GFS2's fallocate code currently goes through the page cache. Since it's only
writing to the end of the file or to holes in it, it doesn't need to, and it
was causing issues on low memory environments. This patch pulls in some of
Steve's block allocation work, and uses it to simply allocate the blocks for
the file, and zero them out at allocation time.  It provides a slight
performance increase, and it dramatically simplifies the code.
Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch improves the performance of delete/unlink
operations in a GFS2 file system where the files are large
by adding a layer of metadata read-ahead for indirect blocks.
Mileage will vary, but on my system, deleting an 8.6G file
dropped from 22 seconds to about 4.5 seconds.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Bob reported:

I found an off-by-one problem with how I coded this section:
It should be:

+ else if (blk >= cur->rd_data0 + cur->rd_data)

In fact, cur->rd_data0 + cur->rd_data is the start of the next
rgrp (the next ri_addr), so without the "=" check it can land on
the wrong rgrp.

In all normal cases, this won't be a problem: you're searching
for a block _within_ the rgrp, which will pass the test properly.
Where it gets into trouble is if you search the rgrps for the
block exactly equal to ri_addr.  I don't think anything in the
kernel does this, but I found a place in gfs2-utils gfs2_edit
where it does.  So I definitely need to fix it in libgfs2.  I'd
like to suggest we fix it in the kernel as well for the sake of
keeping the functions similar.

So this patch fixes the above mentioned off by one error as well
as removing the unused parent pointer.
Reported-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch brings gfs2's ->page_mkwrite uptodate with respect to the
expectations set by the VM. Also added is a check to wait if the fs
is frozen, before we attempt to get a glock. This will only work on
the node which initiates the freeze, but thats ok since the transaction
lock will still provide the expected barrier on other nodes.

The major change here is that we return a locked page now, except when
we don't return a page at all (error cases). This removes the race
which required rechecking the page after it was returned.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Nick Piggin <npiggin@kernel.dk>

The new goal block should be set to the end of the newly
allocated extent, not the start of it.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Unfortunately, it is not enough to just ignore locked buffers during
the AIL flush from fsync. We need to be able to ignore all buffers
which are locked, dirty or pinned at this stage as they might have
been added subsequent to the log flush earlier in the fsync function.

In addition, this means that we no longer need to rely on i_mutex to
keep out writes during fsync, so we can, as a side-effect, remove
that protection too.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Tested-By: NAbhijith Das <adas@redhat.com>

Each block which is deallocated, requires a call to gfs2_rlist_add()
and each of those calls was calling gfs2_blk2rgrpd() in order to
figure out which rgrp the block belonged in. This can be speeded up
by making use of the rgrp cached in the inode. We also reset this
cached rgrp in case the block has changed rgrp. This should provide
a big reduction in gfs2_blk2rgrpd() calls during deallocation.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The recursive_scan() function only ever takes a single "bc"
argument, so we might as well just call do_strip() directly
from resource_scan() rather than pass it in as an argument.

Also the "data" argument is always a struct strip_mine, so
we can pass that in, rather than using a void pointer.

This also moves do_strip() ahead of recursive_scan() so that
we don't need to add a prototype.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Given that a resource group has been locked, there is no reason why
we should not be able to allocate as many blocks as are free. The
al_requested parameter should really be considered as a minimum
number of blocks to be available. Should this limit be overshot,
there are other mechanisms which will prevent over allocation.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This means that after the initial allocation for any inode, the
last used resource group is cached in the inode for future use.
This drastically reduces the number of lookups of resource
groups in the common case, and this the contention on that
data structure.

The allocation algorithm is the same as previously, except that we
always check to see if the goal block is within the cached rgrp
first before going to the rbtree to look one up.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:

Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.

Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.

Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.

Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.

Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.

However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.

The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.

This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.

The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.

In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>

We need to take the inode's glock whenever the inode's size
is referenced, otherwise it might not be uptodate. Even
though generic_file_llseek_unlocked() doesn't implement
SEEK_DATA, SEEK_HOLE directly, it does reference the inode's
size in those cases, so we need to add them to the list
of origins which need the glock.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>

If we pass through knowledge of whether the creation is intended to be
exclusive or not, then we can deal with that in gfs2_create_inode
and remove one set of locking. Also this removes the loop in
gfs2_create and simplifies the code a bit.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The aim of this patch is to use the newly enhanced ->dirty_inode()
super block operation to deal with atime updates, rather than
piggy backing that code into ->write_inode() as is currently
done.

