referring to the global structure member.

[jc: even more painful merge with mainline changes ->2.6.34]
[jc: painful merge with OLPC changes]

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Description of patch:
---------------------

This is a patch for the EFI framebuffer driver to enable the framebuffer
of the NVIDIA 9400M as found in MacBook Pro (MBP) 5,1 and up.  The
framebuffer of the NVIDIA graphic cards are located at the following
addresses in memory:

9400M:    0xC0010000
9600M GT: 0xB0030000

The patch delivered right here only provides the memory location of the
framebuffer of the 9400M device.  The 9600M GT is not covered.  It is
assumed that the 9400M is used when powered up the MBP.

The information which device is currently powered and in use is stored in
the 64 bytes large EFI variable "gpu-power-prefs".  More specifically,
byte 0x3B indicates whether 9600M GT (0x00) or 9400M (0x01) is online.

The PCI bus IDs are the following:
9400M:    PCI 03:00:00
9600M GT: PCI 02:00:00

The EFI variables can be easily read-out and manipulated with "rEFIt", an
MBP specific bootloader tool.  For more information on how handle rEFIt
and EFI variables please consult "http://refit.sourceforge.net" and
"http://ubuntuforums.org/archive/index.php/t-1076879.html".

IMPORTANT NOTE: The information on how to activate the 9400M device given
at "ubuntuforums.org" is not correct, since it states

gpu-power-prefs[0x3B] = 0x00 -> 9400M (PCI 02:00:00)
gpu-power-prefs[0x3B] = 0x01 -> 9600M GT (PCI 03:00:00)

Actually, the assignment of the values and the PCI bus IDs are swapped.

Suggestions:
------------

To cover framebuffers of both 9400M and 9600M GT, I would suggest to
implement a conditional on "gpu-power-prefs".  Depending on the value of
byte 0x3B, the according framebuffer is selected.  However, this requires
kernel access to the EFI variables.

[akpm@linux-foundation.org: rename optname, per Peter Jones]
Signed-off-by: NThomas Gerlach <t.m.gerlach@freenet.de>
Acked-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[jc: extensive merge conflict fixes]
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: NChris Ball <cjb@laptop.org>

This patch is a painful merge of change
a90bab567ece3e915d0ccd55ab00c9bb333fa8c0 (viafb: Add support for 2D
accelerated framebuffer on VX800/VX855) in the OLPC tree, originally by
Harald Welte.  Harald's changelog read:

	The VX800/VX820 and the VX855/VX875 chipsets have a different 2D
    	acceleration engine called "M1".  The M1 engine has some subtle
    	(and some not-so-subtle) differences to the previous engines, so
    	support for accelerated framebuffer on those chipsets was disabled
    	so far.

This merge tries to preserve Harald's changes in the framework of the
much-changed 2.6.34 viafb code.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

This will help us for the upcoming support for 2D acceleration using
the M1 engine.

[jc: fixed merge conflicts]
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>