These VM_<READfoo> macros aren't used very often and three of them
aren't used at all.

Expand the ones that are used in-place, and remove all the now unused
#define VM_<foo> macros.

VM_READHINTMASK, VM_NormalReadHint and VM_ClearReadHint were added just
before 2.4 and appears have never been used.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The old codes accumulate addr to get right pmd, however, currently pmds
are preallocated and transfered as a parameter, there is unnecessary to
accumulate addr variable any more, this patch remove it.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Transparent huge zero page is used during the page fault instead of in
khugepaged.

  # ls /sys/kernel/mm/transparent_hugepage/
  defrag  enabled  khugepaged  use_zero_page
  # ls /sys/kernel/mm/transparent_hugepage/khugepaged/
  alloc_sleep_millisecs  defrag  full_scans  max_ptes_none  pages_collapsed  pages_to_scan  scan_sleep_millisecs

This patch corrects the documentation just like the codes done.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The default zonelist order selecter will select "node" order if any nodes
DMA zone comprises greater than 70% of its local memory instead of 60%,
according to default_zonelist_order::low_kmem_size > total * 70/100.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 839a8e86 ("writeback: replace custom worker pool
implementation with unbound workqueue"), there is no bdi forker thread
any more.  However, WB_REASON_FORKER_THREAD is still used due to it is
TPs userland visible and we won't be exposing exactly the same
information with just a different name.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 839a8e86 ("writeback: replace custom worker pool
implementation with unbound workqueue"), bdi_writeback_workfn runs off
bdi_writeback->dwork, on each execution, it processes bdi->work_list and
reschedules if there are more things to do instead of flush any work
that race with us existing.  It is unecessary to check force_wait in
wb_do_writeback since it is always 0 after the mentioned commit.  This
patch remove the force_wait in wb_do_writeback.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wb_reason_name is not used any more - remove it.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's not used globally and could be static.
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_MEMORY_HOTREMOVE unset, there is a compile warning:

  mm/sparse.c:755: warning: `clear_hwpoisoned_pages' defined but not used

And Bisecting it ended up pointing to 4edd7cef ("mm, hotplug: avoid
compiling memory hotremove functions when disabled").

This is because the commit above put sparse_remove_one_section() within
the protection of CONFIG_MEMORY_HOTREMOVE but the only user of
clear_hwpoisoned_pages() is sparse_remove_one_section(), and it is not
within the protection of CONFIG_MEMORY_HOTREMOVE.

So put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE should fix
the warning.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function is nowhere used, and it has a confusing name with put_page
in mm/swap.c.  So better to remove it.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vfree() only needs schedule_work(&p->wq) if p->list was empty, otherwise
vfree_deferred->wq is already pending or it is running and didn't do
llist_del_all() yet.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In __rmqueue_fallback(), current_order loops down from MAX_ORDER - 1 to
the order passed.  MAX_ORDER is typically 11 and pageblock_order is
typically 9 on x86.  Integer division truncates, so pageblock_order / 2
is 4.  For the first eight iterations, it's guaranteed that
current_order >= pageblock_order / 2 if it even gets that far!

So just remove the unlikely(), it's completely bogus.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Suggested-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions are nowhere used, so remove them.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The callers of build_zonelists_node always pass MAX_NR_ZONES -1 as the
zone_type argument, so we can directly use the value in
build_zonelists_node and remove zone_type argument.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add maintainer information for zswap and zbud into the MAINTAINERS file.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

0xc just means MOVABLE + DMA32, which results in zone DMA32.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memory we used to hold the memcg arrays is currently accounted to
the current memcg.  But that creates a problem, because that memory can
only be freed after the last user is gone.  Our only way to know which
is the last user, is to hook up to freeing time, but the fact that we
still have some in flight kmallocs will prevent freeing to happen.  I
believe therefore to be just easier to account this memory as global
overhead.
Signed-off-by: NGlauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memory we used to hold the memcg arrays is currently accounted to
the current memcg.  But that creates a problem, because that memory can
only be freed after the last user is gone.  Our only way to know which
is the last user, is to hook up to freeing time, but the fact that we
still have some in flight kmallocs will prevent freeing to happen.  I
believe therefore to be just easier to account this memory as global
overhead.