The net result is a simplification of the code in various places
and a reduction of the number of gfs2_dinode_out() calls since
this is now implied by ->dirty_inode().

Some of the mark_inode_dirty() calls have been moved under glocks
in order to take advantage of then being able to avoid locking in
->dirty_inode() when we already have suitable locks.

One consequence is that generic_write_end() now correctly deals
with file size updates, so that we do not need a separate check
for that afterwards. This also, indirectly, means that fdatasync
should work correctly on GFS2 - the current code always syncs the
metadata whether it needs to or not.

Has survived testing with postmark (with and without atime) and
also fsx.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Journaled data requires that a complete flush of all dirty data for
the file is done, in order that the ail flush which comes after
will succeed.

Also the recently enhanced bug trap can trigger falsely in case
an ail flush from fsync races with a page read. This updates the
bug trap such that it will ignore buffers which are locked and
only trigger on dirty and/or pinned buffers when the ail flush
is run from fsync. The original bug trap is retained when ail
flush is run from ->go_sync()
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.

Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We do not need to start a transaction unless the atime
check has proved positive. Also if we are going to flush
the complete ail list anyway, we might as well skip the
writeback for this specific inode's metadata, since that
will be done as part of the ail writeback process in an
order offering potentially more efficient I/O.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

The assert was being tested under the wrong lock, a
legacy of the original code. Also, if it does trigger,
the resulting information was not always a lot of help.

This moves the patch under the correct lock and also
prints out more useful information in tacking down the
source of the problem.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Now that the data writing is part of fsync proper, we can split
the waiting part out and do it later on. This reduces the
number of waits that we do during fsync on average.

There is also no need to take the i_mutex unless we are flushing
metadata to disk, so we can move that to within the metadata
flushing code.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Since there is now only a single caller to gfs2_dir_read_data()
and it has a number of constant arguments, we can factor
those out. Also some tests relating to the inode size were
being done twice.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Add alignment flag to PCI expansion resources
  sparc: Avoid calling sigprocmask()
  sparc: Use set_current_blocked()
  sparc32,leon: SRMMU MMU Table probe fix

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fib_rules: fix unresolved_rules counting
  r8169: fix wrong eee setting for rlt8111evl
  r8169: fix driver shutdown WoL regression.
  ehea: Change maintainer to me
  pptp: pptp_rcv_core() misses pskb_may_pull() call
  tproxy: copy transparent flag when creating a time wait
  pptp: fix skb leak in pptp_xmit()
  bonding: use local function pointer of bond->recv_probe in bond_handle_frame
  smsc911x: Add support for SMSC LAN89218
  tg3: negate USE_PHYLIB flag check
  netconsole: enable netconsole can make net_device refcnt incorrent
  bluetooth: Properly clone LSM attributes to newly created child connections
  l2tp: fix a potential skb leak in l2tp_xmit_skb()
  bridge: fix hang on removal of bridge via netlink
  x25: Prevent skb overreads when checking call user data
  x25: Handle undersized/fragmented skbs
  x25: Validate incoming call user data lengths
  udplite: fast-path computation of checksum coverage
  IPVS netns shutdown/startup dead-lock
  netfilter: nf_conntrack: fix event flooding in GRE protocol tracker

I don't usually pay much attention to the stale "? " addresses in
stack backtraces, but this lucky report from Pawel Sikora hints that
mremap's move_ptes() has inadequate locking against page migration.

 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page():
 kernel BUG at include/linux/swapops.h:105!
 RIP: 0010:[<ffffffff81127b76>]  [<ffffffff81127b76>]
                       migration_entry_wait+0x156/0x160
  [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0
  [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120
  [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310
  [<ffffffff81102a31>] handle_mm_fault+0x181/0x310
  [<ffffffff81106097>] ? vma_adjust+0x537/0x570
  [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0
  [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570
  [<ffffffff81421d5f>] page_fault+0x1f/0x30

mremap's down_write of mmap_sem, together with i_mmap_mutex or lock,
and pagetable locks, were good enough before page migration (with its
requirement that every migration entry be found) came in, and enough
while migration always held mmap_sem; but not enough nowadays, when
there's memory hotremove and compaction.

The danger is that move_ptes() lets a migration entry dodge around
behind remove_migration_pte()'s back, so it's in the old location when
looking at the new, then in the new location when looking at the old.

