- 29 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Instead of static snd_kcontrol_new arrays, create "Capture Volume" and "Capture Switch" controls dynamically based on the mixer attr values (made via HDA_COMPOSE_AMP_VAL()). This reduces the code size and gives more flexibility to change the number of controls later. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
The current driver creates always the digital input source mixer elements for IDT 92HD71x codecs no matter whether digital mics are present. This patch adds the proper check to avoid the creation of these controls if unnecessary. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The sentense "Unknown model for xxx, ..." makes people too nervous and drives them to a direction to a wrong "fix" by giving any mismatching model option. Let's rephrase the messages to be more nice and easy (at least that won't make people suspect conspiracies). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add a helper macro to retrieve the widget type from wiget cap bits. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 7月, 2009 3 次提交
-
-
由 Jaroslav Kysela 提交于
This patch adds a check to snd_hda_get_connections() routine for presence of AC_WCAP_CONN_LIST. Also, make sure that negative error codes from noted route are handled on all places as errors. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use snprint() for creating the jack name string instead of sprintf() in patch_sigmatel.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add some tricks to reduce the click noise at powering down to D3 in the power saving mode on STAC/IDT codecs. The key seems to be to reset PINs before the power-down, and some delay before entering D3. The needed delay is significantly long, but I don't know why. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 7月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Hao Song 提交于
Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by: NHao Song <baritono.tux@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 7月, 2009 1 次提交
-
-
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Make the jack-plug notification via input layer selectable via Kconfig. This is often unnecessary, and the similr function will be provided using the ALSA control API in near future anyway. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix the comparison of unsigned int that causes a compile warning below by changing to the right signed type: patch_sigmatel.c: In function ‘stac92xx_vref_set’: patch_sigmatel.c:658: warning: comparison of unsigned expression < 0 is always false Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 6月, 2009 1 次提交
-
-
由 Simos Xenitellis 提交于
A quirk is required for 8086:284b (rev 03) [Subsystem: 161f:2073]. The following has been tested with Alsa 1.0.20 (git master). Background details can be found at https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4561 http://forum.ubuntu-gr.org/viewtopic.php?f=38&t=5290Tested-by: NTheodora Iliopoulou <th30dr@gmail.com> Signed-off-by: NSimos Xenitellis <simos@gnome.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The reset of a BUS controller during operations is somehow risky and shouldn't be done inevitably for devices that have apparently no such codec-communication problems. This patch adds the check of the hardware and limits the bus-reset capability. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 6月, 2009 1 次提交
-
-
由 Nickolas Lloyd 提交于
This patch changes Line In as Out Switch and Mic In as Out Switch to enums for consistency, and causes all mic and line in ports to be probed and controls to be added appropriately. Signed-off-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The commit 86d190e7 reverted the bit flip of LED GPIO for HP DX and DV4-1222nr. Fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
- Remove unneeded semicolons - Introduce spec->gpio_led to specify the GPIO bit for LED control Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The digital beep tone is calculated in two different ways depending on the codec chip. The standard one is using a divider, and another one is a linear tone for IDT/STAC codecs. Currently, only the latter type is used for all codecs, which resulted in a wrong tone pitch. This patch adds the calculation of the standard HD-audio type. Also clean-up the fields in hda_beep struct. Reference: bko#13162 http://bugzilla.kernel.org/show_bug.cgi?id=13162Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 5月, 2009 1 次提交
-
-
由 Nickolas Lloyd 提交于
This patch adds a mixer control for the STAC92XX boards to control the DC bias of mic ports, allowing recording from both powered and non-powered sources. It replaces the "Mic Output Switch" with "Mic Jack Mode" to switch between Mic, Line In, and Line Out. Signed-off-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to the line-in jack, and it confuses the driver as if it's a valid input. This patch adds the check of OUTPUT bit so that the driver fixes the invalid pin setup. Tested-by: NTino Keitel <tino.keitel@gmx.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 5月, 2009 1 次提交
-
-
由 James Gardiner 提交于
Signed-off-by: NJames Gardiner <renidragsemaj@yahoo.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 4月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
When the headphone can have no unique DAC, the current code doesn't check the HP-detection although it should. Put the hp-detection check before the DAC check to fix this bug. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 4月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Don't call snd_jack_report at release of sigmatel and conexnat codecs which results in Oops at unloading the module. The Oops is triggered by the power-up sequence during the free due to the pincfg restoration. Since the power-up sequence is involved with the unsol handling, the jack reporting may be issued during that. The Oops occurs with this jack reporting because the jack instances have been already released but the codec doesn't do the proper book-keeping. This patch adds the book-keeping of jack instances to avoid the access to bogus pointers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2009 1 次提交
-
-
由 Matthew Ranostay 提交于
Add powerdown sequence for VREF using a shared jack when the headphone is present and the microphone isn't on. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 4月, 2009 1 次提交
-
-
由 Matthew Ranostay 提交于
Added device id in struct for codec 92HD81B1C (0x111d76d5). Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 3月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Replace with the standard function calls to use caches for reading the widget caps and pin caps. hda_proc.c is still using the direct verbs to get raw values as much as possible. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added snd_hda_query_pin_caps() to read and cache pin-cap values to avoid too frequently issuing the same verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
HP laptops require GPIO0 on as EAPD. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the default pin config for model=vaio (in case of broken BIOS). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 3月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
Also re-ordered the quirk entries per SSID. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Christoph Plattner 提交于
Code rework, comments of mail tiwai@suse.de (2009-03-09) incorporated. Code tested on HP HDX16 (not tested on HDX18 yet). Signed-off-by: NChristoph Plattner <christoph.plattner@gmx.at> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Christoph Plattner 提交于
Added codec recognition of HP HDX platforms and added support of the MUTE LED (orange/white). For this feature the CONFIG_SND_HDA_POWER_SAVE is needed to use event handling for mute control. Signed-off-by: NChristoph Plattner <christoph.plattner@gmx.at> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 3月, 2009 6 次提交
-
-
由 Takashi Iwai 提交于
Assign DACs to HP and speaker before mic-in/line-in shared outputs. This improves the usability as it results in more intuitive mixer names. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In stac92xx_auto_fill_dac_nids[], connect to the primary DAC if no individual DAC is available for each pin. This ensures that the pin works somehow at least. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Create multiple "Headphone" and "Speaker" controls with non-zero index numbers instead of "Headphone2", etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Improve the parser to pick up more intuitive control names for the outputs judging from the pin type, instead of fixed names assigned to channels. Also, revive the multi-HP workaround since this change fixes the problem with the multi-HP detection. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The recent changes over the DAC detection mechanism in patch_sigmatel.c breaks the HP detection on the machines with multiple HP jacks. It's basically because of the workaround to support the multi-channel output. Since the HP detection is more important feature, disable the HP-swap workaroud temporarily. Reference: Novell bnc#482052 https://bugzilla.novell.com/show_bug.cgi?id=482052Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
"Headphone Playback ..." appears twice in slave_vols[] and slave_sws[]. They should be "Headphone Playback2 ..." Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Allow more options to be set/reset via hwdep hint entry. hp_detect, gpio_mask, gpio_dir, gpio_data, eapd_mask and eapd_switch can be checked. For example, to disable hp_detect on the fly, # echo "hp_detect=0" > /sys/class/sound/hwC0D0/hints Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-