This patch (of 2):

Disabling accounting is only relevant for some specific memcg internal
allocations.  Therefore we would initially not have such check at
memcg_kmem_newpage_charge, since direct calls to the page allocator that
are marked with GFP_KMEMCG only happen outside memcg core.  We are
mostly concerned with cache allocations and by having this test at
memcg_kmem_get_cache we are already able to relay the allocation to the
root cache and bypass the memcg caches altogether.

There is one exception, though: the SLUB allocator does not create large
order caches, but rather service large kmallocs directly from the page
allocator.  Therefore, the following sequence, when backed by the SLUB
allocator:

	memcg_stop_kmem_account();
	kmalloc(<large_number>)
	memcg_resume_kmem_account();

would effectively ignore the fact that we should skip accounting, since
it will drive us directly to this function without passing through the
cache selector memcg_kmem_get_cache.  Such large allocations are
extremely rare but can happen, for instance, for the cache arrays.

This was never a problem in practice, because we weren't skipping
accounting for the cache arrays.  All the allocations we were skipping
were fairly small.  However, the fact that we were not skipping those
allocations are a problem and can prevent the memcgs from going away.
As we fix that, we need to make sure that the fix will also work with
the SLUB allocator.
Signed-off-by: NGlauber Costa <glommer@openvz.org>
Reported-by: NMichal Hocko <mhocko@suze.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should check the VM_UNITIALIZED flag in s_show().  If this flag is
set, that said, the vm_struct is not fully initialized.  So it is
unnecessary to try to show the information contained in vm_struct.

We checked this flag in show_numa_info(), but I think it's better to
check it earlier.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

VM_UNLIST was used to indicate that the vm_struct is not listed in
vmlist.

But after commit 4341fa45 ("mm, vmalloc: remove list management of
vmlist after initializing vmalloc"), the meaning of this flag changed.
It now means the vm_struct is not fully initialized.  So renaming it to
VM_UNINITIALIZED seems more reasonable.

Also change clear_vm_unlist to clear_vm_uninitialized_flag.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use goto to jump to the fail label to give a failure message before
returning NULL.  This makes the failure handling in this function
consistent.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As we have removed the dead code in the vb_alloc, it seems there is no
place to use the alloc_map.  So there is no reason to maintain the
alloc_map in vmap_block.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function is nowhere used now, so remove it.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Space in a vmap block that was once allocated is considered dirty and
not made available for allocation again before the whole block is
recycled.  The result is that free space within a vmap block is always
contiguous.

So if a vmap block has enough free space for allocation, the allocation
is impossible to fail.  Thus, the fragmented block purging was never
invoked from vb_alloc().  So remove this dead code.

[ Same patches also sent by:

    Chanho Min <chanho.min@lge.com>
    Johannes Weiner <hannes@cmpxchg.org>

  but git doesn't do "multiple authors" ]
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is an extra semi-colon so the function always returns.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When calculating pages in a node, for each zone in that node, we will
have

  zone_spanned_pages_in_node
    --> get_pfn_range_for_nid
  zone_absent_pages_in_node
    --> get_pfn_range_for_nid

That is to say, we call the get_pfn_range_for_nid to get start_pfn and
end_pfn of the node for MAX_NR_ZONES * 2 times.  And this is totally
unnecessary if we call the get_pfn_range_for_nid before
zone_*_pages_in_node add two extra arguments node_start_pfn and
node_end_pfn for zone_*_pages_in_node, then we can remove the
get_pfn_range_in_node in zone_*_pages_in_node.

[akpm@linux-foundation.org: make definitions more readable]
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A few remaining architectures directly kill the page faulting task in an
out of memory situation.  This is usually not a good idea since that
task might not even use a significant amount of memory and so may not be
the optimal victim to resolve the situation.

Since 2.6.29's 1c0fe6e3 ("mm: invoke oom-killer from page fault") there
is a hook that architecture page fault handlers are supposed to call to
invoke the OOM killer and let it pick the right task to kill.  Convert
the remaining architectures over to this hook.