Either mremap's move_ptes() must additionally take anon_vma lock(), or
migration's remove_migration_pte() must stop peeking for is_swap_entry()
before it takes pagetable lock.

Consensus chooses the latter: we prefer to add overhead to migration
than to mremapping, which gets used by JVMs and by exec stack setup.
Reported-and-tested-by: NPaweł Sikora <pluto@agmk.net>
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently no type of alignment is specified for PCI expansion roms while 
parsing the openfirmware tree. This causes calls to pci_map_rom() to fail.
IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in 
pci/probe.c, and has been verified to work with various cards on a ultra 10.
Signed-off-By: NKjetil Oftedal <oftedal@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

we should decrease ops->unresolved_rules when deleting a unresolved rule.
Signed-off-by: NZheng Yan <zheng.z.yan@intel.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct the wrong parameter for setting EEE for RTL8111E-VL.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to commit 92fc43b4 ("r8169: modify the
flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on
RxConfig bits which are needed for WOL on some versions of the hardware.

As these bits were formerly set from the r81{0x, 68}_pll_power_down methods,
factor them out for use in the driver shutdown (rtl_shutdown) handler.

I favored __rtl8169_get_wol() -hardware state indication- over
RTL_FEATURE_WOL as the latter has become a good candidate for removal.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
Tested-by: NMarc Ballarin <ballarin.marc@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Breno Leitao has passed the maintainership to me.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: NBreno Leitão <leitao@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
  [media] videodev: fix a NULL pointer dereference in v4l2_device_release()

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/atom: fix handling of FB scratch indices
  drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2)
  drm/radeon/kms/DCE4.1: ss is not supported on the internal pplls
  drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping
  ttm: Fix error-path using an uninitialized value

The change in 8280b662 does not cover the case when v4l2_dev is already
NULL, fix that.

With a Kinect sensor, seen as an USB camera using GSPCA in this context,
a NULL pointer dereference BUG can be triggered by just unplugging the
device after the camera driver has been loaded.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

FB scratch indices are dword indices, but we were treating
them as byte indices.  As such, we were getting the wrong
FB scratch data for non-0 indices.  Fix the indices and
guard the indexing against indices larger than the scratch
allocation.

Fixes memory corruption on some boards if data was written
past the end of the FB scratch array.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reported-by: NDave Airlie <airlied@redhat.com>
Tested-by: NDave Airlie <airlied@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

e1000e uses paged frags, so any layer incorrectly pulling bytes from skb
can trigger a BUG in skb_pull()

[951.142737]  [<ffffffff813d2f36>] skb_pull+0x15/0x17
[951.142737]  [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp]
[951.152725]  [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105
[951.163558]  [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp]
[951.165092]  [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre]
[951.165092]  [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1
[951.177599]  [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1
[951.177599]  [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58
[951.177599]  [<ffffffff81410996>] ip_local_deliver+0x51/0x55
[951.177599]  [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e
[951.177599]  [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e
[951.204898]  [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58
[951.214651]  [<ffffffff81410bb5>] ip_rcv+0x21b/0x246

pptp_rcv_core() is a nice example of a function assuming everything it
needs is available in skb head.
Reported-by: NBradley Peterson <despite@gmail.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The transparent socket option setting was not copied to the time wait
socket when an inet socket was being replaced by a time wait socket. This
broke the --transparent option of the socket match and may have caused
that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state
were being dropped by the packet filter.
Signed-off-by: NKOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case we cant transmit skb, we must free it
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
CC: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bond->recv_probe is called in bond_handle_frame() when
a packet is received, but bond_close() sets it to NULL. So,
a panic occurs when both functions work in parallel.

Why this happen:
After null pointer check of bond->recv_probe, an sk_buff is
duplicated and bond->recv_probe is called in bond_handle_frame.
So, a panic occurs when bond_close() is called between the
check and call of bond->recv_probe.

Patch:
This patch uses a local function pointer of bond->recv_probe
in bond_handle_frame(). So, it can avoid the null pointer
dereference.
Signed-off-by: NMitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

LAN89218 is register compatible with LAN911x.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This
results tg3_phy_fini->phy_disconnect is never called and when tg3 module
is removed.

In my case this resulted in panics in phy_state_machine calling function
phydev->adjust_link.

So correct this check.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Acked-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no check if netconsole is enabled current.
so when exec echo 1 > enabled;
the reference of net_device will increment always.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Acked-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>