To have the previous behavior of simply taking out the faulting task the
vm.oom_kill_allocating_task sysctl can be set to 1.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>   [arch/arc bits]
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove struct mem_cgroup_lru_info and fold its single member, the
variably sized nodeinfo[0], directly into struct mem_cgroup.  This
should make it more obvious why it has to be the last member there.

Also move the comment that's above that special last member below it, so
it is more visible to somebody that considers appending to the struct
mem_cgroup.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is very similar to commit 84d96d89 ("mm: madvise:
complete input validation before taking lock"): perform some basic
validation of the input to mremap() before taking the
&current->mm->mmap_sem lock.

This also makes the MREMAP_FIXED => MREMAP_MAYMOVE dependency slightly
more explicit.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix two obvious problems:

1. We have registered msm_iommu_driver first, and need unregister it
   when registered msm_iommu_ctx_driver fail

2. We don't need to kfree drvdata before kzalloc was successful.

[akpm@linux-foundation.org: remove now-unneeded initialization of ctx_drvdata, remove unneeded braces]
Signed-off-by: NLibo Chen <libo.chen@huawei.com>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There have been changes in the locking scheme of fsnotify but the
comments in the source code have not been updated yet.  This patch
corrects this.
Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In inotify_new_watch() the number of watches for a group is compared
against the max number of allowed watches and increased afterwards.  The
check and incrementation is not done atomically, so it is possible for
multiple concurrent threads to pass the check and increment the number
of marks above the allowed max.

This patch uses an inotify groups mark_lock to ensure that both check
and incrementation are done atomic.  Furthermore we dont have to worry
about the race that allows a concurrent thread to add a watch just after
inotify_update_existing_watch() returned with -ENOENT anymore, since
this is also synchronized by the groups mark mutex now.
Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no need to use a special mutex to protect against the
fcntl/close race (see dnotify.c for a description of this race).
Instead the dnotify_groups mark mutex can be used.
Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code under the groups mark_mutex in fanotify_add_inode_mark() and
fanotify_add_vfsmount_mark() is almost identical.  So put it into a
seperate function.
Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For both adding an event to an existing mark and destroying a mark we
first have to find it via fsnotify_find_[inode|vfsmount]_mark().  But
getting the mark and adding an event (or destroying it) is not done
atomically.  This opens a race where a thread is about to destroy a mark
while another thread still finds the same mark and adds an event to its
mask although it will be destroyed.

Another race exists concerning the excess of a groups number of marks
limit: When a mark is added the number of group marks is checked against
the max number of marks per group and increased afterwards.  Since check
and increment is also not done atomically, this may result in 2 or more
processes passing the check at the same time and increasing the number
of group marks above the allowed limit.

With this patch both races are avoided by doing the concerning
operations with the groups mark mutex locked.
Signed-off-by: NLino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ->reserved field isn't cleared so we leak one byte of stack
information to userspace.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use proper decimal type for comparison with u32.

Compilation warning was introduced by 780a7654 ("audit: Make testing for
a valid loginuid explicit.")

  kernel/auditfilter.c: In function 'audit_data_to_entry':
  kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
     if ((f->type == AUDIT_LOGINUID) && (f->val == 4294967295)) {
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If both 'tree' and 'watch' are valid we must call audit_put_tree(), just
like the preceding code within audit_add_rule().
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  kernel/auditfilter.c:426: warning: this decimal constant is unsigned only in ISO C90
Signed-off-by: NRaphael S. Carvalho <raphael.scarv@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The old audit PATH records for mq_open looked like this:

  type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023

...with the audit related changes that went into 3.7, they now look like this:

  type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"

Both of these look wrong to me.  As Steve Grubb pointed out:

 "What we need is 1 PATH record that identifies the MQ.  The other PATH
  records probably should not be there."

Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting.  With this change, we get
a single PATH record that looks more like this:

  type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
  dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
  obj=unconfined_u:object_r:user_tmpfs_t:s0

In order to do this, a new audit_inode_parent_hidden() function is
added.  If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reported-by: NJiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>